Other Products / Services #5814665

WU : UP TYPE
As the input shaft is upperside of the worm gear of a reducer and the output shaft extrudes horizontally, Pulley and Sprocket can be easily attached to this type.

WB : BOTTOM TYPE
The input shaft is lowerside of the worm gear of a reducer and the output shaft extrudes horizontally. In case of Big or Double Type, WB (Bottom Type) is more proper because of low friction.

WV : VERTICAL TYPE
The output shaft extrudes perpendicular to the base. This type is for low speed and high torque such as agitator.Newest high precision machines like shaving drill machine are used to ensure product precision, efficiency and reliability.

DW : DOUBLE TYPE
Consisting of two reducers, this type can get high reduction rate up to 3600 : 1. Caution is needed because available input power is one step lowered.

IEC FLANGE OR MOTOR ATTACHED TYPE
For customer's convenience, these types are released with motor attached or motor flanged attached. 50 155 types are made up of international IEC standard flange and input shaft, so moto

Efficient
Higher 1.5 times of efficiency than double worm reducer.
Stronger
Single solid casting case ensures higher stiffness and strength
Compatability
Can be mounted in Horizontal or vertical or right stand as you wish.

Tupes

Solid Shaft Type
Solid bas output shaft with key way for pulley or coupling.
Hollow Sahft Type
Hollow output shaft to couple driven shaft without coupling but direct
Geared Motored
Motor assembled with Gear Box in one unit.

Hollow Shaft Mounting
Flange Mounting
WB : BOTTOM TYPE
Universal Mounting
Maintenance Free

MTW is a series of Hollow Shaft Worm Reducer with/without motor for medium and smaller size. Output shaft is designed hollow shaft as a pipeline for you to mount easily. Also mounting surface is universal so that you can install the reducer on your base with bottom, top, sides, torque arm or any other way you intent.Aluminum case with light mass will satisfy you in automations or material handling system.

Model size :#25 #155
Power :6W 7.5KW (1/8Hp 10Hp)
Gear Ratio :1/10 1/60 for Standard
(more than 1/60 is available by order)

Types of Traction Machine:
FOR ELEVATOR : SY001, SY002
FREIGHT & TOWER PARKING : SY003, SY003-35S, SY004, SY004B, SY005
TOWER LIFTER : STL001A, STL001B


Necessary Specifications for Order:
APPLICATION : Elevator, Freight, Parking System, Tower Lifter
MOTOR POWER : ( )kW x ( )P x ( )Hz
USEFUL LOAD : ( )kg
WEIGHT OF CAGE : ( )kg
WEIGHT OF COUNTERWEIGHT : ( )kg
LIFTING SPEED : ( )m/min
LIFTING HEIGHT : ( )m
SUSPENSION (ROPING) : 1 : ( )
WIRE ROPE : ( ) x ( )R
CONTROL METHOD : ( )

Users of electric motors and OEM manufacturers covering a diverse range of industrial applications have been depending on the performance, reliablity and quality construction of Rotomotives custom designed motor products.

Our design engineers are trained to implement development projects and build customized solutions at a significantly lower cost. Our manufacturing infrastructure and dedicated supply chain facilitate the conversion of designs into prototypes and finished products at a cost which enable or customer to gain a significant competitive edge.

Rotomotive offers motors for various applications in industries like wind energy, hydraulic power packs, electric transportation, construction, mining, HVAC blowers, cooling units and smoke evacuation system.

We use CAD extensively and can share 3D files, data sheets, quality plans and our team of engineers can work closely wi

The new patented BOX series of worm gear units is made with die-casting aluminium housing from size 30 up to 90, and in cast iron from size 110.

Delfire series of motors are designed to be a part of smoke and heat control ventilation systems. These systems create a smoke free layer above the floor by removing the smoke. Thus, they improve conditions for safe escape/rescue of people, animals and the protection of property. They also permit the fighting of fire while still in its early stage.

They are also used with jet fans to convey smoke, NOx, carbon monoxide and other gases from tunnels, car parks, basement areas and the likes. In many cases they operate in the hazard prevention mode. In case of fire outbreak, the temperature rises rapidly. Delfire motor work for a guaranteed period of 1 or 2 hours at a continuous temperature of 300, 250 & 200 Celsius, depending upon requireme

We are offering various sorts of quality Filter Paper Rolls that are manufactured and developed by our highly experienced team as per market trends.
These rolls are fabricated from quality raw materials and are considered highly suitable for the coolant Filtration dynamic filtration for various commercial, residential, pharmaceutical and industrial applications.
They have earned enough appreciation for their performance, effectiveness, reliability, easy maintenance and long serv

DMI-1 with Dosage 0.01 cc, 0.03 cc, 0.05 cc, 0.10 cc, 0.16 cc Per Stroke
DMI -2 With Dosage 0.25 cc, 0.40 cc Per Stroke.
DMI -3 With Dosage 1.00 cc, 1.60 Per Stroke

Note: Above metering injectors are available in M.S. as well as brass with honed bore Nitrile rubber parts & accurate dosage

Dropco has developed different types of oil recirculating systems as per design provided by the customer's This normally contains main oil tank (reservoir), elctric motors, pumps, pressure switch, float switch temperature indicator, heat exchanger, pressure gauge, flow switch strainers, duplex filter, drain valve, ball valve, heating elements and electronic control panel. 5000 cc (5kg),

Note - Specification should be provided by customers as per their requirement.

Dropco has developed different types of oil recirculating systems as per design provided by the customer's This normally contains main oil tank (reservoir), elctric motors, pumps, pressure switch, float switch temperature indicator, heat exchanger, pressure gauge, flow switch strainers, duplex filter, drain valve, ball valve, heating elements and electronic control panel.

Note : Specification should be provided by customers as per their requirement.

DMET-103 Electronic Lubrication timer with ON TIME 5 sec. (fixed) OFF TIME 1, 2, 4, 8, 16, 32, 64 & 128 min. (adjustable) with the help of Rotary Switch. A 8 LED's bar makes possible to read out the time over with the rate of 1 minute.

Input : 220V AC, /110 VAC
Indication : Main On, Lub. On

DMEC-501 Panel Mount Type, ON TIME 5 sec. (fixed), OFF TIME 1, 2, 4, 8, 16, 32, 64, 128 min. (adjustable) with the help of Rotary Switch. 8 LED's bar makes possible to read out the time over with the resolution of 1 minute.

DMEC - 502
Wall/ Din Rail Mount Type, ON TIME 5 sec. ( fixed), OFF TIME 1, 2, 4, 8, 16, 32, 64, 128 min. (adjustable) with the help for Rotary Switch. 8 LED's bar makes possible to read out the time over with the resolution of 1 minute.

DMEC - 5/2-120 (B.I.C.)
Wall Mount Type, ON TIME 5 sec. (fixed) and OFF TIME 1, 2, 4, 8, 16, 32, 64, 128 min. (adjustable) Inching Switch for manual Lubrication. Built in Contactor.fuse holder Main on Lubrication on LOW LEVEL LOW PRESSURE INDICATION.

Dropco dual line grease lubrication systems is a very high pressure motorised grease pump. Normally used for international working for various applications in different industries.

This systems basically comprise of :
Pumpind station
Inline filter
Pressure Change over value
End pressure relay
Dose feeder (blocks)
Tubing & fitting
Electronic control panel
Grease barrel pump (transfer pump) optional

This systems is best suitable for lubrication in turbines, earthmoving equipments, steel plants, blast furnaces, shovels, excavators, sugar plant, cements plants etc.

Model DDGL-30

Models DMRL - 5-6
Reservoir Cap. - 5 ltr., Number of Outlets of Plunger Pump-6 nos. Maximum Pr. 250 Kg/ Cm, Motor .25 HP/ 1.8 kw, 3 Phase, 415V, AC, 1340 RPM, Foot Mounting, Output max. 0 to 0.25 cc per stroke (adjustable) at each outlet independently.
DMRL- 15-6
Reservoir Cap. - 15 Ltr., Number of Outlets of Plunger Pump- 6 Nos. Maximum Pr. 250 kg/Cm, Motor .25 HP/ 1.8 kw, 3 Phase, 415 V, AC, 1340 RPM, Foot Mounting, Output max. 0 to 0.25 cc per stroke (adjustable) at each outlet independently.
DMTL 15-12
Reservoir Cap. - 15 Ltr., Number of outlets of Plunger Pump- 12. Nos. Maximum Pr. 250 Kg/ Cm, Motor.25 HP/.18 Kw, 3 Phase, 415V. AC, 1340 RPM. Foot Mounting, Output max. 0 to 0.25 cc per stroke (adjustable) at each outlet independently.
Note: Rreservoir Cap. & No. of Plunger Pump can be increased or decreased as per customer requirement.

DFSH 01, 02 DESV 01, 02

For sensing min. Oil level electrically with NO or NC ( Top ON or Bottom ON ) contact. Horizontally / vertically, (220V AC / 24V DC, 1 AMMP.) ( All models of float switches are potential free. )

DPS 830, DPS 320, DPS 020

Pressure range 8-30 kg/Cm2 (adj.)
Pressure range 3-20 kg/Cm2 (adj.)
Pressure range 0-20 kg/Cm2 (adj.)

( FOR LUBRICATION / HYD, OIL, 220 V AC, 5Amp., POTENTIAL FREE)

Reservoir Cap. - 3Ltr, Motor, 12kw.415v AC
Discharge - 1Lpm,
Pr. Setting - 12-15 kg / cm2with pressure switch and float switch (vertical / horizontal )
Optional - Electronic lubrication controller

Model: DMPA 0.5/3, Discharge: 0.5-3 Lpm, Motor: 0.25 H.P.(0.18KW)
Model: DMPA 6, Discharge: 6 Lpm, Motor: 0.5H.P(0.37KW)
Model: DMP16, Discharge: 10 Lpm, Motor: 1.H.P(0.75KW)
Model: DMPA 25, Discharge: 25 Lpm, Motor: 2H.P(1.5KW)
Model: DMPA 40, Discharge: 40 Lpm, Motor: 3H.P(2.25KW)

Model DBr-GP-25
Reservoir Cap. - 25 Kg.
Discharge - 300 to 400 gms per minute, Max. Pr.-125 Kg/Cm. with rubber hose, Grease gun & Trolley mounted.
DBr-GP-50
Reservoir Cap. - 50 Kg
Discharge - Discharge-300 to 400 gms per minute, Max. Pr.-125 Kg/Cm. with rubber hose, Grease gun & Trolley mounted

Above mentioned models are pneumatic operated type of barrel grease pump. 5-7 kg/cm air pressure is required for proper working of this pump. The pressure plate or dead weight has been provided in these pumps to avoid the air gap. These pumps are suitable for transfer the grease and pressurised filling of different pump i.e pneumatic operated grease pump model DPn-GP 1500- 10 & grease feeder model DGF - 250, DGF- 500 and radial lubricators.

NOTE :- Remove the pressure plate or dead weight outside from the bottom of Reservoir before filling the grease in the reservoir. Insert the pressure plate or dead weight in reservoir after filling the grease in the reservoir.

DROPCO hose reel assembly is specially designed for oil and grease lubrication in different sizes like 1/4, 1/2 & 3/8 Dia and 5 mtrs., 10 mtrs. & 15 mtrs. length with R-2 rating hose in coiled shape.

Grease gun and couplers can be supplied with hose as per users need for lubrication.

We are manufacturer and exporter of Chip Conveyors For Auto Industries.
We provide these at reasonable rates.
These Chip Conveyors For Auto Industries are easily available in market for our clients.

We offer a diverse range of drum type magnetic separators.
Our range is offered keeping in mind our client's varied requirements and they are extensively and effectively utilized to remove iron particles from coolant.
Our drum type magnetic Separator is fabricated from high quality magnets, which makes them effective and capable enough to attract fine and weak ferrous dusts and scraps from heaps of materials.

Oil skimmers are mainly used to remove tramp oil in the coolant.
Due to tramp oil it reduces the coolant life & affect on component finish.
We are a manufacturer and exporter of these Belt Type Oil Skimmers.
We offer these at affordable rates.

Advantages:
Made from a non inserted polypropylene felt with a glazed surface finish, the standard bag incorporates the welded seam design.
The F Neck ring provides hermetic sealing,
preventing steel ring bypass problems.
The welded seam eliminates unfiltered liquid bypass occurring due to needle holes.
The PE filter bag is made from non inserted polyester, and can be ordered with the PE Neck ring.

Fractional Horse Power Reversible AC Motor or simply known as FHP Reversible AC Motor is asynchronous motor, a combination of Induction Motor and continuously acting internal friction brake. Spring loaded PTFE bushes acting as internal brake, minimises the overrun of rotor after the electric supply is switched off. FHP single phase Reversible motor requires capacitor to start and run while three phase Reversible motor does not require a capacitor.

The typical no load speed of the ac fhp reversible motor at 50Hz supply is 2880 RPM for two pole winding, 1440 RPM for 4 pole winding, 960 RPM for 6 pole winding, 720 RPM for 8 pole winding and so on. By attaching a gearbox of desired ratio, it becomes low RPM Gear Motor.

Depending upon requirement for the connection, induction motor has lead wires or Terminal Box.

Suitable for short duty and quick reversal, these motors rotate in clockwise and anticlockwise direction.

Square Frame sizes are 65 mm, 80 mm, 90 mm
Output powers are 12 watt, 25 watt, 60 watt, 90 watt, 180 watt
Rated Torque from 0.03 N.m to 20 N.m
Inline Gear Motor with keyway type shaft and Motor with D type Round Shaft

Fractional Horse Power Induction Motor or simply known as FHP Induction Motor is asynchronous motor in which the AC electric current in the stator winding produces rotating magnetic field. This induces current in the squirrel cage rotor and it starts rotating. FHP single phase induction motor requires capacitor to start and run continuously while FHP three phase induction motor does not require a capacitor.

The typical no load speed of the ac fhp motor at 50Hz supply is 2880 RPM for two pole winding, 1440 RPM for 4 pole winding, 960 RPM for 6 pole winding, 720 RPM for 8 pole winding and so on. By attaching a gearbox of desired ratio, it becomes low RPM Gear Motor.

Depending upon requirement for the connection, induction motor has lead wires or Terminal Box.

Suitable for continuous operation, induction motors rotate in clockwise and anticlockwise direction.

Square Frame sizes are 65 mm, 80 mm, 90 mm
Output powers are 12 watt, 25 watt, 60 watt, 90 watt, 180 watt
Rated Torque from 0.03 N.m to 20 N.m
Inline Gear Motor with keyway type shaft and Motor with D type Round Shaft

AC single phase speed control motor is a combination of Induction motor with taco generator for feedback & Electronic speed controller. The supply is given to Electronic speed control unit which controls the phase angle of power being supplied to the motor. The feedback is taken from the speed control motor to maintain the desired speed.

Suitable for continuous operation, the speed of the motor can be varied by rotating knob of electronic controller over a wide range of 90 1400 RPM for 50 HZ supply. The speed can be reduced further by attaching gearbox.

The Torque of motor decreases as the speed is reduced.

Square Frame sizes are 80 mm, 90 mm
Output powers are 25 watt, 40 watt
Rated Torque from 0.04 N.m to 20 N.m
Inline Gear Motor with keyway type shaft and Motor with D type Round Shaft

Centrifugal Blowers move air by means of centrifugal force generated by a rotating cylindrical impeller. Used for applications where increased air pressure, increased static pressure or high airflow is required. Centrifugal Blowers have a small outlet, which concerntrates air in a single direction and are therefore suitable for local cooling.

Centrifugal blower provide concerntrated airflow in a single direction suitable for forced cooling or heating.

Air Flow capacity is 100 CFM, 240 CFM, 480 CFM

AC single phase speed control motor is a combination of Induction motor with taco generator for feedback & Electronic speed controller. The supply is given to Electronic speed control unit which controls the phase angle of power being supplied to the motor. The feedback is taken from the speed control motor to maintain the desired speed.These are High Starting Torque, Wide Speed Range, single phase and three phase torque motors.

The speed of Torque Motor can be varied easily by changing the voltage supplied to the motor. However the torque is highest at zero speed and decreases steadily as the speed increases.

Depending upon requirement for the connection, motors have lead wires or Terminal Box.

Suitable for continuous duty variable speed, stable operation at low speed or locked rotor condition.

Square Frame sizes are 65mm, 80 mm, 90 mm
Output powers are 3 watt, 10 watt, 20 watt
Rated Torque from 5 N.m to 10 N.m
Inline Gear Motor with keyway type shaft and Motor with D type Round Shaft

Delta's reliable and precise sensor products offer the best comprehensive solutions for sensing and detection that are adaptable to a range of environments and detecting distances. Customers can select Deltas sensor products to meet various demands on a variety of equipment and production lines. Deltas smart sensors feature a slim design with different exteriors and can be applied to a wide range of applications, such as food and beverages, packaging, pharmaceuticals, electronic component equipment, rubber and plastics, warehouses, machine tool industries, and other industrial automation production lines. All sensor types offer stable detection quality and superior performance, providing best solutions for smart manufacturing.

In the automated production process, a power supply is the basic component that requires high stability and safety protection functions. The DVP series, CliQ series DIN rail mounting models and the PMC/PMT panel mounting models, are highly efficient and stable industrial power supplies. Delta Electronics, the global leader in power and thermal management solutions, is unsurpassed in professional design and experience in power supplies.

A pressure sensor is a gas pressure measurement device. The measurable pressure currently ranges from -100kPa 100kPa and -100kPa 1, 000kPa. Users can obtain pressure change signals with pressure sensors they develop. The 2 output signals and 1 analog output signal inform the host controller to conduct relevant control, allowing different systems to reach a stable control status in a short time.

Built-in 32-bit high speed and high processing dual CPU for multi-tasking operation for enhanced performance
* High-speed communication servo drives and high performance, high resolution servo motors provide fully digital data transmission and improved noise immunity capabilities
* High speed and high precision motion control with the aid of Deltas DMCNET high speed motion control system
* Multi-block look-ahead of acceleration/deceleration before interpolation for complete contouring control balances speed and precision to improve processing efficiency and ensure machining productivity
* A user-friendly Human Machine Interface for direct auto-gain tuning adjustment and parameter back-up of servo system
* Data synchronous management between a PC and an NC via Ethernet communication network
* CNC Soft software allows users to build custom screens for user-defined operation
* Serial I/O module for flexible system configuration and extension
* USB interface for easy data access, convenient data backup and parameter copies for fast installation
* Deltas ECMC series servo motors for feed axes are equipped with high-resolution 20-bit motor encoder and up to 1 kHz speed response frequency
* Deltas 3-axis synchronous ASDA-M servo system offers excellent multi-axis motion control with only one CPU and advanced synchronous gantry control
* PN power sharing of multiple axes for energy saving
* Built-in fine interpolation commands, friction compensation, and full-closed loop control functions
* For high-speed CNC tapping machinery, Deltas ECMS series high-speed permanent magnet spindle motor features a rated speed of 6000 r/min and maximum speed of 12000 r/min
* Connecting to energy-saving C-Box for power storage absorbs brake energy regeneration and reduces electricity usage by more than 50%

Temperature controller is a measurement device used on temperature control. Thermocouple-type and resistor-type temperature controllers measure temperature electronically, obtaining the temperature change from the sensor and sending the measured data to the electronic processor. The output device will then control the temperature variation within a specific range.

Delta's DT series temperature controller has fast output response, accurate PID parameter auto-tuning, support Modbus communication protocol and is built-in with various output types, allowing different systems to reach a stable control status very quickly. Besides, all series are complied with international installation dimension and CE, UL international safety approvals.

A human machine interface (HMI) is a platform which permits interaction between users and automation equipment. Deltas HMI products provide various communication ports for fast communication and convenient control of a diverse range of machines, systems and facilities. The color touchscreen enables intuitive parameter entry and a variety of ways to display variable data, including trend graphs and alarm elements. The high resolution LCD display visualizes operating, monitoring and efficient control in real time. In addition, the user-friendly editing software guides users in quickly creating easy-to-navigate visual icons and easily designing intuitive monitoring screens for applications, while making adjustments, scheduling, and programming operational sequences that enhance flexibility and save development time. This achieves rapid system development that simplifies wiring and installation, saves operating expenses, and makes systems more efficient, eliminating time-consuming adjustment and additional maintenance costs.

Delta's DVP series programmable logic controllers offer high-speed, stable and highly reliable applications in all kinds of industrial automation machines. In addition to fast logic operation, bountiful instructions and multiple function cards, the cost-effective DVP-PLC also supports various communication protocols, connecting Delta's AC motor drive, servo, human machine interface and temperature controller through the industrial network in to a complete "Delta Solution" for all users.

As the technology of microprocessor unit becomes more advanced and much further, the development and cost effectivity of permanent magnet manufacturing technology for servo motor and high power and high performance semiconductor power devices is improved continuously. Therefore, AC servo motor and AC servo control system have become the basic techniques for accomplishing automation control technology in current industry field.
Delta servo system is an omnibearing integrated servo system which is based on Delta's strength in industrial and electronic technology and developed for different customers' requirements of various application machine tools. All ASDA series servo drives are provided with a superior digital signal processor (DSP) which represents a high-speed performance of the control circuit loop. Besides, the other features of Delta ASDA series, including gain tuning, smooth motor operation and software analysis / monitor function, also provide high-speed and high-precision motion control for a wide range of industrial automation applications.

With modern power electronics and advanced microprocessor technology, Delta's AC Motor Drives are able to efficiently control motor speed, improve machine automation and save energy. Taking advantage of our strong position in power electronics technology, Delta's VFD Series of AC motor Drives has evolved rapidly. Each Drive series is designed to meet specific application needs. Our AC Drives accurately control speed and torque, smoothly handle an increased load, and provide numerous custom control and configuration operating modes. Our AC Motor Drive product line provides a full range of motor control technologies and is used throughout a wide range of industries, to enhance and improve machine automation.