Powercell Energies Pvt Ltd Delhi

• MOQ 50 Piece(s)
• Country of OriginIndia
• EFFICIENTCOMPACT
• RELIABLECUSTOMISED

Powercell PHANTOM SERIES INVERTER is one of the most sophisticated sine wave output inverter, with reliable, regulated and stabilized Pure Sine Wave Output, is a complete power generation system that is suitable for all types of commercial establishments and is capable of running everything from Lights to Air Conditioners to Lifts and Elevators, in the most cost effective manner.POWERCELL Sine Wave Inverter supplies pure power and is 100% safe to run most sophisticated, expensive and sensitive office equipment without the irritating humming sound. It has already established itself as a most reliable option to generators in the following industries/ segments. PINT5KVA • MICRO Processor / DSP based PWM Technology using IGBT • Best Suited for most High Capacity Sophisticated Appliances Advanced Battery Management for Longer Battery Life & Quick Charging LCD Panel Display for Status and Faults / Auto Self Test on LCD Display Inbuilt TDR (in 5.5KVA & above models) for compressor based application, e.g. Air Conditioners

Solar Power Conditioning Unit (pcu) is An Integrated System Consisting of a Solar Charge Controller, Inverter and a Grid Charger. It Provides the Facility to Charger the Battery Bank Either Through Solar or Grid/dg Set. the Pcu Continuously Monitors the State of Battery Voltage, Solar Power Output and the Loads. Due to Sustained Usage of Power, When the Battery Voltage Falls Below a Preset Level, the Pcu Will Automatically Transfer the Load, the Grid/dg Power and also Charge. Once the Batteries are Charged to the Preset Level, the Pcu Cuts Off the Grid/dg Power from the System and Will Restore to Feeding the Loads from the Battery Bank & also Restore to Charging the Battery from the Available Solar Power. the Pcu Always Gives Preference to the Solar Power and Will Use Grid/dg Power Only When the Solar Power/ Battery Charger is Insufficient to Meet the Load Requirement

• MOQ 50PCS Piece(s)
• BIG CHARGER20AMPS,30AMPS

PHINT850 Highlights: • 12V DC input • 850 watts continuous, 1700 watts short period (upto 5 sec.) peak power support • User selectable 20 Amp. 2 stage Constant Current type Battery Charger • User selectable 1/2 cycle (10 msec.) or 1 cycle (20 msec.) transfer time • User selectable parameters • Reliability enhanced large-transformer design with protected DC terminals ________________________________________ Package Includes: • PHINT850 Substitute Power Source • Instruction manual with warranty information ________________________________________ Description: POWERCELL PHINT850 DC-to-AC Power Inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 850 watts of continuous 230V AC power from any 12V Battery or automotive DC source. PHINT850 delivers up to 200% of the continuous output for up to 5 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When AC is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 2 stage, user selectable 20 Amp charging system. In UPS mode, the SPS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation. Passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Optional SPS-REM wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status information (SPS-REM sold separately). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages. ________________________________________ Features: • PHINT850 serves as an automotive or stationary DC-to-AC Power Inverter with automatic Line-to-Battery transfer and integrated Battery charger • Supports 230V AC output from a 230V AC Line power source or 12V DC Battery source • User selectable 1/2 cycle (10 msec.) or 1 cycle (20 msec.) transfer time between line and battery power supports UPS protection during blackouts and voltage fluctuations • 850 watts continuous AC output in inverter mode. Supports 200% of the continuous rating for a short period of upto 5 sec. • 4 level user selectable 20 Amp. rated advanced 2 stage Constant Current type Battery charger with adjustable settings for Wet/Gel Battery types offers fast, reliable battery recharging • Temperature and DC current dependent auto switching advanced forced air cooling • Reliability enhanced large-transformer design • Auto Overload reset function • Moisture-resistant construction enables vehicular or marine operation in high humidity environments • Set of nine front panel LED’s display Input AC status, AC/DC operational modes, Overload status, DC voltage level, shutdown status and system fault status • Set of 8 configuration dipswitches support Wet/Gel Battery charging profiles, Charging Current selection, Input voltage window selection, Overload auto reset enable/inhibit, Buzzer enable/inhibit and Transfer time selection • Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop • Front panel remote control connector enables remote off/on switching (requires optional SPS-REM remote accessory) • Compact in size ________________________________________ TECHNICAL SPECIFICATIONS Output Power (continuous) 850W Surge rating for 5 sec. 1700W Inverter voltage regulation 230 VAC +/-5% Output frequency 50Hz +/- 0.3% Output wave form PWM Modified Sine Wave Efficiency at full load > 87% AC transfer switch 20 Amp. ________________________________________ CHARGER SPECIFICATIONS Charge rate† 20A AC input voltage range 180 - 270V AC Battery voltage (nominal) 12V DC Battery voltage range 10.5 – 15V DC Charge control 2 Stage Constant Current Battery type settings† Wet Cell (Vented) / Gel Cell (Dry) ________________________________________ GENERAL SPECIFICATIONS AC Input voltage range 150 – 270V AC Input Frequency 50Hz +/- 10% Automatic Transfer Time† 10 msec. to 20 msec. Operating & Storage temperature 0°C - 45°C Cooling Temperature and DC current dependent auto switching forced air Optional Remote Wired SPS-REM (5 mtrs. wire length) Dimensions (H x W x L) in mm. 180 x 160 x 300 Weight in kg. (approx.) 11 Warranty 24 months (terms and conditions of warranty applicable) Note: R&D being a continuous process to enhance system performance and reliability, specifications are subjected to change without prior notice † User selectable