Our Products #5444642

PESCO BEAM Bio-diesel Systems are the most complete systems in the market today. Our Bio-diesel Systems include all the process modules to deal with a wide variety of feedstock, including yellow grease, canola oil, soy oil, palm oil and also animal fats. Our systems are designed to efficiently convert these fats and oils into bio-diesel, obtaining better than 98% conversion.

• Our Biodiesel Systems include all the needed modules to recover valuable by-products such as methanol and glycerin.
• The systems are continuous and computer controlled.

We guarantee that our systems will produce products which will meet ASTM, EU, and Turkish Standards.

PESCO BEAM designs and builds systems which recover useable, clean lubricating oils and diesel fuel from dirty, used crankcase oils, hydraulic oils, mist oils, and other contaminated oil. These systems are skid mounted and completely assembled. Thirteen Used oil re-refining systems built by us are in operation at various locations in the world.

PESCO BEAM has a unique approach to Used Oil Re-refining, combining many aspects that produce a superior product, without producing more waste which can damage the environment!

• Our Systems are as small as 50 Gallons per Hour to as large as 7500 Gallons per Hour or higher, rated for 24 hours continuous operation for 330 days a year.
• They are less expensive than most comparable types.
• Our multistage systems can deal with a large variety of feed oils.
• Our design will address your product requirement from VGO (vacuum gas oil) to the finest base lubes and anything in-between.
• Combined with our Regenerative Media Based Polishing system, our systems give lubes to Group 1 and depending on the feed stock, Group 2
• When our client seeks products to Group 2+ & Group 2+, we offer the Hydrotreating system with our re-refining plant.
• Our systems are PLC controlled and function automatically. They can also be monitored from PESCO BEAM offices for extended operational support.

PESCO BEAM designs and builds advanced systems to recover useable, clean solvents.

We have built more than 20 on-site recovery systems. The innovative PESCO BEAM system recovers the usable solvent from the waste, then cleans and prepares the product for reuse by the factory which generates it. This saves the client money in solvent purchases, waste disposal, and environmental and public health liability.

PESCO BEAM has designed and built systems for many companies, including:

DupontVivendiFina TotalSolvaySolutiaPPG

Our Systems include thin film and forced circulation evaporators, plus fractionation columns operating at pressure or under vacuum.

SOLVENTS WE RECOVER:

Mineral SpiritsEthylene GlycolPropylene GlycolN Methyl PyrrollidoneDimethyl SulfoxideAcetoneEthyl AlcoholIso PropanolMethyl AlcoholAcetatesLimoneneMany others

PESCO BEAM designs and builds vapor phase and liquid phase molecular sieve systems that can be used to remove water ETHANOL, IPA and all types of neat solvents and azeotrope mixtures. Molecular Sieve Systems dewater azeotropic mixtures such as Alcohols and Acetates without the use of benzene, hexane or other volatile or hazardous extractors . Our systems can be skid mounted or field constructed and are made of stainless or carbon steel. PESCO BEAMs experienced staff can work with you to create a custom system to meet your specific needs or help to rebuild and make your current system more effective and efficient.

FEATURES :

• Water levels to a few ppm or less
• 10 to 1, 000 Gallons Per Hour
• Vapor or liquid phase operation
• Skid-Mounted or Field Constructed
• Stainless or Carbon Steel
• Steam or Hot Oil heated
• Manual to Fully Automated
• Stock Design or Custom Build

The market has multiple sources for media based lube distillate polishing systems. Almost all of them offer such systems based on their experience with recycling products such as transformer oil. Lube oil distillate, primarily from plants that distill used motor oil, is however a completely different product ask us. We found this truth after spending millions of dollars on such initial systems from the market place, and with the need to preserve our performance credibility, we spent time, effort and capital, understanding the intricate engineering behind polishing lube oil distillate through such media based systems. Simply stated, a PESCO BEAM designed and supplied LPS, works.to reward its owner with a top quality Group 2 Base Oil at a very affordable cost. And you can bank on it.

Lube oil distillates have completely different and complex set of properties when compared to other oils such as transformer oil. They flow differently, require completely different residence times and to get continuous production, call for careful analysis of the various cycle times. For example, where others estimated a system having 24 columns, the need was for 168 columns with feeding and exhaust systems to match. Some of the systems from others merely have the ability to perform during start-up, since the polishing media is absolutely fresh. By the time the supplier has left the plant after commissioning, performance starts tapering off, with every cycle. The number of plants having such non-performing (or poorly performing) systems, calling for PESCO BEAMs assistance to set them right are many and dispersed across the globe.

Why other systems perform below par:

1. They are designed without adequate lube oil product knowledge;
2. They flow the feed differently from ours, leading to inefficient contacting with the media;
3. Their designs do not provide for differing viscosities of the oil and hence the system is not balanced;
4. Uncontrolled reactivation that leads to much shorter media life;
5. System design not balanced. Consequently, production waits for columns to be ready.

FEATURES

• Custom designed and sized for your feed and product properties;
• Possibility of adjusting oil flow to give different product color with the clear understanding on how such adjustments will affect production;
• The reactivation, which is thermally done, calls for proper management to ensure that the media life is high and this is in-built in our operation method;
• Balance is the key word for continuous production. In our systems you do not wait; they are designed to produce continuously;
• PLC controlled;
• Optional environment mitigation equipment to deal with emissions from the system;Optional media filling arrangement.

We have built more than 20 on-site recovery systems. The innovative PESCO BEAM system recovers the usable solvent from the waste, then cleans and prepares the product for reuse by the factory which generates it. This saves the client money in solvent purchases, waste disposal, and environmental and public health liability.Our Systems include thin film and forced circulation evaporators, plus fractionation columns operating at pressure or under vacuum.

Adapted from crude oil refining technology for the used oil recovery sector, PESCO BEAM offers Solvent Extraction to upgrade recovered base lube distillates(or VGO) to base lube oils having Group I Group II properties.PESCO BEAMs Solvent Extraction Process effectively improves typical recovered oil by: increasing the saturates by 3 5+%, decreasing Sulfur levels.

PESCO BEAMs Ethanol plants have made ethanol from industrial sugar and starch wastes and agricultural crops.

The Ethanol plants included innovations such as modern high rate anaerobic waste treatment systems which generated methane gas and liquid fertilizer which fertilized the surrounding fields.

One plant researched and developed processes to convert ligno-cellulosic residue from forestry and agriculture waste into ethanol and other high value products.

PESCO BEAM partners with Green Industrial Technologies(GIT) of Athens, Greece to bring you the most up-to-date hydrotreaters. This system can include advanced features such as amine hydrogen recovery systems to reduce hydrogen consumption, and we can include low cost electrolytic hydrogen generators as well. The cost of our hydrotreaters is very reasonable due to our ability to manufacture and assemble them in our own manufacturing shops.

A hydrotreating unit upgrades:

• Distillates from used oils to produce mainly base oils of high quality (Group II+);
• Various slops and low value products of crude oil refineries (paraffinic, aromatic), for the production of fuels and lubricants.

The hydrogen treating process takes place at a very high pressure of 100 atm. The products are either very high quality base oils (Group II, Group III) or very low sulphur gas oils (

A Continuous Conduction Heat Transfer System is an equipment that very efficiently dries, heats or cools material using conduction heat transfer through the walls of specially shaped, rotating, hollow heat transfer elements (paddles) mounted on a shaft(s). Heat is also transferred through the jacket of the trough that houses these elements, making the heat transfer area available very high and the operation, very efficient.

The equipment does not use any air for the heat transfer process, eliminating the need for large dust separation and collection equipment, normally associated with continuous convection heat transfer equipment. A very small draft of "carrier air" to remove water vapor evaporated during the process is required to complete the system integration efficiently when operating under atmospheric pressure.The system can be operated under vacuum for recovery of solvents and when dealing with heat sensitive materials that require lower drying temperatures.

ADVANTAGES:

Operational:

• High thermal efficiency
• High heat transfer coefficient
• Easy to control during operation
• Applicable for very wet and sticky materials
• No breakage of granules owing to low speed revolution

APPLICATIONS:

• Drying (with or without recovery of solvent)
• Organic and inorganic materials like PVC chips, Nylon pellets, Sodium Chloride, Ammonium nitrate;
• Nutrition, food products;
• Various highly wet filter cakes like Precipitated Calcium Carbonate;Starch;
• Natural products like bran, grains, sawdust, etc;
• Paint and other sludge with or without solvent recovery.
• Heating (Preheating/Sterilization)
• Cooling

PESCO BEAM has a pilot plant that can be made available at a nominal cost for testing your material, its compatibility and to prove the use of such a system for your application.