Other Products / Services #4240582

Titanium nitride coated tool bit used for facing. Tool bit has cutting edges on both ends, so it doubles tool bit life.High speed production tool.Titanium Nitride coated tool bit can be reversed and used. Doubles tool bit life.

Use : Oil Coolers, Radiators and other apparatus with small diameter tubes.Advantages : Captive mandrel - eliminates nut on mandrel tip which prevents scratching of tube I.D.Increased feed angle makes it the fastest operating tool on the market, ideal for high production environments

14 Square Drive Spindle to suit all Standard Sockets and Screw Driver Bits.Bi-Directional operation with consistent repeat accuracy.Concealed adjustment mechanism to prevent accidental re-setting during use.

Standard, Deep and Thinwall SocketsUp to 3.12" square drive Impact Sockets through to 235MM (9.18") across the flats# 5 spline drive to 80mm (4") across the flatsWide variety of Accessories

PR-68 tube cutters are ideal for tube cutting thick walled boiler tube of 2 O.D. and higher.The Internal Tube Cutters PR-68 is driven via the square in a clockwise direction using either an electric, pneumatic or hydraulic driving machine.PR-68 type tube cutters are available in standard reach of 4 (101.6mm). Additional reaches in increments of 4 are available up to 16 (406.4mm).

Used for removing soft scales in ferrous tubes (carbon steel, stainless steel) and non-ferrous tubes (copper, brass, plastic, etc.) and for final 'finishing' of tubes.

Electric Tube Cleaners are environment friendly, compact and easily maneuverable units used to clean straight and curved tubes in heat exchangers, condensers, boilers and other tubular apparatus. Water consumption can be regulated as needed. Easy interchangeability of various shafts and accessories for maximum versatility. They work by attaching a cleaning tool (to be determined on type of deposit to be cleaned) to a flexible shaft. The Electric Tube Cleaner provides rotary motion to the flexible shaft which rotates the cleaning tool inside the tube. If needed water passes through the flexible shaft to aid in flushing out of the deposits. All Electric Tube Cleaners are supplied with forward direction foot switch. Dual direction foot switches are available on request.

Model-ATC-100 Portable Pneumatic Tube Cleaning Machine includes FRL unit, adjustable speedtorque control, and air foot pedal. The ATC-100 uses a cleaning tool mounted on the tip of a flexible shaft, which is available in different lengths and diameters to fit the size of the tube to be cleaned. For wet applications, as the shaft rotates inside its watertight nylon casing, the unit feeds water through the casing to the cleaning tool. A foot switch controls shaft rotation and water flow. While the operator feeds the rotating shaft assembly through the tube, the waterflow softens the deposits before cleaning and flushes them out during cleaning.

In most cases hard Tube Scrubbers are recommended for removing light to medium deposits in condensers. They work by being 'Shot Thru' the tubes with a high pressure air gun.

A specially designed manual tube pulling instrument, requires less effort, light in weight, easily portable, no skilled worker is required.No power needed: Manual insertion and removal of tube puller with a hand wrench. Ideal for field service applications.Simple Design : Only two major parts reduce inventory.Ease of use : Hex at back of spear allows tightening without disassembly of thrust mechanism.

A specially designed manual tube pulling instrument, requires less effort, light in weight, easily portable, no skilled worker is required. Features of Manual Tube PullerNo power needed: Manual insertion and removal of tube puller with a hand wrench. Ideal for field service applications.Simple Design : Only two major parts reduce inventory.Ease of use : Hex at back of spear allows tightening without disassembly of thrust mechanism.Range of Sizes : A wide range of sizes allows use on popular tube size.Clarity of markings: Both spear and thrust collar are clearly marked for fast relating tool to job

Fully Solid State Design - no moving parts - no wear and tear of parts - no noise - consequently long life.Uses one main circuit board for easy maintenance.Uses the latest micro-controller chip for control functions.Accurately calibrated digital torque settings with a resolution of 1 watt makes torque settings accurate and can be easily reproduced for identical results.Soft start has been provided for all drives. This feature reduces starting currents in the drive. As a result, life of carbon brushes and drive increases.Connected drive is automatically recognised and indicated by means of LED on the torque controller.Torque setting arranged in four different ranges to suit four different drives. Appropriate wattage range is automatically selected for the connected drive, hence drives can not be abused or overused.Actual drive wattage (torque) is displayed. Set wattage (torque), drive current and line voltage can be seen by press of a button.

Buffing Tools are used for final polishing or removal of light and soft deposits from ferrous and non-ferrous tubes that have been previously cleaned. Used in straight or very large radius tubes in a clockwise direction only.

Pneumatic Torque wrenches are the preferred torquing method to achieve productivity with less man-power. Powermaster Pneumatic torque wrenches offer the reliable and dependable solution for the torquing and un-torquing of heavy duty bolts and nuts at various industries where speed, power, accuracy and safety are required. Maximum operating pressure is 90 psi (6 bar).

e took up the challenge of manufacturing India's first Steam Boiler and successfully designed and manufactured a steam boiler from scratch. Later, while expanding tubes in boilers, he realized that Tube Expanders were not easily available in India.Used to plug the tube.

The FM-1625 is a light weight and compact machine for facing, bevelling and weld preparation on all materials including stainless steel, duplex, inconel and others. One operator performs weld preparations safely, accurately and quickly vs. the slow and cumbersome grinding operation. Easy to handle and quick to setup. Used in shutdown environments on condensers and heat exchangers.

The FM-1625 is a light weight and compact machine for facing, bevelling and weld preparation on all materials including stainless steel, duplex, inconel and others. One operator performs weld preparations safely, accurately and quickly vs. the slow and cumbersome grinding operation. Easy to handle and quick to setup. Used in shutdown environments on condensers and heat exchangers.

When ordering flexible shafts and accessories, each item should be ordered for specific tubepipe size or size range. Shafts have color coded shaft stops for easy identification. Stainless Steel inner cores ensure our shafts have longest life, flexibility and resistance to corrosion. Since the inner core of the shafts are the heart of the system and take most of the strain, stainless steel inner cores cause our shafts to last longer than the competition.

When ordering flexible shafts and accessories, each item should be ordered for specific tubepipe size or size range. Shafts have color coded shaft stops for easy identification. Stainless Steel inner cores ensure our shafts have longest life, flexibility and resistance to corrosion. Since the inner core of the shafts are the heart of the system and take most of the strain, stainless steel inner cores cause our shafts to last longer than the competition.

Material: Light weight high strength alloy body reduces its weight to half of the equivalent conventional Torque Wrenches.Compact Size: Compact in size with multiple extensions, ensures use at restricted places. Light Weight and Compact Packing makes handling and transportation easy.Torque Indication: Short path actuation of gears provide clear impulse and audible signal on reaching set torque values.Variable Extension: Extension bars can be adjusted to get different extension length as per the operators requirement.Pin Locking: Pin Lock mechanism at Sq. Drive for positive safe locking.Graduation: Single Scale Graduation for clear reading, Standard scale graduation is in Nm but can be supplied in other scales as required on request.Longer Range: 140 Nm to 3000 Nm covered in just four models.Accuracy: Better than 3 with very high repeatability.Calibration: Calibration Traceable to National Standards.Ratcheting Action: Suitable Ratchet Adaptors available to convert to ratchet type Torque Wrench.Packing: Standard packing is in individual sturdy cardboard box. On request also available in metallic case.

Hydraulic Flange Spreaders are used for safety opening pipe flanges. Available in capacities of 5 tonnes and 10 tonnes the versatility of both models enables the user to open flanges up to 92mm thick. Operated with a standard hydraulic hand pump and connecting hose and supplied in a handy steel storage case, Hydraulic Flange Spreaders can be operated individually, or as a pair when opening large diameter flanges. With Hydraulic Flange Spreaders it takes minutes open the toughest flanges without the risks of sparks caused by hammer blows and chisels.

This unit pulls tubes continuously through the gun. Both electric and pneumatic power packs can be used. Power pack allows up to 350 bar working pressure. Features of Continuous Hydraulic Tube PullerHydraulic Tube Pulling gun communicates with powerpack via 9v DC remote control. This ensures safety and eliminates the need of electrical cord between pump and gun that other manufacturers provide.Available with a choice of Electric-TPP System or Pneumatic-PPP System for hazardous, explosive working environments.Microprocessor controls on powerpack and hydraulic tube pulling gun ensure trouble free life.Removes tube without any damage to tube sheet.Low setup time and ease of operation.High power & High speed automatic cycling, for highest speed of tube puller available worldwide.Auto switchover from low pressure high flow to high pressure low flow on load and again back to low pressure high flow when load is released.Automatic slow start feature to minimize risk of breaking tube puller and to conserve consumables.Compact design of Powerpack and Hydraulic Tube Pulling Gun.Interchangeable tube pulling guns with same powerpack. 15 ton gun for light duty high speed work, 30 ton gun for heavy duty tube puller and 45 ton gun for tubes upto 3 O.D.Stainless steel construction body of powerpack for longer corrosion free life.Hydraulic Tube Pulling up to 3 OD tubes continuously, Tube Puller up to 4 O.D. stub.Low maintenance cost and worldwide availability of components of the Stub Puller.Significant saving of time and money over conventional systems.Unit is portable with handle and mounted on four wheels for easy handling.Unit will pull tube continuously through the gun effortlessly, needing only one man for operation

It is quick and simple to remachine damaged flange faced and raised faced ID mount Flange facing machine. This design is based on our FM-4000 which is converted to Flange facer using special attachment.

The PU-AH-1500 air operated pumps are designed and manufactured in collaboration with Maximator GmbH, Germany and meet the highest technical and safety requirements of high pressure equipment.

The PU-AH-1500 air operated pumps are designed and manufactured in collaboration with Maximator GmbH, Germany and meet the highest technical and safety requirements of high pressure equipment.

Drive communicates with the pump via 9v DC remote control. This ensures safety and eliminates the need of electrical cord between pump and drive that other manufacturers provide.Silent during use. In comparison electric and pneumatic tube expansion systems are noisy.Compact, therefore easy to use inside boiler drums.Compatibility - Same powerpack for all the 4 drives to expand 58 o.d to 4 o.d tube.Very High Torque Developed - can expand large diameter, thick wall tubes in thick tube sheets easily.Long life + low maintenance.Boiler erections get completed in record time.Can be use for long working hours because drive is unaffected by heat.Dual drive powerpack is available to connect 2 drives to a single powerpack to cut down tube expansion time cycle by a further 50%.Microprocessor controls on the pump automate the expansion cycle. Trip, pause and reverse times for the drive are adjustable.No need for repeated manual STOPSTART of the drive during the expansion cycle - completely automaticall

Bolt tensioning is now the preferred method of tightening bolts and studs on all critical applications. Bolt tensioners are designed for operation in a wide variety of applications including pipeline flanges, heat exchangers, pressure vessels, compressor covers, boiler feed pumps, windmills and many others. We provide a comprehensive range of bolt tensioners for optimum solutions to bolt tensioning requirements. Our Bolt tensioners and accessories are CE marked in accordance with Pressure Equipment and Machinery Directives, as applicable.

Heavy Duty for toughest applications.Highest torque output to weight ratio in industry.Available Twin Hammer or Pin Clutch Mechanisms for maximum versatility.Minimum Noise and Vibration.Available in 12 , 34, 1 and 1.12 square drives.Uses standard air supply.

He took up the challenge of manufacturing India's first Steam Boiler and successfully designed and manufactured a steam boiler from scratch. Later, while expanding tubes in boilers, he realized that Tube Expanders were not easily available in India.

With the Hydraulic Power-Spreader, HS10K, a hydraulic cylinder replaces the ratchet handle. A standard hand pump powers 1 Power-Spreader, or a pair, with ease. Again, you are supplied with 4535 kg (10, 000 lbs) of force and 76.2 mm (3) of gap; ample for gasket replacement or turning of blinds.

SWF series balancers are now fully enclosed & are provisioned with a body liner to prevent damage to body.He took up the challenge of manufacturing India's first Steam Boiler and successfully designed and manufactured a steam boiler from scratch. Later, while expanding tubes in boilers, he realized that Tube Expanders were not easily available in India.