Write a Review
Our Product / Services
Leading Manufacturer, Supplier & Retailer of Iron Removal Filter.
Iron removal plants can be based on different filtration media, depending on the iron and manganese concentration, the oxygen level, CO2 content and hardness of the water.
Plant principle:First, air is injected in order to oxidize the iron. The oxidized iron will then precipitate on a sand filter. An MnO2 layer in the sand bed will catalyze the oxidation of residual iron. Backwash will be done by water and by air.
Filtration Media choice are:- Sand + MnO2 for high iron concentrations- Calcite for acidic waters- Birm- Greensand
Other oxidation chemicals can be used for highly contaminated waters-Ozone- Chlorine- Chlorine DioxideThese chemicals also have a biocide effect but might interact with other component.
Plant general specifications:
| Deironing | |||||||||||
| Flow (m3/h) | 1 | 2 | 3 | 5 | 7 | 10 | 25 | 35 | 45 | 60 | 85 |
| Filter diameter (m) | 0,4 | 0,5 | 0,6 | 0,8 | 0,9 | 1,1 | 1,6 | 2,0 | 2,4 | 2,5 | 3,0 |
| Filter total height (m) | 1,8 | 1,9 | 2,0 | 2,0 | 2,1 | 2,0 | 2,3 | 2,4 | 2,6 | 2,7 | 2,9 |
| Media volume (m3) | 0,1 | 0,2 | 0,3 | 0,6 | 0,8 | 1,1 | 2,4 | 3,8 | 5,2 | 5,9 | 8,5 |
|
Power consumption (kW) |
0,1 | 0,3 | 0,4 | 0,7 | 1,0 | 1,4 | 3,4 | 4,8 | 6,1 | 8,2 | 11,6 |
PENTA PURE TECHNOLOGIES (PENTA PURE TECHNOLOGIES)
1676, 1st Floor, 2nd Cross, Prakash Nagar, , Rajajinagar, Bangalore, Karnataka - 560021
Share us via
