Petron Thermoplast

Kamla Nagar, Agra, Uttar Pradesh

Pipes under pressure with cold chemical weld jointing systems (solvent welding) using suitable solvent cement (TemperGLUE weld-on) and primer-cleaner.

PVCC Pipe Technical Specifications:

• Size range d 16 ÷ d 225 (mm)

Nominal pressure:

• SDR 13.6 (PN16) with water at 20^o C
• SDR 21 (PN10) with water at 20^oC
• Temperature range 0^oC ÷ 100^oC

Use:

• For water

Material:

• CPVC

Other characteristics:

• welded

Outer diameter:

• Min - 16 mm
• Max - 225 mm

Pressure:

• Min - 13.6 bar (197.25 psi)
• Max - 21 bar (304.58 psi)

Temperature:

• Min - 0^oC (32^oF)
• Max - 100^oC (212^oF)

• and strong.

Schedule 40 and 80 pipe meets or exceeds the requirements of ASTM F441. Associated fittings meet or exceed the requirements of ASTM F437 (scheduled 80 threaded) and ASTM F439 (schedule 80 socket).

Asystem designshould be done in accordance with the manufacturers instructions. The design should also take into consideration specific factors, including: pressure and flow requirements, friction loss, operating temperatures, support spacing, anchoring, bracing and thrust blocking, joining methods, and thermal expansion and contraction.

• Maximum design pressure ratingsshould not exceed those listed (see Pressure Ratings). Pressure ratings apply to water at 73F (23C). For temperatures greater than 73F, see the derating factors listed above. For fluids other than water, the full pressure rating may not apply.
• Schedule 80 pipeoperating above 130F (54.4C) should not be threaded. Threaded pipe should be derated to 50% of the pressure rating of the piping at the system operating temperature.
• Flanged systemsof any size should not exceed 150 psi working pressure at 73F (23C). Follow the manufacturers recommendations for temperature derating factors for services greater than 73F.
• Corzan valvesare typically rated at 150 psi up to 240 psi at 73F (23C) (pressure rating varies with valve type and manufacturer). Consult the valve manufacturer for pressure ratings and temperature derating schedules.
• In allhydraulic calculations, a Hazen-Williams friction factor of 150 should be used.

Industries often require Corzan CPVC piping system which are made of material that can withstand tough environments ideally this means a cost effective material that will resist corrosion while also providing mechanical strength safety and long lasting performance

CPVC material having an operational temperature range from 0 to 80 C are suitable for high temperature environment that excellent mechanical characteristics such as a high tensile strength stiffness and impact strength are evident at increased temperature

CorzanCPVC pipe and fittings are manufactured from CPVC compound manufactured by Lubrizol. Our piping material is the only CPVC for industrial systems that meets cell class 24448 for high impact and high heat distortion temperature pipe. Standard CPVC compounds have a 23447 cell classification.

Corzan piping is available in iron pipe sizes (IPS) through 24-in. diameter. Cell class 24448 piping material is available in sizes from -in. to 8-in. from select manufacturers, and pipe sizes greater than 8-in. meet cell class 23447.

NSF International certifies corrosion-resistant Corzan pipe for use with potable water. It is available for use in both pressure bearing and drain applications at temperatures up to and including 200F (93.3C). Pressure ratings vary with schedule, pipe size, compound type and temperature.