We are offering trb automation line, special purpose machine. This line is developed for facing, notching, coining & spreading of cage blanks of taper roller bearings (trb). All the functions including feeding of cups to facing machine, indexing attachments for notching coining & spreading are fully automatic. These functions are carried by use of the necessary mechanical electrical or pneumatic means. in this auto line, all the equipment like automatic facing machine, automation attachment to press, auto spreading press, feeders & conveyors have facility for change tooling to suit the range of cage sizes. The lines are built as process from left to right, meaning input on left hand side & output on right hand side called as left line. Alternatively, right line or the r line means process from right to left. These two lines can be installed facing each other with a passage in between so that, it is possible for a single operator & a q.c person to look after the production. input to this production line is drawn cups with centre hole as per finished size. The output is taper cage with deformation at the base as per customer requirement.

We are manufacturer and exporter of Spin Coater. This equipment used in laboratory for experimentation involved the coating process on various substrates including thin films. The spinning experiments can be conducted at different speeds and for different duration. Specification:1. Overall size L x W x H : 556 x 256 x 287 (All dimensions in mm)2. Speed Range :600 - 6000 rpm 3. Vacuum chuck Size 2 standard supply. (Other sizes also available at extra cost.)4. Glass Window on the top cover for inspection. 5. Control panel with timer for setting the spin time & speed. 6. Digital Timer & Digital RPM Counters7. Input Power: Single Phase 230 VAC 10% . Frequency -50Hz. 8. Motor Power : 0.5 HP, 2800 RPM 9. Nickel coated spill bowl. 10. Lid closure interlock. 11. Syringe - Facility for dropping solvent on substrate.

We offer cage stacking machine is a special purpose machine, intended for mechanized and oriented stacking of cages used bearing industry. The machine stacks cages onto four separate rods, forming four stacks of opposite orientations. Cages in vibratory bowl feeder are made to rotate in circular fashion are lifted up by twin chain & hook mechanism. Also the cages are singled out & transferred to a slant al plate. cages move down the twin tracks under the influence & gravity. Excess cages are returned to the vibratory bowl via a covered chute. The cages further travel horizontally on guide rod pushed by a chain & drive mechanism. Oriented cages are dropped in two stack rods on left & two track rods on right hand side.

We are manufacturer of elevator conveyors for components, which are used in automation process for shifting the components in vertical & horizontal direction. Geared motors are used to drive the slat chain conveyors. Our products are having reasonable rates & good quality.

We are manufacturer of drop testing machine. It is essential to ensure the product reaching the customer end in serviceable condition. On this machine the packed product is dropped through a specified height in different orientations. All machine functions are controlled through a hand-held control pendant. specification:drop height : 400 - 1200 mmdrop positions : face, edge, cornerdrop box size : 500*500*500 mmmax drop weight : 50 kgdrop control: electromagnetic clutchdrop error: 5 mmpower: 420 vequipment size: 170012002200 mm (length width height)equipment weight : 200 kg.

We are manufacturer of assembly work station with an adjustable height bench, over-head light and compartment for stacking components, assembly fixtures. below are some of the application :workstations for production & assembly of various automobile components & units gear shifter lever assemblyparking brake assemblywindow regulator assemblyturbocharger assemblypump & valve assemblygearbox assemblysheet metal assembly nozzle & cap assembly.

We are offering test rig machine as custom built to check various parameters of components / subassemblies. Various examples are listed below. 1 centrifuge test machines for acceleration up to 5000 g2 centrifuge for biochemistry laboratories. 3 drop testing machine to check the packaging strength. 4 pull of test machine to test adhesion strength5 high speed spin testing machine for speed up to 60, 000 rpm for performance testing of products. 6 endurance test rig for fatigue testing of automobile components.

We are offering centrifugal oil extractor. Is your money going down the drain? please check if you are losing, valuable straight cutting oil with chippings & burrs. Now you can recover it from oil soaked burr by using a unique machine with fastened payback period centrifugal oil extractor. features:ergonomically designed rigid metal bodyeasy to operaterecover almost 90% of oil present in the chippings of burrsuch recovered oil can be directly reusedpower consumption : 1 kwpayback period 4 to 6 months specification: machine material: stainless steelvoltage: 380 vbarrel capacity : 12 to 15 kgprocessing capacity : 2 tons shift.

We offer automatic assembly machine are designed in various configurations. Fully automatic, semi automatic or assembly workstations. Operations include components placement pressing fastening. the working of this machine is on customize basis. application area are as follows: 1. assembly automation of motors used in windshield washing pump2. automatic riveting machine for bearing assembly with balls and cages3. automatic stack assembly machine for armature4. automatic high speed assembly of ball bearings5. belt conveyors for industrial automation6. cable assembly set up for automobiles7. clutch assembly machine for tape deck8. conveyor automation for assembly and testing of roller bearings9. high speed rivet inserting machine for bearing cages10. steel wire conduit making machines

We are offering conveyorized washing machine. industrial washing machines are designed for different types of industrial components . We have developed conveyorized washing machine for half bearings & rotary washing machine for carburetors. features:1. centrifugal washing machines2. conveyorized inline washing machines3. turbulence wash for heavy individual components specification:1. batch type: spray washing mc size a3, a4 for industrial components2. cycle time: 10-12 min3. drive: heavy duty motor co-ordinate with gear box, pulley v belt drive4. capacity: 15 kg batch to 1000 kg.

We are manufacturer of rotary pneumatic cylinder. It is a special purpose cylinder with rotary connection & linear movement used for collet clamping. There are three models as per force requirement. It did not have any kind of stroke during the swings periods. specification:type: machine attachment material: aluminumbore of cylinder: 25, 32, 40, 50, 63 mm of diameterrotation angle: 0, 45, 60, 90 degree optionalfour optional swing angles: 0 45 60 90 degree.

We are manufacturer of special purpose hydraulic press. it can be supplied as per the requirement. A hydraulic press uses a hydraulic cylinder to generate a compressive force. hydro pneumatic or pure pneumatic presses also can be supplied. Plate heating option is available. specification:operation: manual and autopower : 220vcapacity: 50-3000tstroke: 50-2000 mm.

We are the manufacturer of paper strip feeder & cutter. This is an automatic machine, which unwind a big roll of paper, feeding the same with required length & cutting as per required length. specifications :1. unwinding of the paper roll @100mm dia from the reel. 2. adjustable feeding length max 100mm3. adjustable cutting length max 100mm. 4. paper quality: good paper quality required. 5. work on electro pneumatic power. 6. pneumatic power required for running. (electric power option also available )

We are offering trb automation line, special purpose machine. This line is developed for facing, notching, coining & spreading of cage blanks of taper roller bearings (trb). All the functions including feeding of cups to facing machine, indexing attachments for notching coining & spreading are fully automatic. These functions are carried by use of the necessary mechanical electrical or pneumatic means. in this auto line, all the equipment like automatic facing machine, automation attachment to press, auto spreading press, feeders & conveyors have facility for change tooling to suit the range of cage sizes. The lines are built as process from left to right, meaning input on left hand side & output on right hand side called as left line. Alternatively, right line or the r line means process from right to left. These two lines can be installed facing each other with a passage in between so that, it is possible for a single operator & a q.c person to look after the production. input to this production line is drawn cups with centre hole as per finished size. The output is taper cage with deformation at the base as per customer requirement.

We are manufacturer and exporter of Spin Coater. This equipment used in laboratory for experimentation involved the coating process on various substrates including thin films. The spinning experiments can be conducted at different speeds and for different duration. Specification:1. Overall size L x W x H : 556 x 256 x 287 (All dimensions in mm)2. Speed Range :600 - 6000 rpm 3. Vacuum chuck Size 2 standard supply. (Other sizes also available at extra cost.)4. Glass Window on the top cover for inspection. 5. Control panel with timer for setting the spin time & speed. 6. Digital Timer & Digital RPM Counters7. Input Power: Single Phase 230 VAC 10% . Frequency -50Hz. 8. Motor Power : 0.5 HP, 2800 RPM 9. Nickel coated spill bowl. 10. Lid closure interlock. 11. Syringe - Facility for dropping solvent on substrate.

We offer cage stacking machine is a special purpose machine, intended for mechanized and oriented stacking of cages used bearing industry. The machine stacks cages onto four separate rods, forming four stacks of opposite orientations. Cages in vibratory bowl feeder are made to rotate in circular fashion are lifted up by twin chain & hook mechanism. Also the cages are singled out & transferred to a slant al plate. cages move down the twin tracks under the influence & gravity. Excess cages are returned to the vibratory bowl via a covered chute. The cages further travel horizontally on guide rod pushed by a chain & drive mechanism. Oriented cages are dropped in two stack rods on left & two track rods on right hand side.

We are manufacturer of elevator conveyors for components, which are used in automation process for shifting the components in vertical & horizontal direction. Geared motors are used to drive the slat chain conveyors. Our products are having reasonable rates & good quality.

We are manufacturer of drop testing machine. It is essential to ensure the product reaching the customer end in serviceable condition. On this machine the packed product is dropped through a specified height in different orientations. All machine functions are controlled through a hand-held control pendant. specification:drop height : 400 - 1200 mmdrop positions : face, edge, cornerdrop box size : 500*500*500 mmmax drop weight : 50 kgdrop control: electromagnetic clutchdrop error: 5 mmpower: 420 vequipment size: 170012002200 mm (length width height)equipment weight : 200 kg.

We are manufacturer of assembly work station with an adjustable height bench, over-head light and compartment for stacking components, assembly fixtures. below are some of the application :workstations for production & assembly of various automobile components & units gear shifter lever assemblyparking brake assemblywindow regulator assemblyturbocharger assemblypump & valve assemblygearbox assemblysheet metal assembly nozzle & cap assembly.

We are offering test rig machine as custom built to check various parameters of components / subassemblies. Various examples are listed below. 1 centrifuge test machines for acceleration up to 5000 g2 centrifuge for biochemistry laboratories. 3 drop testing machine to check the packaging strength. 4 pull of test machine to test adhesion strength5 high speed spin testing machine for speed up to 60, 000 rpm for performance testing of products. 6 endurance test rig for fatigue testing of automobile components.

We are offering centrifugal oil extractor. Is your money going down the drain? please check if you are losing, valuable straight cutting oil with chippings & burrs. Now you can recover it from oil soaked burr by using a unique machine with fastened payback period centrifugal oil extractor. features:ergonomically designed rigid metal bodyeasy to operaterecover almost 90% of oil present in the chippings of burrsuch recovered oil can be directly reusedpower consumption : 1 kwpayback period 4 to 6 months specification: machine material: stainless steelvoltage: 380 vbarrel capacity : 12 to 15 kgprocessing capacity : 2 tons shift.

We offer automatic assembly machine are designed in various configurations. Fully automatic, semi automatic or assembly workstations. Operations include components placement pressing fastening. the working of this machine is on customize basis. application area are as follows: 1. assembly automation of motors used in windshield washing pump2. automatic riveting machine for bearing assembly with balls and cages3. automatic stack assembly machine for armature4. automatic high speed assembly of ball bearings5. belt conveyors for industrial automation6. cable assembly set up for automobiles7. clutch assembly machine for tape deck8. conveyor automation for assembly and testing of roller bearings9. high speed rivet inserting machine for bearing cages10. steel wire conduit making machines

We are offering conveyorized washing machine. industrial washing machines are designed for different types of industrial components . We have developed conveyorized washing machine for half bearings & rotary washing machine for carburetors. features:1. centrifugal washing machines2. conveyorized inline washing machines3. turbulence wash for heavy individual components specification:1. batch type: spray washing mc size a3, a4 for industrial components2. cycle time: 10-12 min3. drive: heavy duty motor co-ordinate with gear box, pulley v belt drive4. capacity: 15 kg batch to 1000 kg.

We are manufacturer of rotary pneumatic cylinder. It is a special purpose cylinder with rotary connection & linear movement used for collet clamping. There are three models as per force requirement. It did not have any kind of stroke during the swings periods. specification:type: machine attachment material: aluminumbore of cylinder: 25, 32, 40, 50, 63 mm of diameterrotation angle: 0, 45, 60, 90 degree optionalfour optional swing angles: 0 45 60 90 degree.

We are manufacturer of special purpose hydraulic press. it can be supplied as per the requirement. A hydraulic press uses a hydraulic cylinder to generate a compressive force. hydro pneumatic or pure pneumatic presses also can be supplied. Plate heating option is available. specification:operation: manual and autopower : 220vcapacity: 50-3000tstroke: 50-2000 mm.

We are the manufacturer of paper strip feeder & cutter. This is an automatic machine, which unwind a big roll of paper, feeding the same with required length & cutting as per required length. specifications :1. unwinding of the paper roll @100mm dia from the reel. 2. adjustable feeding length max 100mm3. adjustable cutting length max 100mm. 4. paper quality: good paper quality required. 5. work on electro pneumatic power. 6. pneumatic power required for running. (electric power option also available )