• Temperature-40°C to +125°C ( Short Term 140°C)

Light / medium heavy flexible hose, made of  premium Heat Resistant  TPU Materials with copper coated spring steel wire reinforcement. Although entire IDs between 25mm to 508mm are available, under this special grade, the wall thicknesses, in regular production are  0.4/0.6/1.2  and  1.5mm  only.   Material dryers , hot air supply,   material handling  & suction hose for abrasive particles & any other application under PU Light / Heavy / Extra heavy duty where temp. requirement is high.  

• ColourTransparent with Grey Spirals.
• Temperature-10°C to +80°C

• Temperature-40°C to +90°C (Short term 125°C)

Hose wall made of  ether  grade (microbes and hydrolysis resistant) abrasion resistant Polyurethane  (wall thickness between the spiral 0.4mm)  with copper coated spring steel wire reinforcement. A very light and extremely flexible hose with good tensile strength and ultimate elongation. shore A ~85. Free of softeners, halogen and cadmium free and produced in line with  FDA  regulations. Hoses up to 90mm ID comes in roll form, whereas hoses from 100mm ID and above comes in compressed form for the sake of cost effective transportation. As the same is compressed after production, the hose will not retain the original measurement afterwards. Hence you may measure the same after fully elongating under pressure or go on counting rings as  1 Meter =41/42 rings  for measurement purpose or use. The advantage of hose in compressed form is that the same can be ideally used between moving parts like CNC router etc as the hose behaves like a spring during onward and backward movements.

• Temp-40°C to +115°C (short term 150°C)
• ColourGrey / Balck

• Standard Length10 Meters
• Compressible10: 1 & 6: 1
• Wall Thicknessapp.0.35 to 0.65 mm

• Temp-40°C to +115°C (short term 150°C)
• ColourGrey / Balck

• Standard Length10 Meters
• Compressible10: 1 & 6: 1
• Wall Thicknessapp.0.35 to 0.65 mm

• Temperature-40°C to +90°C (Short term 125°C)

Hose wall made of  ether  grade (microbes and hydrolysis resistant) abrasion resistant Polyurethane  (wall thickness between the spiral 0.4mm)  with copper coated spring steel wire reinforcement. A very light and extremely flexible hose with good tensile strength and ultimate elongation. shore A ~85. Free of softeners, halogen and cadmium free and produced in line with  FDA  regulations. Hoses up to 90mm ID comes in roll form, whereas hoses from 100mm ID and above comes in compressed form for the sake of cost effective transportation. As the same is compressed after production, the hose will not retain the original measurement afterwards. Hence you may measure the same after fully elongating under pressure or go on counting rings as  1 Meter =41/42 rings  for measurement purpose or use. The advantage of hose in compressed form is that the same can be ideally used between moving parts like CNC router etc as the hose behaves like a spring during onward and backward movements.

• Temperature-40°C to +125°C ( Short Term 140°C)

Light / medium heavy flexible hose, made of  premium Heat Resistant  TPU Materials with copper coated spring steel wire reinforcement. Although entire IDs between 25mm to 508mm are available, under this special grade, the wall thicknesses, in regular production are  0.4/0.6/1.2  and  1.5mm  only.   Material dryers , hot air supply,   material handling  & suction hose for abrasive particles & any other application under PU Light / Heavy / Extra heavy duty where temp. requirement is high.  

• ColourTransparent with Grey Spirals.
• Temperature-10°C to +80°C