• Dimensions55 x 80 x 60 cm
• Weight70 kg

a) Precision Automated Atmospheric Distillation Analyzer Conforming to Standards: * ASTM D86, IP 123, ISO 3405 * ASTM D850 * ASTM D1078, IP 195 A Programmable fully automated microcontroller based stand alone or PC operated Distillation Apparatus Model AutoDist with inbuilt refrigerator, straight forward and user friendly windows based software. AutoDist is designed to perform automatic atmospheric pressure distillation analysis of gasolines, fuels, oils, solvents, aromatics, napthas, kerosenes, hydrocarbons and other volatile products.

Thermogravimetry is based on the continues recording of mass variation of a sample specifically related to temperature change. The method can be used to analyse organic, inorganic and synthetic materials. Thermostep of Eltra can determine multiple parameters such as moisture ash gypsum purity etc. on each sample during one analysis. Determination of multiple sample parameters with one analysis. Automatic closing and opening of crucible covers during analysis. Automatic switching of atmospheres (oxygen or nitrogen) during analysis.  

Single Beam Wavelength range 190-1000nm. 4nm Bandpass

The Thermo Scientific FH Family of Digital Peristaltic Pump systems offer superior performance with the precision and ease of use that’s long been the hallmark of the Thermo Scientific fluid handling Product range. Designed to handle a wide range of fluids from the Highest purity to extremely caustic solutions. FH Series pumps are used in a broad range of critical applications – from agricultural to chemical processing and from beverage dispensing to semiconductor polishing.

The versatile and flexible MASTER GC delivers unsurpassed analytical capabilities meeting today's laboratories productivity requirements. The GC was uniquely designed to perform conventional and fast gas chromatographic analyses fulfilling the demands of routine and research analyses. The primary goal of Fast GC is to maintain proper resolving power in shorter analysis run times by using adequate instrumentation and analytical columns in combination with optimized method parameters. The MASTER GC features a maximum heating rate of up to 140 °C/min and a typical cooling time of 4 min. The system can be equipped with an array of inlet systems and a wide selection of detectors, engineered with fast electronics to handle sharp peaks generate in Fast GC; data acquisition rates of up to 300 Hz are performed. MASTER GC integrates leading-edge technology with total system control delivering outstanding reliability, repeatability, and performance. In combination with the MASTER AS Liquid Autosampler, the MASTER GC offers complete automation of all operation steps and a sequential and unattended run of up to 160 samples.

The Thermo Scientific FH Family of Digital Peristaltic Pump systems offer superior performance with the precision and ease of use that’s long been the hallmark of the Thermo Scientific fluid handling Product range. Designed to handle a wide range of fluids from the Highest purity to extremely caustic solutions. FH Series pumps are used in a broad range of critical applications – from agricultural to chemical processing and from beverage dispensing to semiconductor polishing.

a) Low end pH Meter a) pH Meter (both Portable & Lab Top Models). b) Conductivity Meter(both Portable & Lab Top Models). c) DO Meter (Portable Models). d) Density Meter(both Portable & Lab Top Models). e) Refracto Meter(both Portable & Lab Top Models). f) Titrator (KF, Coulemeter, Potentiometeric etc.).

a) Manual Pipettes b) Digital Pipettes c) Multi Channel Pipettes d) Tips

a) Electronic Precision, Analytical Balances. b) UltraMicro, Micro & Semi Micro Balances. c) Mass Comparator. d) Halogen Moisture Analyser. e) Weight Set . f) Labx Software. g) Printers & other accessories. h) SQC.

• Power Supply100 to 240 V AC, or 20 to 30 V DC, 12 VA

The M800 multi-parameter transmitter provides simultaneous monitoring of one, two, or four in-line sensors for measurement of pHORP, optical DO, amperometric oxygen (DO as well as O2 gas), conductivity, resistivity, TOC dissolved ozone, flow, and turbidity, in pure water as well as process applications. ISM features available on all M800 models include Plug and Measure for fast sensor installation and start up, predictive maintenance information, and dynamic sensor lifetime status. Thanks to the iMonitor display, the condition of each sensor is determined at a glance allowing preventive action to be taken before processes are affected.

Thermogravimetry is based on the continues recording of mass variation of a sample specifically related to temperature change. The method can be used to analyse organic, inorganic and synthetic materials. Thermostep of Eltra can determine multiple parameters such as moisture ash gypsum purity etc. on each sample during one analysis. Determination of multiple sample parameters with one analysis. Automatic closing and opening of crucible covers during analysis. Automatic switching of atmospheres (oxygen or nitrogen) during analysis.