Plastic fabricated

Andheri West, Mumbai, Maharashtra

We design fabricate, install and commission at site, Wet Scrubber made of PP FRP, PVC FRP in various diameters and heightsdepending on the volume of polluted gases. It is highly resistant to corrosion and high temperatures up to 100degC.It is packed with tower packing made out of virgin plastics which increases the life of the tower packing and Scrubber. Applications It is very useful in Neutralizing Acidic fumes of SO2, SO3, Ammonia, HCL, HNO3 and NOx among many more which are generated during chemical reaction in the vessels.Specially designed scrubbers are available for Neutralizing Toxic gases generated from Laboratory fume hoods. Laboratory scrubbers can be installed on existing fume hoods.

A fume hood is a ventilation equipment that is designed to pull toxic acid fumes and expel outside. It is easy to install and can be customized as per client requirement. Types of Fume Hood: 1. PP Fume Hood 2. Wooden + PP Fume Hood 3. MS Powder Coated Fume Hood Features: 1. Epoxy powder coated and thoroughly tested for its reliability 2. Vertical rising counter- balanced sash made of toughened float glass for impact resistance and smooth sash operation. 3. Highly chemical resistant laminated inner work walls. Laminar flow fume hood protect the working environment form dust and other airborne contaminants by maintaining a constant, unidirectional flow of HEPA-filtered air over the work area. 4. Gas connection valves and nozzles are provided as per requirement

PP/RIGID PVC/ FRP EXHAUST Ducting& Canopy Hoods with Damper 1. PPFRP/RIGID PVC/FRP Exhaust Ducting and Canopy Hoods with Damper. 2. FRP ducting is fabricated out of 3mm and 5mm thick PP, PVC sheet as per requirements externally coated with FRP for good mechanical strength and to make it long lasting. 3. These are resistant to acids, alkalis and other corrosive gases and temperature resistance up to 110deg. Features: Corrosion ResistanceLong LastingLeak Proof

Indirect Driven Blower is coupled with a shaft and pulley driven via V-belt, ensuring that the motor does not come in contact with the corrosive fumes. By changing the size of the pulley, you can adjust the RPM of the impeller to increase/decrease the CFM and W. G. pressure of the fan. 2. Impellers which are used in blowers are one-piece injection molded which are dynamically and statically balanced in various diameters: 10, 12.5, 15, 17, 21 and 24.

Injection Molded One Piece , With High Mechanical Strength.Resistant To Acids, Alkalies & Corrosive Chemicals.Temperature Resistant Up To 140C.Very Useful For Drying & Crystallization.Smooth Surface , Easy To Clean & Wash With Water.No Contamination, Materials Do Not Stick , So No Loss Of Materials.Economical And Much More Superior Then Aluminum And FRP Trays.No Effect Of Atmospheric Corrosive Gases & Liquid Lying On The Floor Inside The FactoryWidely Used By Fine Chemicals , Pharmaceutical , API Manufacturers, Drugs Industries, Dyes, Intermediates Etc. Size: 32 Length X 16 Width X 1.25 Height With 5mm Wall Thickness. Special Sizes Can Be Made For Bulk Requirement

It Is One Piece Molded Out Of Polypropylene And Is The Most Efficient Types Of Ring Packing For Large Scale Superior Characteristic Derive From The Slotted Wall & The Internal Projecting Tongues, Which Give This Higher Capacity Or Lower Pressure Drop Also Higher Contact Efficiency Arising From The Better Disposition And Better Wetting Of The Surface Migration Of Liquid Forward Of The Vessel Wall Is Also Reduced.

It is one piece molded out of polypropylene and is the most efficient types of ring packing for large scale superior characteristic derive from the slotted wall & the internal projecting tongues, which give this higher capacity or lower pressure drop also higher contact efficiency arising from the better disposition and better wetting of the surface Migration of liquid forward of the vessel wall is also reduced. The free gas space is much this same as for plane rings.

It Is One Piece Molded Out Of Polypropylene And Designed With Increased Open Area And Reduced Pressure Drop Which Provides High Surface Area And Strength. Available In S-Type, M- Type And L-Type Sizes.

Our Scrapper /Spatulas & Scoop Are Manufacture From Virgin Polypropylene & Having Good Mechanical Strength & Unbreakable Handle.It Is Widely Used In Chemical , Pharmaceutical, Fine Chemicals , API, Drug Intermediates, Dyes, Etc.Highly DurableEconomical In CostIt Is Resistant To Corrosive Material.

We Offer High Quality PP Grid For Vacuum Belt Filters. These Grids Are One Piece Molded Using Strong And Rigid Polypropylene Materials. It Is Widely Used In Oil, Chemicals, Pharmaceuticals, Food & Dyes Industries As Support Below The Belt In Vacuum Belt Filter And Rotary Drum Filter. Features: Resistant To CorrosionAcid & Heat Resistant

PP Impellers Are Molded With PP Ring Welded On Blade And PP Cap Fitted On Hub To Prevent Corrosive Fumes Coming In Contact With Metallic Hub. It Has Good Mechanical Strength And Designed For Optimum Performance And Efficiency. Hub Bor Is Made As Per Customers Requirement. These Are Available In Different Sizes For Different Flow Rates And Pressure Available In Different Sizes: 8, 10, 12.5, 15, 17, 21, 24. Made From Virgin PPHighly Durable

We Are FRP Garden Bench Patti Manufacturers In India And Deliver Pan India. These Pattis Are Made On A Fully Automatic Machine By The Process Of Pultrusion And Is Widely Used By Outdoor And Indoor Bench Manufacturers. It Has A Wooden Finish On It Which Resembles Wooden Sections. The FRP Bench Patti Is UV Stabilised So That It Does Not Fade In Sun Light.

Specifications: 1. FRP Box Pipe Size 50 X 50 X 4mm 2. FRP Round Box Pipe Size:ID 19mm 3. FRP Round Box Pipe Size:OD 25mm 4. Thickness 3mm Features: Anti CorrosiveAnti TheftWeather ProofAvailable In All ColorsUV StabilizeLow Maintenance

FRP Moulded Gratings are widely used in highly corrosive environments and areas exposed to acids, alkalis, chemicals, oils, etc. FRP moulded gratings are used in structures, replacing wood and steel almost completely. We provide single piece moulded FRP Gratings in different sizes which can be customized as per customer requirement. These can be easily installed and the load carrying capacity is evenly distributed over gratings. Gratings are also available in Anti-skid surface finishing and are available in a wide range of colours and panel sizes. Moulded Gratings are also available in Fire Retardant Grade. Types of Gratings: 1. Open gratings 2. Covered on one side Technical Specifications: 1. Mesh Size: Sq.38mm X Sq.38mm 2. Rib Thickness: 5 to 7mm 3. Available thickness: 25/30/38mm 4. Glass content is 35% Applications: Walkway for Solar Rooftop PanelsWalkway in Chemical IndustriesTrench Cover in Chemical & Pharmaceutical industries.Platforms & Walkways in Water Treatment PlantsFoot Bridge, Step Threads, and Staircase.

We provide FRP pultruded grating which is assembled from I section and Tie rod that can be customized as per client requirement. These can be easily installed and have a load carrying capacity that is evenly distributed. Technical Specifications : 1. Glass content is 70% 2. I section:25mm & 38mm 3. Tie Rod Size: 10 to 12mm diameter 4. Spacing between I section :40mm 5. Spacing between tie rod : 150mm Applications : 1. *Mesh size, I section and rod sizes are fixed, Grating can be cut in different sizes. 2. FRP Garden Bench Slats & Bench 3. The FRP Garden Bench Slats (Patti) is manufactured by the process of pultrusion on a fully automatic machine. 4. It has a wooden finish on it which resembles wooden sections. The FRP garden bench slats (patti) is UV stabilized so that it does not fade in sun light.