Plastic Granules #1151023

Made with finer particle size of carbon & black pigment, Available with different loading of carbon black pigment fm 30 % & 40 %, Manufactured with PE, PS, ABS, NYLON, PC base carriers, Black masterbatch Can be used in a wide variety of polymer systems from ABS, HIPS, LDPE, LLDPE, HDPE, and PP homo and co-polymers, MTypical applications include film, compounding, pipe, fiber, and injection blow moldingL, Agricultural, automotive, consumer products, industrial, and packaging.

Introduction

• Available with different loading of Rutile grade Titanium Dioxide fm 30 % to 70 %
• Manufactured with PE, PP PS and EVA base carriers
• Suitable for processing on high speed machines">
• White Masterbatch Made with unique formulation recipe & additives
• Available with different loading of Rutile grade Titanium Dioxide fm 30 % to 70 %
• Manufactured with PE, PP PS and EVA base carriers
• Suitable for processing on high speed machines & multilayer films
• Optimum opacity, high gloss, smooth finish

  Application

Selection of specific applications is made considering various critical factors like, high speed and high temperature extrusion.
Suitable for different applications :

• General purpose or commodity films
• Injection / Blow / Roto Moulding applications
• Flexible packaging
• High Speed and High Temperature Extrusion
• Extrusion Coating / Lamination
• Multilayer film extrusion, etc.

  Benefits

• Excellent dispersion
• Formulations suited for:
• Thick / thin wall applications for Injection and Blow Molding
• Cast, Blown and Extrusion coating Films.
• Ease of incorporation
• Food contact acceptable grades
• Weather resistant grades
• Photographic Paper grades
• Engineering resin grades
• Highly loaded products up to 80%

Conclusion

• The grades of titanium dioxide are carefully chosen to ensure high opacity and good dispersion.
• The base carrier selected has total compatibility with the polymer being coloured.
• Only Rutile grades of Titanium Dioxide are used
• Recommended dosage fm 1 to 2.5 % for injection & blow moulding & 2 to 10 % for multilayer film extrusio

Introduction

• Made with finer particle size of carbon & black pigment
• Available with different loading of carbon black pigment fm 30 % & 40 %
• Manufactured with PE, PS, ABS, NYLON, PC base carriers

Application

• Black masterbatch Can be used in a wide variety of polymer systems from ABS, HIPS, LDPE, LLDPE, HDPE, and PP homo and co-polymers
• Typical applications include film, compounding, pipe, fiber, and injection / blow molding
• Agricultural, automotive, consumer products, industrial, and packaging.

Benefits

• Gives excellent carbon black dispersion & high jet ness value
• Excellent performance alone OR combination with other stabilizers

Introduction

• Colour Masterbatch Made with quality pigments & superior mixing process
• Available with different shades i.e. in transparent, metallic & pearlite special effect
• Manufactured with PE, HIPS, NYLON, PC and ABS base carriers

Application

• Available in full range of shades
• Can be used in the manufacturing of yarn for carpets

Various master batches are developed for the different applications are as follows :

• General purpose or commodity
• Injection / Blow / Roto Moulding applications

 

Benefits

• Improve the appearance and performance of resins to meet your exact specifications
• Good heat stability, light fastness & no migration properties in end product
• Provides excellent processibility, outstanding color stability, and strength
• Offer very high color strength compared to competitive concentrates

  Conclusion

• Made under strict QC system supported by SPECTROPHOTOMETER, which gives unmatched consistency & reliability
• We’ve matched thousands of different colors in virtually every resin on the market
• Our color-matching expertise is backed by the equipment and trained personnel in our advanced QC laboratory
• The pigments are carefully selected for chemical resistance, gas fading resistance, and color fastness

 

Introduction

The 3 main areas where conductive and antistatic MB can be utilized are:

• Static Control Compounds - these prevent damage due to high voltage sparks and surges.
• Spark prevention reduces the explosion hazard when handling hazardous dust or solvent products in packaging applications.
• Surge prevention is intended to protect electronic component during their assembly and whilst in use.

 

Application

• Antistatic packaging
• Handling of electronic components
• Films
• Power cables & accessories
• The automotive industry
• Belts & hoses
• Rollers & seals

 

Benefits

• Good conductivity
• Easy & excellent dispersion
• Easy mixing & processing
• Smooth surface finish
• Good balance of conductive, mechanical & flow properties
• High extrusion throughput
• An excellent price performance ratio

 

Conclusion

There are three levels of static protection which Conductive and Antistatic MB are supplied to meet, these are mainly expressed as SURFACE RESISTIVITY value.

• Conductive - SR <105 ohms/square
• Static Dissipative - from 105 to <109 ohms/square
• Antistatic - from 109 to <1014 ohms/square

Introduction

• Completely Biodegradable Resin is one of the latest products developed by our company
• It is a new type of thermoplastic and environmentally-friendly resin mixed with the unique modified starch and degradable resin
• Completely degraded in natural environment in a short period of time
• Same processibility and service performances as the conventional plastics

  Application

• High-grade garment plastic packaging film
• Mulching film for agriculture
• Cutlery, golf tee
• Biodegradable stationary goods
• Degradable plant pot
• Food packaging films
• Disposables cups, trays, spoons, garbage bags, carry bags, etc.
• Surgical clothes, medical gloves and so on

  Benefits

• Environmental Friendliness
• No harmful residues produced
• Suitable for compost able treatment
• Little heat and no toxic gas generated when burnt.
• Anti-static, easy for printing and smooth in handling.
• Good processibility and can be processed with general equipment. Scraps can be recycled.

  Conclusion

In order to support everyone's awareness of Environment friendliness, we have introduced Biodegradable MB.

 

Who could use :

• Manufacturers of Plastic Sheets / Bags/ Rolls / Injection Moulded products.
• Hospitals, various part manufacturers, individuals, garbage disposal agencies, hotels, supermarket

Introduction

• Contains high performance of enhancing the antimicrobial properties in plastic
• Appearance is fine white
• Can be added at any stage in the processing

  Application

• Agriculture films
• Household products, viz. shower curtain
• Medical disposables, viz. syringes
• Coated fabrics, viz. raincoats, tents, etc.
• Shoe soles & mid soles
• Foam, viz. seat cushions, gaskets, insulation, etc.
• Hygienic wall & floor coatings
• Toys

  Benefits

• Low environmental impact
• Can be protected against bacterial & fungal effects
• Indoor plastics such as used in hospitals, kitchen & bathroom can be kept cleaner & fresher.
• Can be used in a wide variety of polymer systems from PVC, PP, PE, NYLON, POLYSTER, POLYURETHANES & RUBBER

  Conclusion

• Protection from bacterial infects

Optical Brightener Masterbatch

• Contain highly concentrated Brightener chemicals
• It gives smooth & glossy surface of film

  Application

• Suitable for clear & white opaque multilayer & monolayer films
• Filaments
• All extruded products, Jabhala
• In few rotomoulding applications

  Benefits

• Improves optical properties
• Smooth surface
• Glossy surface
• Imparts bluish – purple tint

  Conclusion

• Recommended addition level 0.3% to 1%
• Addition level may vary on the basis of wall thickness of article
• Effective to provide more improvement in natural PP, colours & black

Antistatic Masterbatch

• Based on Stearate type antistatic agent
• Offers the possibility of avoiding electrostatic charging by causing a fast discharge of the plastic’s surface
• Have the ability to absorb moisture
• Allowing for the static charges to dissipate

 

Application

• Antistatic packaging
• Handling of electronic components
• Films
• Power cables & accessories
• The automotive industry
• Belts & hoses
• Rollers & seals
• PE foam

  Benefits

• Good conductivity
• Easy & excellent dispersion
• Easy mixing & processing
• Good balance of conductive, mechanical & flow properties
• High extrusion throughput
• An excellent price performance ratio
• Prevent the static charge
• Stabilize PE foam

  Conclusion

• For permanent static control, antistatic MB is incorporated into the molten polymer. This result in a reduction of the surface resistivity in polyolefins to as low as 109 ohms.
• Thermally stable
• To stabilize the weal foamed cell structure
• Optimum antistatic effect can be obtained if relative humidity is above 45 %

Manufactured using additives from fatty acid amide group, Manufactured on fact migration characteristic additives, Based on extremely pure Frucamide slip additive, Immediate lowering of the co-efficient of friction, Very smooth film surface.

mpact Modifier Masterbatch

• Unmodified polymers viz, PVC, PMMA, PS/SAN are brittle. Even PC, PA or PE will exhibit a brittle to ductile & limited impact strength
• In order to satisfy end-use requirement for rigid applications

Application

• In Acrylic ( Impact Modifier ) in rigid PVC formulation

Benefits

• To get the required impact strength in rigid polymers.

Conclusion

The characteristics are as under :

• The quality of dispersion
• The adhesion to the polymer matrix
• The rubber domain particle size in the matrix
• The rubber glass transition temperature

Nucleating Masterbatch

• PP Base carrier
• 10 % of active ingredient
• Enhances the clarity of PP products

Application

• Injection moulded items
• Extruded films
• Blow moulded containers
• PP based products viz., medical disposables, films, containers, buckets, bottles, etc.

Benefits

• Good clarity
• Reduce the internal haze
• Good optical properties
• Improves clarity in PP products
• Improves stiffness
• Improves stress crack resistance

Conclusion

• 1 to 3 % Let down ratio
• During the process, formation of small size spherulities enhancing clarity through transmission of more light
• Nucleating agent improves the clarity of PP products.

Slip Additive Masterbatch

• Manufactured using additives from fatty acid amide group
• Manufactured on fact migration characteristic additives
• Based on extremely pure Frucamide slip additive

Application

In all kind of Extrusion films

• Can be used in LDPE / LLDPE films to be used on FFS machines

Benefits

• Immediate lowering of the co-efficient of friction
• Very smooth film surface

Conclusion

• Can be available on slow migration characteristic of the additives
• Concentration of this Slip Master batch are depends on polymer type and degree of COF required
• Slow migrating, Low volatility, Does not affect bond strength

U.V. Masterbatch

• Available with concentration of 10 % & 20 %
• Contains high performance HALS TYPE UV stabilizer (HILITE-77)
• Recommended dosage from 1 % to 5 %
• PE - Base carrier resin

Application

Can be used in all type of plastic products made from PP & PE Viz.,

• Food grade applications
• Agriculture films
• Synthetic fibers : PP, PET & NYLON
• Auto plastic applications
• Tarpaulin

Benefits

• Extraordinary UV stabilizer efficiency in polyolefins
• Low colour contribution, low volatility & extraction resistance
• Lower interaction with pigments & fillers
• Excellent performance alone OR combination with other stabilizers
• Provides longer service life and / or reduced cost

Conclusion

• A clear understanding of the UV stabilization theory plus experience with the current practice will provide the foundation for the successful development of new UV stabilized MB formulations
• UV stabilization benefits have been demonstrated with a variety of light stabilizers and combinations in a variety of polymers

We are pleased to introduce ourselves as one of the pioneer and leading color and additive master batch manufacturer & exporter. The company commenced operations in 1987 and has been marketing its products under brand name CONCENTRA. Today we have our manufacturing units in Western India (Vadodara & Daman) & in South Africa. We are exporting our products to Africa, Middle East and Asian countries since 1996. The company is having its head office in Vadodara, Gujarat & branch offices in Mumbai & New Delhi.

Available with different loading of Rutile grade Titanium Dioxide fm 30 % to 70 %, Manufactured with PE, PP PS and EVA base carriers, Suitable for processing on high speed machines", White Masterbatch Made with unique formulation recipe & additives, Available with different loading of Rutile grade Titanium Dioxide fm 30 % to 70 %, Suitable for processing on high speed machines & multilayer films, Optimum opacity, high gloss, smooth finish.Selection of specific applications is made considering various critical factors like, high speed and high temperature extrusion, General purpose or commodity films, Thick thin wall applications for Injection and Blow Molding, Cast, Blown and Extrusion coating Films.

Special Additive MasterbatchAntistatic Master BatchImpact Modifier Master BatchNucleating Master BatchOptical Brightener Master BatchPlastic Processing AidSlip Additive Master BatchU. V. Master Batch