Power tech solution

Nangloi, Delhi

An AC Fan also known as a Panel Cooling Fan, Instrument cooling fan or Equipment fan is a cooling fan that works on an alternating current and expels air along the axis of the fan. All AC Fan models are available in both ball bearing as well as sleeve bearing. These AC Axial Fans are available in both low speed as well as high speed depending upon the application. The inimitably designed aluminium die casted venturi along with the plastic impeller compliments these shaded pole motor fans in a way that ensures maximumairflows at high static pressures. Energy EfficientLow power consumptionLow noiseVast life span

POWERTECH AIR HEATER U TYPE FOR :- APPLICATIONS:- Baking Chambers, Ovens, Heater Chambers Conveyors, Furnaces Etc. CONSTRUCTION: Air Heaters are manufactured out of high temperature resistance chrome nickle steel tube to withstand a surface temperature upto 600 degree C. Each element is provided with with two adjustable fixing brackets. SUPPLY :- 240V / 1 PH / AC / 50 Hz NOTE:- Special air heating elements and units for higher working temperature upt 650 degree C also available which are used in Glass Decorative / Annealine Lehr.

HIGHTECH OVER THE SIDE ALKALINE/ LEAD COVERED/ CHEMICAL IMMERSION HEATERS FOR ALL: These Heaters are used for alkaline cleaning solution, cirtrus juices and very mild acid bath not corrosive to stainless steel sheet.FOR LCI: These heaters are recommended for nickle, copper or chrome, plating baths and sulphuric acid solution having not more then 10% concentration. Caution. These heaters are not recommended for any other acid.FOR CIT: These heaters are recommended for plating baths such nickels, chorme, gold, silver including ferric and iron chloride solution bright dips and nickels containing, nitric, Phospharicand chromicacids, permagenates, persulphats. Supply voltage 230v/lPh./AC/50Hz

An axial flow fan is a type of industrial fan used to cool machines and equipment which heat up after use. Axial flow fans are the type of compressor, which produces airflow parallel to the axis, thus the name. These fans are equipped with impellers, which suck the air in and discharge in the same direction of the axis. APPLICATIONS:-GeneratorAir compressorDiesel enginesCold storesLifts/ElevatorsFEATURES:-External rotor motorHeavy duty copper winded , varnished & oven baked motorPermanent lubricated bearingClass B insulationTropicalization treatmentVoltage frequency 10 %Best air performance under static pressureUnique fastening system with improved rigidityMaintenance free operationRiveted impeller

Self regulating heating cable provide the most versatility in heat trace design and applications. Constructed of a Semi-conductive heater matrix extruded between parallel bus wires, a self regulating cable adjusts its output to independently respond to ambient temperatures all along its length. As temperatures increase, the heaters resistance increase which lower the output wattage. Conversely, as the temperature decrease, the resistance decreases and the cable produces more heat. So itis no need thermostat in some applications. It will never overheat or burnout even when wrapped by itself(overlapped). It can be cut to any length. So it is a convenient , easy use and energy saving product.

Power Tech Solution specializes in providing custom manufactured band heaters specifically design to meet individual customer requirements, as well as providing a large stock inventory of standard band heaters for immediate delivery. Common ApplicationsAutoclaves & SterilizersBlow Molding Machines (Barrels & Heads)Blown Film DiesDrum HeatingExtrusion DieFluidized BedsFood & Candy ExtrudersFood Service Warming PotsHolding TanksHot Runner Molding BushingsMetallurgical Analyzation EquipmentOil Reclamation SystemsPlastic ExtrudersPlastic Injection Molding MachinesPulp & Paper Processing EquipmentVending Machines

A qualitative range of Bobbin Stainless Steel/ Lead Covering Glass is offered by us to meet with the rising demands of our respected clients. These are made using high quality stainless steel tube with the diameter of 35 mm to 50 mm. The terminals of heaters are covered with a cap. Our range of product is easily fitted with projection for the installation purpose. We offer various customized solution for Bobbin Stainless Steel/ Lead Covering Glass Features:-It saves on energy costs.Reflectors are often not needed.Surrounding work area temperatures are cooler.Bobbin immersion heaters are also available with or without gold plating.

Immersion heaters have a variety of applications in the chemical process industries. Knowing which heaters to specify and how to install them can make a manufacturing process more cost-efficient. Chemical Immersion heaters are particularly suitable for heating Chemicals & Acids. Power Tech Solutions Chemical immersion heater comes with its own unique specifications. Chemical Immersion heaters are the quickest and efficient way to heat chemical solutions through direct contact

The compressor crankcase heater was designed almost as an afterthought to solve a unique problem that affects certain compressors. The problem is that temperature variations inside and outside of the crankcase can cause the oil and refrigerant inside the compressor to change states, migrate, and even mix. Crank Case Heaters are made from Brass/ Stainless Steel/ Special Steel and used to heat oil in various makes of following Air Conditioning Compressors. Kirlaskar, Frick, York, Voltas, K.G. Khosla, Carrier Trane, Copeland Etc. Some of Them are having flanges for fixing in Compressors. Some heaters have provision for Thermostat and operated at 230V. AC 50Hz. Features:-Regulate the temperaturesPrevents spring-time breakdownsReducing the loss of costly refrigerant

Power Tech Solutions Defrost Heaters are designed for many applications such as trays, cooling & condensing coils, refrigerators, Deep Freezers Etc. Both ends of heaters are sealed with silicon leads for connection available in different shapes, watts, & Sheathing. Insulation Strength (Immersion , Under Normal Temp) : 1500V 1 min no checkmate and flashLeaking Electric Current (Immersion, Under Normal Temp) : < 0.02 mA / meterTerminal Connecting Strength : 58.5N 1 min no abnormalityTube Diameter keeping Rate When Bended : > 85%Overload Test : 1.15 times of rated voltage

Technical DataGenerally available from 1.5 Kwto 4.0 Kw, 230 Volts/ AC/50 Hz/Single Phase, Operates upto 550F . Two Lclamps are provided on both ends of heaters for proper installation. ConstructionFinned Air Heaters are consisting of two tubuler mineral filled incoloy-800/stainless steel 321 sheathed elements dia 8 mm, in one unit G.P. Finns (3.5 x 1.5) are provided for quick dissipation of heat. It can be installed in any position as per space requirements. Its 50% wattage can be utilized if required. Its special feature maximum wattage in minimum space. InstallationWithin forced air with Thermostat (Optional) in any position

POWERTECH FINNED AIR HEATERS U TYPE:- APPLICATIONS: -Blower Type Ovens, Heat Chambers, Conveyors, Furnaces and Air Conditioning Etc. CONSTRUCTION: -Made out of high temperature chrome nickle steel tube having 28 / 24 mm round G.I. / S.S. finns provided with 2 brackets/nipples for installation. Designed for rapid and uniform heat transfer for forced convection air heating. Ideal for usage in air ducts and forced air.

Finned tubular air heating elements are like basic tubular elements with the addition of continuous spiral fins brazed to the sheath or rectangular fins crimped to the sheath. Fins greatly increase surface area and permit faster heat transfer to air, resulting in lower surface element temperatures. They can be provided with rectangular fins of various thcknesses. Continuous finned heaters are made with continuous round fins of various diameter and thickness

ApplicationsAir-conditioning, Stoving Paints, Textiles, Leather Drying Chambers, Heating-Arrangements. Technical DataGenerally available from 0.5 Kw to 3.5 Kw, 240 Volts / AC / 50 Hz / Single Phase, Operates upto 400F Spl. Heater can also be made according to specification. ConstructionAre made of Stainless Steel, GP Sheathing having the heat resistance Chrome nickel 80/20 element coil protected under the best insulation to avoid the leakage of current and to ensure the long life of the heaters. Finns *(3 x 1.5), ** (3.5 x 1.5) which increase the output of heat to the maximum dissipation and having screw type terminals on one end for proper connection.

TypeDouble Side Connection 25 W / mtr.Single Side Connection 45 W / mtr. ConstructionThe element of Nickle 80/20 is wrapped on fibber thread then insulated by Teflon coating and then braided by stainless steel wire

Power Tech Solution is considered as a leading supplier of a comprehensive array of Hot Water Generator Heating Element. These products are broadly used for generating hot water. Processed as per the international standards, the provided assortment is of excellent quality, sturdy and rust resistance. Its elegant design and user-friendly nature make it more convents to the users.

Power Tech Solution is engaged in manufacturing and supplying a wide range of Immersion Heaters For Hot Water Generator. These are manufactured in tandem with the set industry standards making our heaters apt for hot water generators. The elements are made from incoloy, stainless steel, copper sheathing, brazed with M.S. flanges suitable for mating flange. Further, these immersion heaters are designed in a wide range of specifications and can be offered in different wattage.

Manufactured out of special steel tube brazed to M.S. Flange provided with thermostat Used for fuel oil heating, oil circulating, oil jacketing etc. Caution: To be fully immersed in before putting in operation.

Manufactured from high temperature bearing insulators, Power Techs Porcelain Heaters offered are used in various industries. Our Porcelain Heater contains elements that are exposed partially in air for better transmission of heat. Porcelain Heater is extensively used in ovens, tanks where draining cannot be done to change the heaters. The Porcelain Heaters offered by Power Tech are known for their high precision, performance and durability. Porcelain Heater is constructed using several refractory ceramic blocks assembled together to the required length. The Nichrome wire heating element is inserted into the ceramic blocks, with a terminal block at one end.

With firm commitment to quality, Power Tech Solution provides a wide assortment of Door Heaters. These door heaters comes with different capacity in terms of wattage. The given door heaters are precisely inspected on several parameters so as to dispatch a flawless range. These door heaters are developed from high grade material & leading technologies in compliance with the international parameters. Features: Precisely designedComes with self regulating tapesLow maintenance cost

DESCRIPTION:- Power Tech Solution is engaged in offering an all-encompassing spectrum of Air Duct Heater. This heater finds usage suitability in non-pressurized air-heating system. This heater is obtainable in various specifications as per the clients needs. Offered heater is examined by our quality experts for make certain its flawlessness. Customers can avail this heater from us at nominal rates. FEATURES:- Constructed as standard unitsTailored to suit Customers Specific requirementSuitable for use in relative humidity upto 90%.Designed for operation in temperature conditions upto 950 FAPPLICATION RANGE:- Air-conditioning (AHU FCU), High Temperature Batteries, Load Bank of Generators, Industrial Drying Ovens, Heat Treatment, Offices, Buildings, Instituties, Retail Stores, and Much More

APPLICATIONS:- RefrigeratorsWarehousesCold storesRoad DefrostingDeep FreezersCHARACTERISTICS:- Complete with water proof designDouble layer insulationMould pressing knot, flexibilitySilicon rubber insulation applicable scope :600C to 2000CCHARACTERISTICS & FEATURES :- Standard sizes are available in 1mtr, 2mtr, 3mtr, 4mtr & 5mtr etc.The whole body uses silicon rubber as the insulation heat conduction material (including power cord), and work environment temperature is 600 to 2000 CGood Heat conducting PropertyGenerate heat energy by passing to directly conduct heat, high thermal efficiency, capable of heating in short time to achieve the effect.Reliable Electrical property

Cartridge Heaters is used in different commercial ventures where restricted hotness is required for constrained space. Electric Cartridge Heater is manufactured from ideal quality metal, S.S. also Lincoln sheathing in ordinary and D structure. Smaller Cartridge Heater could be benefited in low and also in high-density wattage. They are unique in term of value and are accessible at pocket amicable cost. Considered one of the famous producers and suppliers, we are included in offering an extensive variety of Cartridge Heaters. Features:-Strong constructionLong functional lifeHigh efficiencyLess maintenanceExcellent heat transfer

DESCRIPTION:- Combistat with single pole stem control and double pole safety limiter FEATURES:- Combistat control and safety function Patented MFS technology or traditional bimetal for independent non self resetting safety option Direct plug-in to heating element to reduce wiring and mounting costs Tamper proof housing Factory pre-set fixed temperature, OEM adjustable or end-user adjustable temperature Multiple control knob options connection for signal lamp. PRINCIPLE OF OPERATION :- The differential expansion of the sensing element causes the opening of a snap-action switch in the thermostat head. In case of abnormal temperature rise, the patented MFS technology in the stem or traditional bimetal ensures double pole safety. The limiter is manually resettable

APPLICATIONS:- Thermostats are ideal for temperature control of Electric Geysers, Boilers, Ovens, Panel Boards, Air Handling Units Etc. CONSTRUCTION:- The micro gap switch assembly in mounted on a heat resistance base, with rigid brass pillar terminals. Heavy duty contacts are provided for long trouble free life. A thermosetting cover with clear and precise graduations is provided along with a setting knob. Thermostat can be fixed in any position. These are available in standard stem lengths of 7 (175 mm)/230 Volts and 11 (275 mm)/230 Volts, 18 (457 mm)/230 Volts, on the operational load of 20 amps. Also available in 110 V&415V PRINCIPLE OF OPERATION :- With temp rise, the principal of differential expansion of brass tube and a Nickel/Iron (Invar) Rod is used to actuate a highly accurate shap action micro gap switch located in the head which makes it keep the temperature constant within the differential i.e. A single pole, single throw, normally closed circuit braks (opens) on rise of temperature.

We are among the industry leaders, engaged in offering Fan Coil Unit to our esteemed customers. The offered units are designed by expert professionals with the aid of high grade materials and cutting edge technology. These systems are compact in size and are made available in single skin or double skin construction. Offered units are made available at competitive prices. With phenomenal market understanding, we are able to introduce an extensive range of Fan Coil Unit. We have expert team of engineers who make sure that every air shower, filter, control panel, pass box, buffers, sensors and other concerned equipment is installed and placed precisely at the position where it can deliver the most. Furthermore, clients can customize the unit according to the requirements. FEATURES:- Made of steel of superior quality to offer rugged constructionLong lifeQuality aluminium fins and copper tubes are used for efficient cooling and heatingSingle phased motors are used for noise reduction of the centrifugal blades