The use of Generators has become a very common in almost every passive infrastructure companies, Industries, hospitals, Townships etc. while using these Generators a number of challenges are faced by the user such as maintaining the Quality of grid power, asset protections, generator maintenance, capturing real time data, Remotely monitoring of the generator, fuel theft monitoring, Data collection Analysis issues, Human dependency etc.The GMS is designed specifically for emergency power generators to monitor engine operations and detect pre-alarms or failures. This insures you of increased generator availability and a rapid response to service problems. The GMS monitors the power generators placed at the remote areas and increases its Efficiency by monitoring the various parameters of generator, Reporting critical Problems minimizes downtime and maximizes availability by sending generator failure messages instantly to you for diagnosis and emergency service dispatch if required. The GMS is used in standby, prime and rental power applications. It works on GSM GPRS technology, GMS can monitor various parameters such as external power supply, the battery voltage, DG run hours, fuel level, etc. In normal condition it generates highly elaborative and explanatory reports in the form of Graphs and comparative data sheet. These web based reports are easily accessible, anywhere, any time. You will instantly receive reports over the Internet via a secure web page. Typical reports include system status, last update and summary reports. Key FeaturesThe key features of the product are mentioned as follows:-Monitor up to 8 Digital inputs, DG battery voltage, Temperature. Transducers Voltage etc.Gives interactive reports in case, there is any need for keeping track of the overall fuel consumption.Monitors Fuel level & fuel theft Immediate alarm sensing & Display Fuel wastage Reduction Operational Cost ReductionRelay ONOFF through Web & SMSBette

We are offering remote monitoring system (rms).A variety of security and energy saving devices one of those devices is called as remote monitoring system (rms) which is designed to monitor and manage the telecom sites and control them to keep a continuous network session. The rms is designed with an aspect of monitoring and performing all the remote operations, it uses a combination of hardware & software to measure different parameters. The measured parameters are used to analyze the performance of the cell site and keep a track on them.There are a number of problems which usually occurs in sites of remote areas, in order to maintain a continuous network session an eye starting from the power supplied to the transmitted signal has to be kept which is a very difficult task to do. The use of rms at the remote areas has successfully overcome all these problems occurring at the sites.The rms monitors various physical parameters which are very important to keep the sites live for proper communication network, any type of variations in these parameters may result in energy loss, time loss and money loss.The hardware devices like transducers & sensors that are used in rms measures all type of parameters from the cell site and by using wireless communication medium which consist of gprs technology sends the measured values to the centralized server where it is converted into webpage that can be seen anywhere. The centralized server is made up of software device which has java technology that can handle large number of data, sites and traffic. A single server can handle up to 10, 0000 remote sites.Reporting of critical problems minimizes the network failure of cell sites and reduces operation and maintenance cost, increases asset life & overall performance of the sitesremote monitoring system provides a feature, where user can name any alarm as per his desire by using hyper terminal, also user has the control over assignment of relay to preferred alarm and also allocation of data logging feat

Powertech has created a fuel sensor (FMS), which digitally senses the fuel level as the level increases or decreases. Its accuracy level is high due to change in fuel level causes change in count of sensor. These counters are enclosed in noncorrosive pole and they are dipped in the Diesel tank. Noncorrosive pole helps in weather proofing, prevents the wearandtear of sensor. Due to temperature inside Diesel tank is lower than outer area, the performance of sensor become double fold. Sensors shape makes it easier to mount. Its different design helps in reducing human error and attempt of tempering reduces as well. Mounting seal assist in reorganization any attempt of damaging the sensor or theft. Inbuilt regulate power supply will provide the constant power supply to system, which minimize the chances of fluctuation in reading. Fuel level sensor enables us to avoid situation like Site being down due to DG couldnt run! Fuel was low! With Continuous Fuel level sensing, you will have enough time to refill and avoid being in that type of putdown condition. Fuel consumption can be monitored with its change in level with DG run, Also the fuel theft can be stopped at some extend. With Fuel level monitoring you will have proper accounting of fuel refill, fuel consumption and DG set performance. You will also have got to know about that extra amount of Fuel getting disappear everyday without any accounting! The Benefits Timely Information of Top up & drain Daily fuel consumption analysis Fuel theft can be ceased It also helps to avoid situations like site down due to low fuel in DG.

We offer battery monitoring system. battery monitoring system (bms) system monitors the bank voltage, bank current, ah (ampere hour) capacity of the battery bank, it also detects cell failure of the battery bank. It monitors the charging & discharging of bank. bms shows the discharged & charged kwh for calculating battery bank efficiency. Battery monitoring system also provides cumulative discharged ah for battery life calculation, battery bank discharge cycle counter, data for monitoring charging & discharging of bank, battery chargedischarge hrs counter.

The use of Generators has become a very common in almost every passive infrastructure companies, Industries, hospitals, Townships etc. while using these Generators a number of challenges are faced by the user such as maintaining the Quality of grid power, asset protections, generator maintenance, capturing real time data, Remotely monitoring of the generator, fuel theft monitoring, Data collection Analysis issues, Human dependency etc.The GMS is designed specifically for emergency power generators to monitor engine operations and detect pre-alarms or failures. This insures you of increased generator availability and a rapid response to service problems. The GMS monitors the power generators placed at the remote areas and increases its Efficiency by monitoring the various parameters of generator, Reporting critical Problems minimizes downtime and maximizes availability by sending generator failure messages instantly to you for diagnosis and emergency service dispatch if required. The GMS is used in standby, prime and rental power applications. It works on GSM GPRS technology, GMS can monitor various parameters such as external power supply, the battery voltage, DG run hours, fuel level, etc. In normal condition it generates highly elaborative and explanatory reports in the form of Graphs and comparative data sheet. These web based reports are easily accessible, anywhere, any time. You will instantly receive reports over the Internet via a secure web page. Typical reports include system status, last update and summary reports. Key FeaturesThe key features of the product are mentioned as follows:-Monitor up to 8 Digital inputs, DG battery voltage, Temperature. Transducers Voltage etc.Gives interactive reports in case, there is any need for keeping track of the overall fuel consumption.Monitors Fuel level & fuel theft Immediate alarm sensing & Display Fuel wastage Reduction Operational Cost ReductionRelay ONOFF through Web & SMSBette

We are offering remote monitoring system (rms).A variety of security and energy saving devices one of those devices is called as remote monitoring system (rms) which is designed to monitor and manage the telecom sites and control them to keep a continuous network session. The rms is designed with an aspect of monitoring and performing all the remote operations, it uses a combination of hardware & software to measure different parameters. The measured parameters are used to analyze the performance of the cell site and keep a track on them.There are a number of problems which usually occurs in sites of remote areas, in order to maintain a continuous network session an eye starting from the power supplied to the transmitted signal has to be kept which is a very difficult task to do. The use of rms at the remote areas has successfully overcome all these problems occurring at the sites.The rms monitors various physical parameters which are very important to keep the sites live for proper communication network, any type of variations in these parameters may result in energy loss, time loss and money loss.The hardware devices like transducers & sensors that are used in rms measures all type of parameters from the cell site and by using wireless communication medium which consist of gprs technology sends the measured values to the centralized server where it is converted into webpage that can be seen anywhere. The centralized server is made up of software device which has java technology that can handle large number of data, sites and traffic. A single server can handle up to 10, 0000 remote sites.Reporting of critical problems minimizes the network failure of cell sites and reduces operation and maintenance cost, increases asset life & overall performance of the sitesremote monitoring system provides a feature, where user can name any alarm as per his desire by using hyper terminal, also user has the control over assignment of relay to preferred alarm and also allocation of data logging feat

Powertech has created a fuel sensor (FMS), which digitally senses the fuel level as the level increases or decreases. Its accuracy level is high due to change in fuel level causes change in count of sensor. These counters are enclosed in noncorrosive pole and they are dipped in the Diesel tank. Noncorrosive pole helps in weather proofing, prevents the wearandtear of sensor. Due to temperature inside Diesel tank is lower than outer area, the performance of sensor become double fold. Sensors shape makes it easier to mount. Its different design helps in reducing human error and attempt of tempering reduces as well. Mounting seal assist in reorganization any attempt of damaging the sensor or theft. Inbuilt regulate power supply will provide the constant power supply to system, which minimize the chances of fluctuation in reading. Fuel level sensor enables us to avoid situation like Site being down due to DG couldnt run! Fuel was low! With Continuous Fuel level sensing, you will have enough time to refill and avoid being in that type of putdown condition. Fuel consumption can be monitored with its change in level with DG run, Also the fuel theft can be stopped at some extend. With Fuel level monitoring you will have proper accounting of fuel refill, fuel consumption and DG set performance. You will also have got to know about that extra amount of Fuel getting disappear everyday without any accounting! The Benefits Timely Information of Top up & drain Daily fuel consumption analysis Fuel theft can be ceased It also helps to avoid situations like site down due to low fuel in DG.

We offer battery monitoring system. battery monitoring system (bms) system monitors the bank voltage, bank current, ah (ampere hour) capacity of the battery bank, it also detects cell failure of the battery bank. It monitors the charging & discharging of bank. bms shows the discharged & charged kwh for calculating battery bank efficiency. Battery monitoring system also provides cumulative discharged ah for battery life calculation, battery bank discharge cycle counter, data for monitoring charging & discharging of bank, battery chargedischarge hrs counter.