Founded in Gujarat(India), the company has garnered wide appreciation for its seamless quality products and client centric approach. Combining our expertise with the technology that we possess, we take the responsibility to deliver utmost quality Openwell Submersible Pump to the customers.

Intro :

C.R.I. Openwell Submersible Pumpsets are Ideally suitable for Openwells or Tanks where a wide fluctuation of water level occur. This work under water and rest at the Bottom of the well or Tank. Hence Suction and Priming problem will not arise. The optimal design of impellers and diffusers enables the best possible hydraulic efficiency. Motor sealing is made by polymers, rings, oil seals and sand guard to avoid ingress of well water / sand into the motor. Pressure equalizing rubber diaphragm is provided to guard the pressure and volume variation of water inside motor. Motor must be filled with clear, cold, drinking water as detailed in our operators manual. Three -phase motor requires an adequate motor protection control panel.

Applications

• Domestic


• Irrigation


• Gardens


• Rural water supply

Features

• No Suction and Priming Problem


• Noiseless Operation


• High Operating efficiency


• Can be easily dismantled and repaired

• 
  
  
  
  • Light weight and easy to install.
  
  
  • Improved hydraulic design with increased efficiency and reduced power consumption.
  
  
  • Noise free operation.
  
  
  • Modular construction and easily interchangeable parts.
  
  
  • Built in NRV with minimum friction.
  
  
  • Radial and mixed flow impeller designs including high head versions in shell type assembly.
  
  
  • Impellers and diffusers of high quality engineering polymer, stainless steel shell corrosion resistance and LTB.
  
  
  
  

  Domestic and Community water supply, water supply to high- rise buildings, housing, complexes,

  
  

  bungalows and industries, irrigation of farms, cattle and poultry farms, dairies, cooling water

  
  

  circulating system, fire fighting system, fountains.

  
  

• Easy installation and low operating cost


• Improve efficiency and minimal maintenance.


• Easy handling with an eye bolt.


• Accurate control on the uniformity in air gap to minimize vibration.


• Low temperature with class A insulation insures long trouble free operation

Irrigator (Flood, Sprinkler, Drip), Drinking water supply, Industrial water supply,

Cooling water circulating.

• Applications

• Domestic water supply


• Pressure boosting


• Irrigation


• Fountains


• Septic effluent pumping


• Water distribution

• 4 performance ranges 35, 45, 60 and 90 gpm


• Stainless steel shaft, shell, intake screen and cableguard


• Stainless steel discharge head and motor bracket


• High flow impellers and stages are glass-filled Noryl * for maximum efficiency


• Ceramic shaft sleeve and rubber discharge bearing eliminates sand wear


• Intermediate bearing for increased shaft stability


• Floating eye and hub seals for improved performance and efficiency


• Stainless steel hex pump shaft, shell and shaft coupling


• High capacity upthrust assembly for protection during start-up and operation (45, 60 and 90 gpm models)


• Powered by Franklin corrosion-resistant submersible motors

Easy installation and low operating cost.

Improved efficiency and minimal maintenance.

Dynamically Balanced rotors and impellers.

Easy Handling with an eye bolt.

Deep groove ball bearings packed with right quantity of special grease

ensure long life.

omestic and community water supply, water supply to housing, Complexes,

bungalows and industries, Irrigation of farms, Cattle and poultry farms, Dairies,

Cooling water Circulating systems, Fountains.

• Water distribution / pressure boosting


• Rainwater collection


• Irrigation / Gardening / Sprinklers


• Dewatering


• Wash down unit


• Fountains


• Other various installations

• Features

• Compact close-coupled design, robust and rust resistant


• Impellers and diffusers are made of stainless steel in order to achieve durability, superior efficiency and the highest performances


• Double mechanical seal separated by an oil* chamber for maximum motor protection


• *In compliance with FDA Food, Drug Administration and the annex to G.U. no. 104 of 20/04/73 for oils in contact with food stuffs


• Plug-in type power cable and level control (floaters) for easy replacement


• Heavy duty over size motor shaft


• Stainless steel water proof capsule to protect the motor


• Motor cooling is guaranteed by the pumped liquid

• Specifications

• Capacities up to 14 m3/hr


• Heads up to 11 Bar


• Discharge outlet 1W Rp


• Maximum working pressure 15 Bar


• Maximum immersion depth 20 m


• Maximum allowable amount of sand 50 gr/m3


• Maximum solids size up to 2 mm


• Liquid temperature range -5C to 40C


• Continuous operation either in vertical or horizontal position


• Motor range: 0, 55kW to 3kW


• Asynchronous, Class F insulation, IP 68 protection


• 20 m of power cable type H07RN F is supplied with the standard version

• 
  

  Material of construction & Engineering Data

  
  

  MOTOR (DOL START)
  2 Pole Induction continues rated motor with squirrel cage rotor.
  Stator insulation class F (155 C)
  Speed: 2800 RPM (Approx)
  Power rating : 1.1 Kw (1 Phase & 3 Phase)
  1.5 Kw (1 Phase & 3 Phase)
  Current : 8 Amps; 2.5 Amps; 11 Amps; 3.8 Amps Respectively
  Maximum Start / stop Per hour : 10

  
  

  POWER SUPPLY :
  415 V, 3 Phase 50 Hz, AC supply.
  230 V, 1 Phase (with Control panel).

  
  

  BALL BEARINGS :
  The rotor shaft is carried in two single row, deep groove ball bearing. The bearings are filled with high temperature

  
  

  grease containing special anti-corrosives additives ensuring no maintenance required for life.

  
  

  POWER CABLE :
  Water proof / oil proof, PVC insulated double sheathed, copper conductor flexible cable of size.
  4 Core 1.5 sq.mm. 15 meter length for model CFDW 150S / 150T.
  4 Core 1.5 sq.mm. 15 meter length for model CFDW 200S / 200T.

  
  

  SHAFT SEAL :
  Oil bath type double Mech-Seal & Oil Seal ensures a longer pump life.

  
  

  CORROSION RESISTANT :
  Outer & Inner stator in SS 304.
  Rotor Shaft SS 410
  Impeller SS 410. Also available in SS 304 (Optional)
  Nitrile rubber Moulded Diffuser.

  
  

  STRAINER :

  
  

  MS epoxy coated with 6mm round holes, also available in SS (Optional).

  
  

  SUBMERGENCE :

  
  

  Submergence below liquid surface min 25mm, max. 10 mtrs.

  
  

Equipped with an automatic reset motor protector/heavy duty bearing High efficient copper wound motor / In-build lip seal to prevent ingress of slit / With / Without float switch.

Draining sewage water from hotels, houses, commercial building, complexes etc. / Pumping waste water in industries /

Pumping sewage water from stock farm and manhole sewage / sewage treatment plant / pumping municipal sewage

water / Septic tank / Leather factories

For years, we are engaged in dealing of Borewell Submersible Pump, as we are its reckoned supplier in the market. Superior transportation facilities, efficient workforce and on-time delivery of the products make us stand out from the crowd.

Detail : C.R.I. 80 mm (3) Borewell Submersible pumpsets is firmly coupled to a submersible electric motor which operates submerged beneath the surface of water. Built-in check valve prevents back flow and reduces the risk of water hammering.

Applications

• Domestic and municipal water supply


• Rural water supply


• Irrigation


• Sprinkler system


• Pressure boosting units and Fire fighting system


• Industrial and mining application


• Fountains


• Ponds and Gardens

PUMPED LIQUIDS

Clean, thin, non-aggressive, non explosive, clear, cold, fresh water without abrasives, solid particles or fiber having the following characteristics.

Features

• Motor portion covered with corrosive resistance Stainless Steel (SS 304) shell


• Floating impeller design prevents blockage


• More longevity and hygiene


• High operating efficiency


• Specially designed thrust bearing to withstand high axial thrust load


• Extremely hardwearing water lubricated bearing


• Easy to dismantle & repair


• Fitted with imported thermal overload protector in single phase motor

Founded in Gujarat(India), the company has garnered wide appreciation for its seamless quality products and client centric approach. Combining our expertise with the technology that we possess, we take the responsibility to deliver utmost quality Openwell Submersible Pump to the customers.

Intro :

C.R.I. Openwell Submersible Pumpsets are Ideally suitable for Openwells or Tanks where a wide fluctuation of water level occur. This work under water and rest at the Bottom of the well or Tank. Hence Suction and Priming problem will not arise. The optimal design of impellers and diffusers enables the best possible hydraulic efficiency. Motor sealing is made by polymers, rings, oil seals and sand guard to avoid ingress of well water / sand into the motor. Pressure equalizing rubber diaphragm is provided to guard the pressure and volume variation of water inside motor. Motor must be filled with clear, cold, drinking water as detailed in our operators manual. Three -phase motor requires an adequate motor protection control panel.

Applications

• Domestic


• Irrigation


• Gardens


• Rural water supply

Features

• No Suction and Priming Problem


• Noiseless Operation


• High Operating efficiency


• Can be easily dismantled and repaired

• 
  
  
  
  • Light weight and easy to install.
  
  
  • Improved hydraulic design with increased efficiency and reduced power consumption.
  
  
  • Noise free operation.
  
  
  • Modular construction and easily interchangeable parts.
  
  
  • Built in NRV with minimum friction.
  
  
  • Radial and mixed flow impeller designs including high head versions in shell type assembly.
  
  
  • Impellers and diffusers of high quality engineering polymer, stainless steel shell corrosion resistance and LTB.
  
  
  
  

  Domestic and Community water supply, water supply to high- rise buildings, housing, complexes,

  
  

  bungalows and industries, irrigation of farms, cattle and poultry farms, dairies, cooling water

  
  

  circulating system, fire fighting system, fountains.

  
  

• Easy installation and low operating cost


• Improve efficiency and minimal maintenance.


• Easy handling with an eye bolt.


• Accurate control on the uniformity in air gap to minimize vibration.


• Low temperature with class A insulation insures long trouble free operation

Irrigator (Flood, Sprinkler, Drip), Drinking water supply, Industrial water supply,

Cooling water circulating.

• Applications

• Domestic water supply


• Pressure boosting


• Irrigation


• Fountains


• Septic effluent pumping


• Water distribution

• 4 performance ranges 35, 45, 60 and 90 gpm


• Stainless steel shaft, shell, intake screen and cableguard


• Stainless steel discharge head and motor bracket


• High flow impellers and stages are glass-filled Noryl * for maximum efficiency


• Ceramic shaft sleeve and rubber discharge bearing eliminates sand wear


• Intermediate bearing for increased shaft stability


• Floating eye and hub seals for improved performance and efficiency


• Stainless steel hex pump shaft, shell and shaft coupling


• High capacity upthrust assembly for protection during start-up and operation (45, 60 and 90 gpm models)


• Powered by Franklin corrosion-resistant submersible motors

Easy installation and low operating cost.

Improved efficiency and minimal maintenance.

Dynamically Balanced rotors and impellers.

Easy Handling with an eye bolt.

Deep groove ball bearings packed with right quantity of special grease

ensure long life.

omestic and community water supply, water supply to housing, Complexes,

bungalows and industries, Irrigation of farms, Cattle and poultry farms, Dairies,

Cooling water Circulating systems, Fountains.

• Water distribution / pressure boosting


• Rainwater collection


• Irrigation / Gardening / Sprinklers


• Dewatering


• Wash down unit


• Fountains


• Other various installations

• Features

• Compact close-coupled design, robust and rust resistant


• Impellers and diffusers are made of stainless steel in order to achieve durability, superior efficiency and the highest performances


• Double mechanical seal separated by an oil* chamber for maximum motor protection


• *In compliance with FDA Food, Drug Administration and the annex to G.U. no. 104 of 20/04/73 for oils in contact with food stuffs


• Plug-in type power cable and level control (floaters) for easy replacement


• Heavy duty over size motor shaft


• Stainless steel water proof capsule to protect the motor


• Motor cooling is guaranteed by the pumped liquid

• Specifications

• Capacities up to 14 m3/hr


• Heads up to 11 Bar


• Discharge outlet 1W Rp


• Maximum working pressure 15 Bar


• Maximum immersion depth 20 m


• Maximum allowable amount of sand 50 gr/m3


• Maximum solids size up to 2 mm


• Liquid temperature range -5C to 40C


• Continuous operation either in vertical or horizontal position


• Motor range: 0, 55kW to 3kW


• Asynchronous, Class F insulation, IP 68 protection


• 20 m of power cable type H07RN F is supplied with the standard version

• 
  

  Material of construction & Engineering Data

  
  

  MOTOR (DOL START)
  2 Pole Induction continues rated motor with squirrel cage rotor.
  Stator insulation class F (155 C)
  Speed: 2800 RPM (Approx)
  Power rating : 1.1 Kw (1 Phase & 3 Phase)
  1.5 Kw (1 Phase & 3 Phase)
  Current : 8 Amps; 2.5 Amps; 11 Amps; 3.8 Amps Respectively
  Maximum Start / stop Per hour : 10

  
  

  POWER SUPPLY :
  415 V, 3 Phase 50 Hz, AC supply.
  230 V, 1 Phase (with Control panel).

  
  

  BALL BEARINGS :
  The rotor shaft is carried in two single row, deep groove ball bearing. The bearings are filled with high temperature

  
  

  grease containing special anti-corrosives additives ensuring no maintenance required for life.

  
  

  POWER CABLE :
  Water proof / oil proof, PVC insulated double sheathed, copper conductor flexible cable of size.
  4 Core 1.5 sq.mm. 15 meter length for model CFDW 150S / 150T.
  4 Core 1.5 sq.mm. 15 meter length for model CFDW 200S / 200T.

  
  

  SHAFT SEAL :
  Oil bath type double Mech-Seal & Oil Seal ensures a longer pump life.

  
  

  CORROSION RESISTANT :
  Outer & Inner stator in SS 304.
  Rotor Shaft SS 410
  Impeller SS 410. Also available in SS 304 (Optional)
  Nitrile rubber Moulded Diffuser.

  
  

  STRAINER :

  
  

  MS epoxy coated with 6mm round holes, also available in SS (Optional).

  
  

  SUBMERGENCE :

  
  

  Submergence below liquid surface min 25mm, max. 10 mtrs.

  
  

Equipped with an automatic reset motor protector/heavy duty bearing High efficient copper wound motor / In-build lip seal to prevent ingress of slit / With / Without float switch.

Draining sewage water from hotels, houses, commercial building, complexes etc. / Pumping waste water in industries /

Pumping sewage water from stock farm and manhole sewage / sewage treatment plant / pumping municipal sewage

water / Septic tank / Leather factories

For years, we are engaged in dealing of Borewell Submersible Pump, as we are its reckoned supplier in the market. Superior transportation facilities, efficient workforce and on-time delivery of the products make us stand out from the crowd.

Detail : C.R.I. 80 mm (3) Borewell Submersible pumpsets is firmly coupled to a submersible electric motor which operates submerged beneath the surface of water. Built-in check valve prevents back flow and reduces the risk of water hammering.

Applications

• Domestic and municipal water supply


• Rural water supply


• Irrigation


• Sprinkler system


• Pressure boosting units and Fire fighting system


• Industrial and mining application


• Fountains


• Ponds and Gardens

PUMPED LIQUIDS

Clean, thin, non-aggressive, non explosive, clear, cold, fresh water without abrasives, solid particles or fiber having the following characteristics.

Features

• Motor portion covered with corrosive resistance Stainless Steel (SS 304) shell


• Floating impeller design prevents blockage


• More longevity and hygiene


• High operating efficiency


• Specially designed thrust bearing to withstand high axial thrust load


• Extremely hardwearing water lubricated bearing


• Easy to dismantle & repair


• Fitted with imported thermal overload protector in single phase motor