Our Products
Leading Manufacturer, Supplier & Retailer of FARGO HDP5000 Card Printer.
Catalogue
FARGO® HDP5000
| Print Method: | HDP® Dye-Sublimation / Resin Thermal Transfer | |
| Resolution: | 300 dpi (11.8 dots/mm) | |
| Colors: | Up to 16.7 million / 256 shades per pixel | |
| Print Ribbon Options: | Full-color, YMC*, 750 prints Full-color with resin black, YMCK*, 500 prints Full-color with two resin black panels, YMCKK*, 500 prints, Full-color with resin black and heat seal panel, YMCKH*, 500 prints Full-color with resin black and fluorescing panels, YMCFK*, 500 prints |
• Full-color with resin black and inhibit panel, YMCKI*, 500 prints • Full-color with two resin black and inhibit panels, YMCKIKI*, 400 prints • Full-color with resin black, inhibit panel and heat seal panel, YMCIKH*, 450 prints • Resin black, K*, 3000 prints |
| HDP Film Options: | • Clear (1,500 prints) • Standard Holographic (500 prints) • Contact HID regarding Custom Holographic Film options | |
| Overlaminate Options: | • Thermal Transfer Overlaminate, .25 mil thick, 500 prints • PolyGuard® Overlaminate, 1.0 mil and .6 mil thick, 250 prints (PolyGuard available in a CR-80 patch size) |
|
| Print Speed:** | Batch Mode: Up to 24 seconds per card / 150 cards per hour (YMC with transfer)* Up to 29 seconds per card / 124 cards per hour (YMCK with transfer)* Up to 40 seconds per card / 90 cards per hour (YMCKK with transfer)* Up to 35 seconds per card / 102 cards per hour (YMCK with transfer and dual-sided, simultaneous lamination)* Up to 48 seconds per card / 75 cards per hour (YMCKK with transfer and dual-sided, simultaneous lamination)* |
|
| Accepted Standard Card Sizes: | CR-80 (3.375”L x 2.125”W / 85.6mmL x 54mmW) | |
| Print Area: | Over-the-edge on CR-80 cards | |
| Accepted Card Thickness: | • Print only: .030” (30 mil) to .050” (50 mil) / .762mm to 1.27mm • Print/Lamination: .030” (30 mil) to .050” (50 mil) / .762mm to 1.27mm |
|
| Accepted Card Types: | ABS, Laminated PVC, PET, PETG, proximity, smart and mag stripe cards Note: ABS and PVC cards are not recommended for use in the HDP5000 Lamination Module.*** |
|
| Input Card Cartridge Capacity: | 100 cards (.030” / .762mm) | |
| Output Hopper Card Capacity: | 200 cards (.030” / .762mm) | |
| Card Cleaning: | Replaceable cleaning roller (included with each print ribbon) | |
| Display: | Graphical OLED | |
| Software Drivers: | Windows® 7 / 10 / 11 / Server 2012 / Server 2016 / Server 2019 / Server 2022 | |
| Single Wire USB 2.0 Encoding Options | • ISO Magnetic Stripe Encoding, dual high- and low-coercivity, Tracks 1, 2 and 3 • Contactless Smart Card Encoder (HID iCLASS® and MIFARE) • ISO 7816 Contact Smart Card Encoder • Prox Card Reader (HID read-only) |
|
| Supported Access Control Credential Programming |
iCLASS® Standard/SE/SR/Seos, MIFARE Classic®, MIFARE DESFire® EV1, HID Prox (Also see the FARGO HDP6600 Card Encoding Modules Datasheet for additional information) | |
| Interface: | USB 2.0 (high speed) and Ethernet with internal print server | |
| Operating Temperature: | 65° to 90° F / 18° to 32° C | |
| Humidity: | 20 - 80% non-condensing | |
| Dimensions: | HDP5000: 11.50”H x 12.25”W x 9.25”D / 292mmH x 313mmW x 235mmD HDP5000 + Dual-Sided Module: 11.50”H x 17.50”W x 9.25”D / 292mmH x 445mmW x 235mmD HDP5000 + Single-Sided Lam Module: 12.75”H x 25”W x 9.25”D / 324mmH x 635mmW x 235mmD HDP5000 + Dual-Sided Module + Dual-Sided Lam Module: 12.75”H x 30”W x 9.25”D / 324mmH x 762mmW x 235mmD Lam Module: 12.75”H x 12.25”W x 9.25”D / 324mmH x 313mmW x 235mmD |
|
| Weight: | • HDP5000: 16 lbs. / 7.3 kg, HDP5000 + Dual-Sided Module: 22 lbs. / 10 kg, HDP5000 + Single-Sided Lam Module: 28 lbs. / 12.7 kg, • HDP5000 + Dual-Sided Module + Dual-Sided Lam Module: 36 lbs. / 16.4 kg | |
| Certifications: | UL, CE, IC, FCC Class-A, CCC, BSMI, KC, MIC | |
| Supply Voltage: | 100-240 VAC, 3.3A | |
| Supply Frequency: | 50 Hz / 60 Hz | |
| Warranty: | Printer - Three years**** including one year of free printer loaner support with option to purchase a second year of printer loaner support (U.S. only) Printhead – Lifetime****; unlimited card passes |
|
| FARGO Secure Materials: | FARGO Card Printer/Encoders require highly specialized media to function properly. To maximize printed card quality and durability, printhead life and printer/encoder reliability, use only HID Secure Materials. HID warranties are void, where not prohibited by law, when non-HID Secure Materials are used. | |
| Options: | • Dual card input hopper module • Card lamination module – single-sided or dual-sided (simultaneous)*** • Magnetic stripe encoding • 200-card input hopper • Smart card encoding (contact/contactless) • Dual-sided printing • Door and cartridge locks • Printer cleaning kit • Secure proprietary consumables system • Custom secure holographic HDP Film and overlaminate |
|
| Software: | FARGO Workbench™ diagnostic utility with Color Assist spot-color matching | |
Mr. Ganesh (Pixelcomposer Pvt Ltd)
No.19, Ground Floor, 1st Cross, P&T Colony, Bangalore, Karnataka - 560032, India
https://www.pixelcomposer.co.in
Share us via
