Our Products
PU Timing Belts has high performance transmission. This PU Belts has high intensive and low extension adoptive modules. It contains polyurethane on both side upper and lower surfaces. These belts are available with Open-End and Endless (Joined) kind.
RANGE | XL | L | H | T2.5 | T5 | T10 | T20 | AT5 | AT10 | AT20 |
PITCH | 5.08 MM | 9.525 MM | 12.70 MM | 2.5 MM | 5.0 MM | 10.0 MM | 20.0 MM | 5.0 MM | 10.0 MM | 20.0 MM |
Poly v-belt allows drive design to meet requirements of power grip and space. This belt also allows high drive efficiency on small pulleys at high speed and low vibration. It is also known as Rubber Ribbed Belts.
pj | pk | pl | pm |
2.34mm | 3.56mm | 4.7mm | 9.4mm |
Polyflex Belts has High Modulus Polyurethane compound which resists ozone and weather condition, having strength of smooth drives with high speed and minimum vibration. It is widely applicable at computer peripherals, machine tools, medical equipments, blowers, drilling machines and other small appliances.
3m | 5m | 7m | 11m |
3x2 | 5x3 | 7x5 | 11x7 |
HTD Belts is high torque drive belts of curvilinear tooth form. It is more compact and more economical belt from Industrial synchronous belts made of international quality standard. STD Belts is referred to SuperTorque drive belts. These special curvilinear tooth design belts are available in wide range and size.
RANGE | 2M | 3M | 5M | 8M | 14M | S2M | S3M | S4.5M | S5M | S8M | S14M |
PITCH | 2.0 MM | 3.0 MM | 5.0 MM | 8.0 MM | 14.0MM | 2.0MM | 3.0MM | 4.5MM | 5.0MM | 8.0MM | 14.0MM |
Vbelts are widely used on high speed and high torque drives on light, heavy industrial and automotive machines. The Vee belts that are manufactured are incorporated with the latest art of technology and compiling all the IS : 2494 standards. These belts have exceptional length stability, have a great shock absorbing capacity and drive uniformity. The range of V Belts has different sections namely A, B, C, D and E.belts are widely used on high speed and high torque drives on light, heavy industrial and automotive machines. The Vee belts that are manufactured are incorporated with the latest art of technology and compiling all the IS : 2494 standards. These belts have exceptional length stability, have a great shock absorbing capacity and drive uniformity. The range of V Belts has different sections namely A, B, C, D and E.belts are widely used on high speed and high torque drives on light, heavy industrial and automotive machines. The Vee belts that are manufactured are incorporated with the latest art of technology and compiling all the IS : 2494 standards. These belts have exceptional length stability, have a great shock absorbing capacity and drive uniformity. The range of V Belts has different sections namely A, B, C, D and E.belts are widely used on high speed and high torque drives on light, heavy industrial and automotive machines. The Vee belts that are manufactured are incorporated with the latest art of technology and compiling all the IS : 2494 standards. These belts have exceptional length stability, have a great shock absorbing capacity and drive uniformity. The range of V Belts has different sections namely A, B, C, D and E.
Section | Nominal Top Width (mm) |
Nominal Thickness (mm) |
Angle (Deg.) |
Size Range (inch) |
Pitch Length (mm) |
A | 13.0 | 8.0 | 40 | 16* - 225* | 36 |
B | 17.0 | 11.0 | 40 | 19* - 598* | 43 |
C | 22.0 | 14.0 | 40 | 36* - 598* | 56 |
D | 32.0 | 19.0 | 40 | 95* - 598* | 79 |
E | 38.0 | 23.0 | 40 | 100* - 598* | 92 |
Wedge Belts have been the result of continuous thrust by the manufacturers and the users on higher power transmissions with reduction in space requirements. Wedge belts can transmit high power to extent of 1.5 to 2 times the classical belts with same top width this has been achieved by the dimensional changes, part from better cord constructions used and the optimum placing of the cord line which provides the best support to the cord while in motion. For efficient performance of wedge drives it is essential that the proper tension.
Features :
Less deformation of the belt cross section when in contact with the pulleys ensures better contact between the beltflanks and the pulley grooves.
Application :
Wedge belts are used primarily on all the new drives because of the space savings achieved by using these belts. Wedge belts find its extensive use in all industrial applications from light duty drives to heavily loaded drives.
Standards and Dimensions :
Polydrive manufactures the entire range of wedge belts. The nominal length designation for wedge belts is the pitch length in mm.
Dimension | Angle | Pitch Width | Belt Length Factor | Standard | Recommended Min pulley diameter |
Range | |||
A mm |
B mm |
Deg. | Wp mm |
Li to Lp mm |
Li to La mm |
||||
SPZ | 10 | 8 | 40 | 8.5 | 37 | 50 | IS 14261 | 67 | 710-4953 |
SPA | 13 | 10 | 40 | 11.0 | 18 | 63 | IS 14261 | 100 | 1320-9144 |
SPB | 17 | 14 | 40 | 14.0 | 28 | 88 | IS 14261 | 160 | 1320-13000 |
SPC | 22 | 18 | 40 | 19.0 | 30 | 113 | IS 14261 | 224 | 2550-12500 |
Are built for maximum tension control, drive uniformity & long life, with minimum heat build-up & stretching on low horse power electric motors & gasoline engines. They are designed for high speed drive & short center distance.
Features :
Cogged belts are suitable for all industrial applications, particularly where small or sub-minimal sheave diameters are required.
We are one of the leading Cogged Belt Manufacturers & Supplier in Mumbai, India. Our main aim is to offer products of best quality so that customers can achieve optimum production, efficiency, minimum operating cost.
Cogged Belt Features :
Belt Type | Top Width A (mm) |
Height B (mm) |
Angel q (°) |
Belt Outside Length in inches |
ZX/X10 | 10.0 | 6.0 | 40 | 20-157 |
AX/X13 | 13.0 | 8.0 | 40 | 20-157 |
BX/X17 | 17.0 | 11.0 | 40 | 22-157 |
CX/X22 | 22.0 | 13.5 | 40 | 30-157 |
Belt Type | Top Width A (mm) |
Height B (mm) |
Angel q (°) |
Belt Ptch Length in mm |
XPZ | 9.7 | 6.0 | 40 | 600 to 1900 |
XPA | 12.7 | 10.0 | 40 | 600 to 4000 |
XPB | 16.3 | 13.0 | 40 | 600 to 4000 |
XPC | 22.0 | 17.5 | 40 | 1000 to 4000 |
X20A | 21.5 | 13.0 | 38 | 650 to 4200 |
HAX | 13 | 7 | 40 | 650 to 4200 |
HBX | 17 | 9 | 40 | 650 to 4200 |
Effective Length in inches | ||||
3VX | 9.7 | 8.0 | 40 | 24 to 157 |
5VX | 15.8 | 13.5 | 40 | 31.5 to 157 |
Transmission Rubber Beltings are suitable to the most demanding conditions of various industries such as Textiles, Paper, Pharmaceuticals, Food Processing, Engineering and othe Allied Industries.
Ply Construction | Nominal Thickness of Belt (mm) |
3 | 4.0 |
4 | 5.1 |
5 | 6.5 |
6 | 7.5 |
8 | 10.5 |
10 | 13. |
Plies | : | 3 plies to 12 plies |
Length | : | 100 metres roll duly packed in polythene and gunny bags |
Colours | : | Grey, Green, Orange, Red, Creme |
Side Paints | : | Green, Red, Blue, Black, Silver |
The full depth of a V-section T-Link Belt is made up from 3 overlapping sections.
The belt is joined or broken by simply rotating the T-headed pins until they line up with the slots cut in a each link.
Although the pins go right through each link there is always clearance for them in the bottom of the V pulley
Commonly known as "Link Belts", which is a type of V-belt (it cannot be used on flat-belt drives), is widely used in industrial and marine applications. Although more expensive than ordinary V-belts it does have some important advantage.
Advantages :
Z and Z/M-section | 10mm (3/8”) | ||
A-section | 13mm (1/2”) | ||
B-section | 17mm (5/8”) |