Power System Control

Noida, Uttar Pradesh

Direct measurement of voltage in High Voltage System is Not possible because of insulation problem of measuring instruments. It is also not possible to use direct voltage for the system protection purpose due to its high value and high insulation problem protective relays. Therefore voltage transformers are used to step-down the high system voltage to low standard value accurately in proportion to their order to retain remarkable position in this industry, we are providing a wide array of 33KV HT VOLTAGE TRANSFORMERS

We are recognized as a successful manufacturers, exporters and traders of Current Transformers CT. It is a static machine used for transforming power from one circuit to another without changing frequency. it is generally used in transmission network which is normally known as power transformer, distribution transformer is used in distribution network and this is lower rating transformer and current transformer & potential transformer, we use for relay and protection purpose in electrical power system and in different instruments in industries are called instrument transformer.

Manufacturing and trading of supreme quality 11kV Current Transformer have helped us achieve a very high level of trust in the market. These are designed with smaller cores and VA capacities than power transformers. This causes metering power transformers to saturate at lower secondary voltage outputs saving sensitive connected metering devices from damaging large voltage spikes found in grid disturbances. They are designed to present a negligible load to the supply being measured and have an accurate voltage ratio and phase relationship to enable accurate secondary connected metering.rnAccuracy Class 0.5, 0.2, 0.2S/5P10/5P15/5P20/PS, 10rnPower Rating 11KVrnCore Type Oil Cooled, Outdoor TypernBrand Power System ControlrnPhase One PhasernRated Voltage 12KVrnMaterial MSrnCT Ratio 200-100/5-5A

We are recognized as a successful manufacturers, exporters and traders of Current Transformers CT. It is a static machine used for transforming power from one circuit to another without changing frequency. it is generally used in transmission network which is normally known as power transformer, distribution transformer is used in distribution network and this is lower rating transformer and current transformer & potential transformer, we use for relay and protection purpose in electrical power system and in different instruments in industries are called instrument transformer.

We are recognized as a successful manufacturers, exporters and traders of Current Transformers CT. It is a static machine used for transforming power from one circuit to another without changing frequency. it is generally used in transmission network which is normally known as power transformer, distribution transformer is used in distribution network and this is lower rating transformer and current transformer & potential transformer, we use for relay and protection purpose in electrical power system and in different instruments in industries are called instrument transformer.

We are the manufacturers of 11KV CT Current Transformer that is known for high performance, rigid construction and longer service life. The panel is user-friendly and easy to operate. This is high in performance, provide accurate results and require less maintenance. Its reliable operating mechanism also ensure safety of the user. Outdoor type oil cooled current transformers are subjected to extreme climatic conditions at customer sites and hence Quality and Reliability have been built into the Product right from the design stage and are followed up through established manufacturing processes, rigorous In-process quality checks and the designs validated by exhaustive type testing and satisfactory field performance.

We are recognized as a successful manufacturers, exporters and traders of Current Transformers CT. It is a static machine used for transforming power from one circuit to another without changing frequency. it is generally used in transmission network which is normally known as power transformer, distribution transformer is used in distribution network and this is lower rating transformer and current transformer & potential transformer, we use for relay and protection purpose in electrical power system and in different instruments in industries are called instrument transformer.

Manufacturing and trading of supreme quality 11KV POTENTIAL TRANSFORMER WITH CONSERVATOR have helped us achieve a very high level of trust in the market. They are designed to present a negligible load to the supply being measured and have an accurate current ratio and phase relationship to enable accurate secondary connected metering. These are constructed by passing a single primary turn (either an insulated cable or an uninsulated bus bar) through a well-insulated toroidal core wrapped with many turns of wire. This affords easy implementation and using the pass-through conductor as a single turn primary.

33KV Cooled Outdoor type Current Transformers are used for electrical measuring instruments and / or electrical protective devices. They are very useful in high power circuits where the current is large. Our range of transformer know for their efficiency and better performance. MEASURING CURRENT TRANSFORMERS These transformers are used in measuring and indicating current, that is to reduce the line current to a value which is suitable for standard measuring instruments, relays etc. PROTECTIVE CURRENT TRANSFORMERS These transformers are used for over current and undercurrent relaying for power circuit protection TYPE : Current Transformers are normally categorized as Ring / Bar type and Wound Primary Application: Electronic, Instrument Type: Current Transformer Phase: Single Operation Condition: Oil Cooled Outdoor Type Usage: Protection, Measurement Winding Form: Single Layer & Tightly Wound Type Frequency : 50Hz Year of Mfg. 2022 Standard: IS 2750/1992, IEC 60044

We are recognized as a successful manufacturers, exporters and traders of Current Transformers CT. It is a static machine used for transforming power from one circuit to another without changing frequency. it is generally used in transmission network which is normally known as power transformer, distribution transformer is used in distribution network and this is lower rating transformer and current transformer & potential transformer, we use for relay and protection purpose in electrical power system and in different instruments in industries are called instrument transformer.

Manufacturing and trading of supreme quality 33KV Current Transformer have helped us achieve a very high level of trust in the market. These are designed with smaller cores and VA capacities than power transformers. This causes metering power transformers to saturate at lower secondary voltage outputs saving sensitive connected metering devices from damaging large voltage spikes found in grid disturbances. They are designed to present a negligible load to the supply being measured and have an accurate voltage ratio and phase relationship to enable accurate secondary connected metering.

System Voltage 33KV Ip Up to 1200A uIs = 5 or 1 A Up to 3 cores Ith up to 36kA Burden : Up to 50VA Accuracy : 0.2/0.2S/0.5/0.5S/1.0 Lightning Impulse Voltage 36/75/170 kVp. Brand : Power System Control Country of Origin : India Category : Current Transformer Group : Instrument Transformer Standard: IS 2705, IEC-60044 Category: Current Transformer

Minimum Order Quantity 1 Unit Accuracy Class 0.5, 0.2, 0.2S/5P10/5P15/5P20/PS, 10 Power Rating 33KV Core Type OUTDOOR TYPE Brand Power System Control Phase One Phase Rated Voltage 36KV Material MS CT Ratio 800-400/1-1A Color As per your requirement 36KV HSV Rated Power (VA) 15VA 20VA 30VA 40VA 50VA Size 1000MMX300MM Rated Burden 15VA 30KV 40KV 50KV 100KV Frequency 50-60Hz Certification ISO

Our team is delicately engaged in offering an assortment of Wound Primary Current Transformer. These products are made-up using the best quality raw material and modern technologies following international norms. We perform rigorous quality check based on various parameters to eliminate defects, if any. This product is highly demanded among customers owing to its reliable performance. We offer this product to our valuable customer at reasonable rates.

Minimum Order Quantity 1 Unit Accuracy Class 0.5, 0.2, 0.2S/5P10/5P15/5P20/PS, 10 Power Rating 33KV Core Type OUTDOOR TYPE Brand Power System Control Phase One Phase Rated Voltage 36KV Material MS CT Ratio 400-200/5-5A Color As per your requirement 36KV HSV Rated Power (VA) 15VA 20VA 30VA 40VA 50VA Rated Burden 15VA 30KV 40KV 50KV 100KV Frequency 50-60Hz Certification ISO Standard IS 2705/1992, IEC 60044-1

We are recognized as a successful manufacturers, exporters and traders of Current Transformers CT. It is a static machine used for transforming power from one circuit to another without changing frequency. it is generally used in transmission network which is normally known as power transformer, distribution transformer is used in distribution network and this is lower rating transformer and current transformer & potential transformer, we use for relay and protection purpose in electrical power system and in different instruments in industries are called instrument transformer.

We are recognized as a successful manufacturers, exporters and traders of Current Transformers CT. It is a static machine used for transforming power from one circuit to another without changing frequency. it is generally used in transmission network which is normally known as power transformer, distribution transformer is used in distribution network and this is lower rating transformer and current transformer & potential transformer, we use for relay and protection purpose in electrical power system and in different instruments in industries are called instrument transformer.

We are recognized as a successful manufacturers, exporters and traders of Current Transformers CT. It is a static machine used for transforming power from one circuit to another without changing frequency. it is generally used in transmission network which is normally known as power transformer, distribution transformer is used in distribution network and this is lower rating transformer and current transformer & potential transformer, we use for relay and protection purpose in electrical power system and in different instruments in industries are called instrument transformer.

Our team is delicately engaged in offering an assortment of Current Transformer. These products are made-up using the best quality raw material and modern technologies following international norms. We perform rigorous quality check based on various parameters to eliminate defects, if any. This product is highly demanded among customers owing to its reliable performance. We offer this product to our valuable customer at reasonable rates. Features: Durable Easy installation Sturdy

Our team is delicately engaged in offering an assortment of Current Transformer. These products are made-up using the best quality raw material and modern technologies following international norms. We perform rigorous quality check based on various parameters to eliminate defects, if any. This product is highly demanded among customers owing to its reliable performance. We offer this product to our valuable customer at reasonable rates. Features: Durable Easy installation Sturdy

Toroidal Current Transformers are used for electrical measuring instruments and / or electrical protective devices. They are very useful in high power circuits where the current is large. Our range of transformer know for their efficiency and better performance. MEASURING CURRENT TRANSFORMERS These transformers are used in measuring and indicating current, that is to reduce the line current to a value which is suitable for standard measuring instruments, relays etc. PROTECTIVE CURRENT TRANSFORMERS These transformers are used for over current and undercurrent relaying for power circuit protection

TYPE : Current Transformers are normally categorized as Ring / Bar type and Wound Primary Ring / Bar type current transformer : A current transformer where primary winding is provided by the user. Wound primary current transformer : A current transformer having a primary winding of more than one full turn wound on core. Current Transformers are wound on Toroidal cores which virtually eliminates error due to leakage flux. Adjusting the number of secondary turns may compensate for some errors.

When the ratio is low it becomes difficult to obtain good results with the single primary turn. For that purpose wound primary CTs are used where both primary and secondary turns is wound on the toroidal core. The ranges available are from 5/5 A to 100/5 A. Also Secondary 1 A can be provided. Optional mounting arrangements are provided as the CT is mounted between two bakelite plates and brass terminals are provided for connections of primary & secondary.

TYPE : Current Transformers are normally categorized as Ring / Bar type and Wound Primary Ring / Bar type current transformer : A current transformer where primary winding is provided by the user. Wound primary current transformer : A current transformer having a primary winding of more than one full turn wound on core. Current Transformers are wound on Toroidal cores which virtually eliminates error due to leakage flux. Adjusting the number of secondary turns may compensate for some errors

These transformers are used for over current and undercurrent relaying for power circuit protection TYPE : Current Transformers are normally categorized as Ring / Bar type and Wound Primary Ring / Bar type current transformer : A current transformer where primary winding is provided by the user. Wound primary current transformer : A current transformer having a primary winding of more than one full turn wound on core. Current Transformers are wound on Toroidal cores which virtually eliminates error due to leakage flux. Adjusting the number of secondary turns may compensate for some errors.

When the ratio is low it becomes difficult to obtain good results with the single primary turn. For that purpose wound primary CTs are used where both primary and secondary turns is wound on the toroidal core. The ranges available are from 5/5 A to 100/5 A. Also Secondary 1 A can be provided. Optional mounting arrangements are provided as the CT is mounted between two bakelite plates and brass terminals are provided for connections of primary & secondary.

A range (6 standard silicon steel core models) tape wrapping current transformer. It is low cost. This model current transformer is also wildly used in Southeast Asia countries. It can be operated with or without foot and plastic cover.

TYPE : Current Transformers are normally categorized as Ring / Bar type and Wound Primary Ring / Bar type current transformer : A current transformer where primary winding is provided by the user. Wound primary current transformer : A current transformer having a primary winding of more than one full turn wound on core. Current Transformers are wound on Toroidal cores which virtually eliminates error due to leakage flux. Adjusting the number of secondary turns may compensate for some errors.

Our 0.66 KV Indoor LT Voltage Transformer is designed to produce flux & convert voltage in secondary winding. Our offered product provides superior voltage regulations & efficiency that finds it wide application in different industries. In addition, it is easy & simple to handle in fact it does not require any manual work at the time of its workings. Moderate temperature rise, No wave form distortion, Rugged mechanical construction are some features of our 0.66 KV Indoor LT Voltage Transformer.

We manufacture and supply Metering Cubicles upto 33KV as per DISCOM standards where metering is done in 3 phase 4 wire system employing 3 current transformers and 3 voltage transformers. Required space is provided for entry of H. T. cable from the bottom through detachable gland plates. Bus bars are epoxy encapsulated. Canopy will be provided for outdoor type metering cubicles.

We manufacture and supply Metering Cubicles upto 33KV as per DISCOM standards where metering is done in 3 phase 4 wire system employing 3 current transformers and 3 voltage transformers. Required space is provided for entry of H. T. cable from the bottom through detachable gland plates. Bus bars are epoxy encapsulated. Canopy will be provided for outdoor type metering cubicles. The Current and Potential Transformers used in these panels are Accuracy tested at National Accredited testing laboratory The panel contains the equipment and components complete with: Bus bar interconnections Control wiring Designation labels Caution notices Electricity Board sealing Pad locking facilities Dimension 11KV

We manufacture and supply Metering Cubicles upto 33KV as per DISCOM standards where metering is done in 3 phase 4 wire system employing 3 current transformers and 3 voltage transformers. Required space is provided for entry of H. T. cable from the bottom through detachable gland plates. Bus bars are epoxy encapsulated. Canopy will be provided for outdoor type metering cubicles. The Current and Potential Transformers used in these panels are Accuracy tested at National Accredited testing laboratory The panel contains the equipment and components complete with: Bus bar interconnections Control wiring Designation labels Caution notices Electricity Board sealing Pad locking facilities Dimension 33KV

We manufacture and supply Metering Cubicles upto 33KV as per DISCOM standards where metering is done in 3 phase 4 wire system employing 3 current transformers and 3 voltage transformers. Required space is provided for entry of H. T. cable from the bottom through detachable gland plates. Bus bars are epoxy encapsulated. Canopy will be provided for outdoor type metering cubicles. The Current and Potential Transformers used in these panels are Accuracy tested at National Accredited testing laboratory The panel contains the equipment and components complete with: Bus bar interconnections Control wiring Designation labels Caution notices Electricity Board sealing Pad locking facilities Dimension 33KV

Model Number: PSCX9/10D Usage: Electronic Phase: Single Coil Structure: TOROIDAL Coil Number: 1 Product name: 20kV 22kV 24kV indoor single phase current transformer Coil material: Copper Insulating material: epoxy resin Insulation mode: Full insulation Max. Output: 600 Grade: 0.2 0.5 3 6P Rated secondary output: 30/80/500/100

Manufacturing and trading of supreme quality Epoxy resin cast Potential Transformers have helped us achieve a very high level of trust in the market. They are designed to present a negligible load to the supply being measured and have an accurate current ratio and phase relationship to enable accurate secondary connected metering. These are constructed by passing a single primary turn (either an insulated cable or an uninsulated bus bar) through a well-insulated toroidal core wrapped with many turns of wire. This affords easy implementation and using the pass-through conductor as a single turn primary.

Make Easy implementation on high voltage bushings Burden:- 100VA Accuracy Class:- 0.5 Direct measurement of voltage in High Voltage System is Not possible because of insulation problem of measuring instruments. It is also not possible to use direct voltage for the system protection purpose due to its high value and high insulation problem protective relays. Therefore voltage transformers are used to step-down the high system voltage to low standard value accurately in proportion to their ratio. In order to retain remarkable position in this industry, we are providing a wide array of 11Kv HT VOLTAGE TRANSFORMERS

Make Easy implementation on high voltage bushings Burden:- 100VA Accuracy Class:- 0.5 Direct measurement of voltage in High Voltage System is Not possible because of insulation problem of measuring instruments. It is also not possible to use direct voltage for the system protection purpose due to its high value and high insulation problem protective relays. Therefore voltage transformers are used to step-down the high system voltage to low standard value accurately in proportion to their ratio. In order to retain remarkable position in this industry, we are providing a wide array of 11Kv HT VOLTAGE TRANSFORMERS

Voltage transformer, good quality conclusion This voltage transformer is vacuum casted with epoxy resin, resistant to pollution and moisture, also suitable for tropical areas. This product has the characteristics of high precision and large capacity, and can be customized according to customer requirements Model Number: PSCX7/10D Usage: Electronic Phase: Single Coil Structure: TOROIDAL Coil Number: 1 Product name: 20kV 22kV 24kV indoor single phase current transformer Coil material: Copper Insulating material: epoxy resin Insulation mode: Full insulation Max. Output: 600 Grade: 0.2 0.5 3 6P

Manufacturing and trading of supreme quality Epoxy resin cast Potential Transformers have helped us achieve a very high level of trust in the market. They are designed to present a negligible load to the supply being measured and have an accurate current ratio and phase relationship to enable accurate secondary connected metering. These are constructed by passing a single primary turn (either an insulated cable or an uninsulated bus bar) through a well-insulated toroidal core wrapped with many turns of wire. This affords easy implementation and using the pass-through conductor as a single turn primary.

Manufacturing and trading of supreme quality Oil Cooled and dry type Three Phase Potential Transformers have helped us achieve a very high level of trust in the market. They are designed to present a negligible load to the supply being measured and have an accurate current ratio and phase relationship to enable accurate secondary connected metering. These are constructed by passing a single primary turn (either an insulated cable or an uninsulated bus bar) through a well-insulated toroidal core wrapped with many turns of wire. This affords easy implementation and using the pass-through conductor as a single turn primary.

Direct measurement of voltage in High Voltage System is Not possible because of insulation problem of measuring instruments. It is also not possible to use direct voltage for the system protection purpose due to its high value and high insulation problem protective relays. Therefore voltage transformers are used to step-down the high system voltage to low standard value accurately in proportion to their ratio. In order to retain remarkable position in this industry, we are providing a wide array of 11Kv HT VOLTAGE TRANSFORMERS

Voltage transformer, good quality conclusion This voltage transformer is vacuum casted with epoxy resin, resistant to pollution and moisture, also suitable for tropical areas. This product has the characteristics of high precision and large capacity, and can be customized according to customer requirements .Model Number: PSCX2/10D Usage: Electronic Phase: Single Coil Structure: TOROIDAL Coil Number: 1 Product name: 20kV 22kV 24kV indoor single phase current transformer Coil material: Copper Insulating material: epoxy resin Insulation mode: Full insulation Max. Output: 600

Model Number: PSCX9/10D Usage: Electronic Phase: Single Coil Structure: TOROIDAL Coil Number: 1 Product name: 20kV 22kV 24kV indoor single phase current transformer Coil material: Copper Insulating material: epoxy resin Insulation mode: Full insulation Max. Output: 600 Grade: 0.2 0.5 3 6P Voltage transformer, good quality conclusion This voltage transformer is vacuum casted with epoxy resin, resistant to pollution and moisture, also suitable for tropical areas. This product has the characteristics of high precision and large capacity, and can be customized according to customer requirements

Brand Name: Power System Control Model Number: PSC-OSG Usage: Electronic Phase: Single Phase Coil Structure: TOROIDAL Coil Number: AUTOTRANSFORMER Input Voltage Range: 220V Frequency: 50-60Hz Output voltage: 200V, 110V or custom output efficiency: 98% Protection: Overvoltage, Low-voltage, Overload, overcurrent Protection system: Over Voltage, Low Voltage Color: Gray Working Temperature: 2045 humidity: 0-95%

Brand Name: Power System Control Model Number: PSC-OSG Usage: Electronic Phase: Three Phase Coil Structure: TOROIDAL Coil Number: AUTOTRANSFORMER Input Voltage Range: 220V Frequency: 50-60Hz Output voltage: 200V, 110V or custom output efficiency: 98% Protection: Overvoltage, Low-voltage, Overload, overcurrent Protection system: Over Voltage, Low Voltage Color: Gray Working Temperature: 2045 humidity: 0-95%

Brand Name: Power System Control Model Number: PSC-OSG Usage: Electronic Phase: Single Coil Structure: TOROIDAL Coil Number: AUTOTRANSFORMER Input Voltage Range: 220V Frequency: 50-60Hz Output voltage: 200V, 110V or custom output efficiency: 98% Protection: Overvoltage, Low-voltage, Overload, overcurrent Protection system: Over Voltage, Low Voltage Color: Gray Working Temperature: 2045

direct measurement of voltage in high voltage system is not possible because of insulation problem of measuring instruments. it is also not possible to use direct voltage for the system protection purpose due to its high value and high insulation problem protective relays. therefore voltage transformers are used to step-down the high system voltage to low standard value accurately in proportion to their ratio. in order to retain remarkable position in this industry, we are providing a wide array of 11kv ht voltage transformers

direct measurement of voltage in high voltage system is not possible because of insulation problem of measuring instruments. it is also not possible to use direct voltage for the system protection purpose due to its high value and high insulation problem protective relays. therefore voltage transformers are used to step-down the high system voltage to low standard value accurately in proportion to their ratio. in order to retain remarkable position in this industry, we are providing a wide array of 11kv ht voltage transformers

Direct measurement of voltage in High Voltage System is Not possible because of insulation problem of measuring instruments. It is also not possible to use direct voltage for the system protection purpose due to its high value and high insulation problem protective relays. Therefore voltage transformers are used to step-down the high system voltage to low standard value accurately in proportion to their ratio. In order to retain remarkable position in this industry, we are providing a wide array of 11Kv HT VOLTAGE TRANSFORMERS

user friendly design trouble free performance longer service life maintenance free durable finish direct measurement of voltage in high voltage system is not possible because of insulation problem of measuring instruments. it is also not possible to use direct voltage for the system protection purpose due to its high value and high insulation problem protective relays. therefore voltage transformers are used to step-down the high system voltage to low standard value accurately in proportion to their ratio. in order to retain remarkable position in this industry, we are providing a wide array of 11kv ht voltage transformers

User friendly design Trouble free performance Longer service life Maintenance free Durable finish Direct measurement of voltage in High Voltage System is Not possible because of insulation problem of measuring instruments. It is also not possible to use direct voltage for the system protection purpose due to its high value and high insulation problem protective relays. Therefore voltage transformers are used to step-down the high system voltage to low standard value accurately in proportion to their ratio. In order to retain remarkable position in this industry, we are providing a wide array of 11KV FIVE LIMB RESIDUAL VOLTAGE TRANSFORMER.