Power Heaters

Waluj, AURANGABAD, Maharashtra

Alkaline heaters are made of Chrome Nickel sheathed heating element brazed to C.I. junction box for mounting on side of the vessel, easy to remove and clean.

• Heaters manufactured by using titanium pipe
• Mounting one side of the vessel
• Easy to remove and clean
• Available in various wattages and different sizes
• Application -
• Also used in commercial tanks for heating of the acids.
• Used for heating alkaline cleaning solution detergents and other alkaline solutions normally corrosive to mild steel (up to 90oC).

Porcelain Heaters, offer a large heated area to the Gases, liquids or semi-solids to be heated when inserted into a Thermo well. A Feature of this type of heater is that it may be removed for repair or replacement without draining the contents of the vessel. The sheathing Material may be M.S, S.S or Titanium or with clamp late, depending on the application.

• We are engaged in manufacturing and supplying of a very wide range in porcelain heaters
• These heaters can be made in single, two and three phases
• Efficient heaters for high heating purpose
• Heaters available in various sizes and wattages

1. Used in Various oil plants
2. Also used in the plating industries

Ceramic Band Heaters design consist of a helically wound resistance coil made from 80/20 michrome wire, evenly stretched and precisely strung through a specially designed ceramic insulating bricks forming a flexible heating mat. The ceramic heating mat along with ceramic fiber insulation is placed on a stainless steel housing made with serrated edges providing maximum flexibility for easy installation.

• Ceramic Band Heaters manufactured in the Medium to High temperature range.
• Heaters built in Ceramic Fiber insulation and SS Sheet.
• Perforated heater with fins provide for faster cooling
• The terminals and the connections can be provided as per requirement
• Available with various diameter, length, wattage, voltage and configuration

1. Mainly used in Plastic industries, Packaging and Engineering industries and in the Extruders
2. Blow molding Barrels
3. Rubber Machinery

Manifold Heaters are available in Round & Square cross sections and various sizes and shapes as per customer's spcifications.The outer sheath is made of Inconel.

• We manufacture Manifold heaters or Tubular heaters or Flexible heaters which are having high and good thermal conductivity.
• Heater manufactured with compression method, shows high heating capacity and also high insulation resistance.
• Precise forming of heaters required for it to seat properly into the milled slot in the mold.
• Available in 6.5mm, 6.7mm, 7mm and 8mm OD & the length as per requirement of our valuable customer.
• They can be shaped into any pattern depending on applications
• Application -
• Mainly used in the Hot Runner Molds.

Providing the best range of Cast Heaters such as Cast Bronze Heaters Aluminum Casted Heater with effective and timely delivery.

• Casting heaters are available in aluminum and brass in a very wide range
• Specially designed for packaging industries
• High thermal conductivity
• Accurate temperature control
• Contamination Resistance

1. Used in injections and blow molding , extruders, yarn and filament industries
2. Also used in food processing and in laboratory equipments, tier making etc.

An infrared heater or heat lamp is a body with a higher temperature which transfers energy to a body with a lower temperature through electromagnetic radiation. Depending on the temperature of the emitting body, the wavelength of the infrared radiation ranges from 780 nm to 1 mm. The relationship between temperature and wavelength is expressed by Wien's displacement law. No contact or medium between the two bodies is needed for the energy transfer. Infrared heaters can be operated in vacuum or atmosphere.

• Infrared Heaters available in glass and ceramic type
• These heaters have high radiant efficiency up to 80%
• Very rapid heat up and cool down
• Glaze-coated ceramic body with no surface flaking or oxidation as on metal
• Sheath elements
• Available in various sizes and wattages
• Available with built-in type K thermocouple.

1. Laminating Industries
2. Drying textiles
3. Plastic Forming Industries
4. Thermo Forming Industries