Post Buy Requirement
PM
Ahmedabad, Gujarat, India
Add Review

Our Products

Dairy Fittings

DAIRY FITTINGS

Offering stainless steel dairy fittings:

(Dairy fittings)

(Welded ends expanded ends)

Bend, tee, cross, reducer, union, valve, Clamp with ferrule, clamp (pipe holding) With coupling, nipple & base plate



Range : (15 mm) od to 4 (100 mm) thick OD 6 SWG, 14 SWG, 12 SWG



Grade : AISI 304, 316, 316lStandard : SMS, IDF, DIN, ISOFinish : dairy polished, electro polished, 320 grit.User

Stainless Steel Type 202, 304L, 310, 316L, 317L, 321, 347, 904L etc.,

Carbon Steel (Low, Mild, High)

Duplex Stainless Steel Type UNS S31803, S32205 etc.,

Alloy Steel

Inconel Incolloy 600, 601, 800, 825 etc., Monel Series 400, Hastalloy C276

Cupro Nickel 9010, 7030

Industries : Dairy, Breweries, Mineral water, Cosmetics, Chemicals, Distilleries, Food, Soft Drinks, Pharmaceuticals, Process Control and Allied Industries.
View Complete Details

304 Stainless Steel Wire

  • Diameter (Size S.S mm to 32 mm
  • Coil Weight 500 - 1000 kgs
Nails, Pins, Staples, Rivets, Safety Pins, Wedge Screen, Knitting Filters, Sieves, Springs, Bicycle and Umbrella Spokes, Annealed wire for Redrawing, Brushes, Strainers, Scrubbers, Cold Heading Wires, Slings and Chains, Conveyer Belts, Steel Balls and Wall Ties.
View Complete Details

Stainless Steel Bright Bars

Stainless Steel Bright Bars

We are engaged in offering wide range of Stainless Steel Bright Bars, Available in different specification, our range finds usage in various industry applications. These are appreciated for optimum strength, dimensional accuracy and perfect finish.


Stainless Steel Bright Bars

We offer Stainless Steel Bright Bars that are appreciated for dimensional accuracy, high tensile strength and durability. Our range is available in varied specifications to suit the requirement of clients.

Process : We produce Bright Bars by using following process

Annealed, Pickled, Cold Drawn, Centreless Ground & Polished.

Peeled, Straightened, Centreless Ground & Polished.

Features:

High strength
Dimensional accuracy
Corrosion resistance
Chemical resistance
Durable

Quality:

Each Bar is tested for size tolerance, Ovality, length and Roughness.
We issue EN102043.1 Certificate as per ADW0
All required Mechanical and metallurgical tests are carried out at our works.
Each lot is tested and ensured that material is free from Radio active contamination.
Bundles are made of 5001000kgs each packed in HDPE sheets.
Container is fumigated before stuffing. All wooden box blockes are also fumigated.

Specification:
Applicator Petrochemical Plants. Dairy Equipments. Machine Tools. Medical Parts. Oil pipelines Ships. Structural design. Manufacturing tensile springs & cables. Welding purposes. Boilers. Pressure vessel. Liquid storage terminals. Liquid cargo ships, Surgical instrument, Pumps shafts, Valves and fittings, Fasteners.
Grade 201. 202. 303. 304. 304L. 310. 316. 316L. 3;
410. 420. 416. 430. 431. 430F & others
Condition Peeled. Centreles:
Ground & Polish<
Peeled & Polished Peeled. Rough Turned; Forged, Rough Turned
Diameter (Sizi 2,Omm to 100mn
!3/4 to 4 ")
85mm to 140mm
(3-1/4" to 4 --3/4 "
25mm to 140mn
11 "to 5--112 ")
150mm to 400mn
( 6" to 16 " )
Tolerance H7. H8. H9 (Din 671)
ASTM A 484
H11 K121K13
iDin 1013)
-Omm/+3mn
(-0 "/+0.12
Length Upto 7 MTRS Upto 7 MTRS Upto 7 MTRS Upto 7 MTRS









View Complete Details

Forged Round Bars

We are engaged in offering wide range of Stainless Steel, Alloy Steel & Carbon Steel Round Bars for Forging & Bright Bar Industries. These are produced in our Mill for offering quality products. Available in different specification, Our range finds usage in various industry applications. These are appreciated for optimum strength, dimensional accuracy and perfect finish.
View Complete Details

Hexegonal Bars

Hexegonal Bars

Pratik Metals Owing to the expertise of our professionals, we have been able to bring forth Stainless Steel Hex Bars for our clients. These Stainless Steel Hex Bars are available with us in Hexagonal shape. Available in all grades and sizes, our bars are highly appreciated by our clients with the following features:

High strength
Corrosion resistance
Perfect hardness
Durability.
Low maintenance
Application specific design
Dimensional precise
Available in standard and customized option

we ensure that our range meets the international quality standard.

Using premium quality raw material, our gamut of stainless steels hex bars is capacitated to display the features of strength and durability. These bars are available for our clients in different dimensions and specifications.

Bars, Available in different specification, our range finds usage in various industry applications. These are appreciated for optimum strength, dimensional accuracy and perfect finish.

Specification:
Applicator Ball Valves. Needle Valves. Filter Valves. Connectors. Couplings. Plug
Hose Ends. Manifolds. Nuts. Bolts.
Type Cold Drawn E. Polished (Squares Cold Drawn & Polished (Hexagons
Grade 303. 304. 304L, 316. 316L. 41
416. 420. 430. 430F
303. 304, 304L. 316. 316L. 41C
416. 420. 430. 430F
Diameter 5inm to 50min 31/4 " to 2 5inin to 50inm /4" to 2
Tolerance 1111 (ASTM A 484) hll (ASTM A 484)
Length As per requirement Up to 7 tvITRS
with a min, length tol. of -0+/200n-
As per requirement Up to 7 MTRS
with a min, length tol. of -0+/200n-





View Complete Details

Buttweld Fittings

Buttweld Fittings:

Range
15 mm NB upto 1200 mm NB in Schedule 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS

Form
Seamless & Welded Long Radius & Short Radius Elbow 90 deg, Long Radius Elbow 45 deg, Long Radius & Short Radius Elbow 180 deg (Return Bend), Reducing Elbow, Equal Tee, Unequal Tee, Crosses, Concentric Reducer,
Eccentric Reducer, Long Stubend, Short Stubend, Collar, Pipe Cap, Long Radius Bends R = 3D, 5D, 6D, 8D, 10D & 20D in 15 deg, 30 deg, 60 deg & 90 deg and Drawing based Butt Weld Fittings (Customized).

Stainless Steel Buttweld fittings
Grade: 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L , 317, 317L, 321, 347, 347 H, 904L

Duplex Steel Buttweld fittings
Grade: 2205 (UNS No. S31803), 2207 (UNS No. S32760)

Nickel Alloy Buttweld fittings
Grade:
Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201),
Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500),
Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825),
Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625),
Inconel 601 (UNS No. N06601),
Hastelloy C 276 (UNS No. N10276),
Alloy 20 (UNS No. N08020),
Titanium (Grade I & II)

Copper Alloy Buttweld fittings
Grade:
UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500
UNS No. C 70600 (Cu -Ni- 9010), C 71500 (Cu -Ni- 7030)
View Complete Details

Square Bars

Square Bars

Pratik Metals is amongst one of the leading manufacturers and suppliers of square bars. from quality stainless steel, these square bars are abrasion and corrosion resistant. Our square bars adhere to the industrial standards such as ASTM A36, ASTM A572 Gr.50, EN 10025, S275 and S355. These Stainless steel , Carbon steel, Alloy Steel bars are offered in a variety of dimensions, sizes and finishes to cater to the needs of our clients. Further we can customize these steel bars as per the requirement of our clients.

Bars, Available in different specification, our range finds usage in various industry applications. These are appreciated for optimum strength, dimensional accuracy and perfect finish.

Application:
Applicator Ball Valves. Needle Valves. Filter Valves. Connectors. Couplings. Plug
Hose Ends. Manifolds. Nuts. Bolts.
Type Cold Drawn E. Polished (Squares Cold Drawn & Polished (Hexagons
Grade 303. 304. 304L, 316. 316L. 41
416. 420. 430. 430F
303. 304, 304L. 316. 316L. 41C
416. 420. 430. 430F
Diameter 5inm to 50min 31/4 " to 2 5inin to 50inm /4" to 2
Tolerance 1111 (ASTM A 484) hll (ASTM A 484)
Length As per requirement Up to 7 tvITRS
with a min, length tol. of -0+/200n-
As per requirement Up to 7 MTRS
with a min, length tol. of -0+/200n-





View Complete Details

Stainless Steel Angle

ANGLE , CHANNEL & FLAT

Stainless Steel Angle

Stainless Steel Channel

Stainless Steel Flat

Non Ferrous Metal Flats

  Stainless Steel Angle
1 Material : Stainless Steel
2 Grade : 202, 304, 304L, 316, 316L, 317L, 321, 316 Ti, 309, 310, 904L, 410, 420, 430, 431, etc.
3 Standard : ASTM / ASME A/SA 240
4 Form : Roll-formed metal
5 Angle : Varied, most commonly 90 degree
6 Leg : Two of same length
7 Size : 3 / 4/5 / 6 x 25 x 25, 3 / 4/5 / 6 x 30 x 30
3 / 4/5 / 6/7 x 40 x 40, 4 / 5/6 / 7 x 50 x 50
4 / 5/6 / 7/8 x 60 x 60, 5 / 6/7 / 8/9 x 70 x 70
6 / 7/8 / 9/10 x 75 x 75, 6 / 7/8 / 9/10 / 11 / 12 x 80 x 80
7 / 8/9 / 10 / 11 / 12 x 100 x 100
    Stainless Steel Channel
     
1 Material : Stainless Steel
2 Grade : 202, 304, 304L, 316, 316L, 317L, 321, 
316 Ti, 309, 310, 904L, 410, 420, 430,
431, etc.
3 Standard : ASTM / ASME A/SA 240
4 Size : 40/150/175/200/X75,100X50,125X65,
250X80,300X90,400X100,
150X150X10/12/16/20

 

 

Stainless Steel Flat
1 Grade : 202, 304, 304L, 316, 316L, 317L, 321, 316 Ti, 309, 310, 904L,410, 420, 430, 431, etc.
2 Standard : ASTM / ASM
   
Non Ferrous Metal Flats
 
     
1 Material : Copper,Brass,Aluminium,Phosphorus, Bronze,Gun Metal, Lead, Zinc,Duplex & Special Alloy
2 Grade : Bi-Metals, White Metal, Antimony, Tin, Zinc Anodes, etc
  Alloy Steel Flates
1 Material : Steel, Boiler Plate, Mild Steel, G.I. Steel ,M.S.
2 Grade : CRCA, Spring Steel, Silver Steel, Carbon Steel A-387 Gr. 11, G










View Complete Details

Industrial Flanges

INDUSTRIAL FLANGES

Range
15 NB upto 600 NB in 150 LBS , 300 LBS, 400 LBS , 600 LBS , 900 LBS , 1500 LBS , 2500 LBS Table 2.5 , Table 6 ,


Table 10, Table 16, Table 25, Table 40, Table 64, Table 160, Table 320, Table 400

SIZE RANGE :15 NB UP TO 600 NB IN 150 LBS , 300 LBS, 400 LBS , 600 LBS , 900 LBS , 1500 LBS , 2500 LBS TABLE 2.5 , TABLE 6 , TABLE 10, TABLE 16, TABLE 25 , TABLE 40, TABLE 64, TABLE 160, TABLE 320, TABLE 400



FORM ( Table ) : SLIP ON, SOCKET WELD, BLIND, LAPPED, SCREWED, WELD NECK, REDUCING, SPECTACLE, SLIP ON BOSS, PLATE, PLATE BLANK, SCREWED BOSS.

Stainless Steel :

ASTM ASME SA 182 F 304, 304L, 304H, 309H, 310H, 316, 316H, 316L, 316 LN, 317, 317L, 321, 321H, 347, 347 H.

Duplex Steel :

ASTM ASME SA 182 F 44 , F 45 , F51 , F 53 , F 55 , F 60 , F 61.

Carbon Steel :

ASTM ASME A 105.
ASTM ASME A 350 LF 2

Alloy Steel :

ASTM ASME A 182 GR F 5, F 9 , F 11 , F 12 , F 22 , F 91.

Nickel Alloy :

ASTM ASME SB 564 UNS 2200 ( NICKEL 200 ) , UNS 4400 (MONEL 400 ) , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS ( 6601 INCONEL 601 ) , UNS 6625 (INCONEL 625) , UNS 10276 ( HASTELLOY C 276 ) ASTM ASME SB 160 UNS 2201 (NICKEL 201 )
ASTM ASME SB 472 UNS 8020 ( ALLOY 20 20 CB 3 )
View Complete Details

Tube Fittings

  • M.O.C: SS304, SS316, Brass.1/8” to 1” OD (Suitable for Tube End) 4mm to 25mm OD (Suitable for Tube End)
  • Sizes 4mm to 25mm OD (Suitable for Tube End)
  • End Connections: NPT / BSP / BSPT / UNF
  • Rating: 1500, 3000, 6000, PSI.
  • Carbon Steel High pressure hydraulic applications.
  • Brass Pneumatic, high pressure water and steam lines.
  • Maximum Working Pressure 6000 PSI (400 bar) in Carbon Steel 4000 PSI (300 bar) in Brass
TUBE FITTINGS

Pratik Metals offers Single Ferrule, Double Ferrule type Male Female Connectors, Unions, Bulk Head Unions, Cross, Elbow, Tee, Tube Plug and Tube Cap in various sizes.

Grades

Stainless Steel Type 202, 304L, 310, 316L, 317L, 321, 347, 904L etc.,

Carbon Steel (Low, Mild, High)

Duplex Stainless Steel Type UNS S31803, S32205 etc.,

Alloy Steel

Inconel Incolloy 600, 601, 800, 825 etc., Monel Series 400, Hastalloy C276

Cupro Nickel 9010, 7030

Pratik Metal has designed a range of heavy duty tube fittings in a variety of materials to provide secure zero leak joints on thin or thick wall tubes. Available in Metric outside diameters ranging from 6 to 50 mm. Series of ferrule design include single or twin ferrule in stainless steel, olive shaped single ferrule or twin ferrule in brass and single ferrule bite or progressive type in carbon steel.

Use :Bronze : Long life protection against sea water corrosion and hostile marine environment.
View Complete Details

Forged Fittings

FORGED FITTINGS

Range
15 mm NB upto 100 mm NB in 2000 LBS, 3000 LBS, 6000 LBS & 9000 LBS, 150 LBS, 250 LBS.

Form
Socket Weld Fittings: Elbow 90 deg, Elbow 45 deg, Cross, Tee, Coupling, Half Coupling & Cap.

Stainless Steel Forged Fittings
Grade: 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L , 317, 317L, 321, 347, 347 H, 904L

Duplex Steel Forged Fittings
Grade: 2205 (UNS No. S31803), 2207 (UNS No. S32760)

Nickel Alloy Forged Fittings
Grade:
Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201),
Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500),
Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825),
Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625),
Inconel 601 (UNS No. N06601),
Hastelloy C 276 (UNS No. N10276),
Alloy 20 (UNS No. N08020),
Titanium (Grade I & II)

Copper Alloy Forged Fittings
Grade:
UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500
UNS No. C 70600 (Cu -Ni- 9010), C 71500 (Cu -Ni- 7030
View Complete Details

Black Round Bars

Black Round Bars

We are engaged in offering wide range of Stainless Steel, Alloy Steel & Carbon Steel Round Bars for Forging & Bright Bar Industries

Specification:
Applicator Machined Components. Pump Shafts. Valves. Fasteners. Machine Tools. Dairy Equipments. Surgical & Medical
Threaded Bars. Studs. Bolts. Pins. Hinges and Handles.
Condition Annealed. Solution Annealed and Pickled. Quenched & Tempered. Hardened & Temper
Grade 201a. 201b. 201c. 202. 204Cu. 303. 303Cu. 303F. 304. 304Cu. 304
310. 316. 316L.321.410. 420. 416. 430. 431. 430F & others
Diameter (Size) 5.5 mm to 22mr 25.00mm to 90.00mm & 95.00mm to 150.00n
Tolerance +1- 100% of the siz +/- 125% of the size - 25.00 to 95.00 mr
+/- 1.50 % of the size - 95.00 to 150.00 rr
Length Wire rod form or annealed straighten As per requirement Upto 7 mtrs with a m
length tol, of -0+1200mm




View Complete Details

Threaded Bars

  • Length 2/3/4 meter(6/12ft )
  • Condition Cold Drawn, Threading
  • Grades 304, 304L, 316, 316L
  • Diameter (Size) M8 to M40 (5/16 ” to 1--1/2 ”)
  • Threading Method Thread Rolling
  • Threading Condition Fully Threaded
  • Thread Type ANSI B1.1 Class 2A Fit
  • Length Tolerance -0 /+50 mm (-0 ”/+2 ” )
THREADED BARS

We are the manufacturer and exporter of Threaded Bars. The entire range of our threaded bars is manufactured from high quality metal in order to ensure a high tensile effect. Our range of threaded bars is also known for its corrosion resistance and dimensional accuracy.

Applications :

Ground Anchors, Resin Anchors, Rock Bolts, Tie Bars, Roof and Hanger Bolts.

Bars, Available in different specification, our range finds usage in various industry applications. These are appreciated for optimum strength, dimensional accuracy and perfect finish.
View Complete Details

Stainless Steel Duplex Steel Round Bars

Stainless Steel Duplex Steel Round Bars

We export Stainless Steel Duplex Steel Round Bars that are acknowledged for high tensile strength and durability. Available in various specifications, our range finds application varied industry applications.


Features:

Durable
High strength
Chemical resistance
Dimensional accuracy
Corrosion resistance
Superior finish

Specifications:

-Carbon Steel:

ASTM ASME A 105, En8D, En9, C70 , CK45, C 65 etc.

-Alloy Steel:
ASTM ASME A 182 GR F 5, F 9, F 11, F 12, F 22, F 91,
ASTM ASME A 729 GR B 11 & B 22
SAE8620, 4140, 20MnCr5, 16MnCr5, En353, En24 etc.

-Stainless Steel:

201, 202
AISI 304, 304L , 303, 309, 310, 316, 316L, 317L, 321, 329, 330, 347 etc.
DIN 1.4362, 1.4404, 1.4301, 1.4307, 1.4571, 1.4541 etc.

-Super Duplex Steel:

F51, F52, F53, F60 , 2205.
View Complete Details

Hardened & Tempered Round Bars

Hardened & Tempered Round Bars

Our Hardened & Tempered Round Bars are available different sizes and specifications to meet the requirements of clients.

Features:

Chemical resistance
Dimensional accuracy
Durable
High strength
Corrosion resistance
Perfect finish

Specifications:

ASTM A 193 B7, B7M, B16

Hardened and Tempered Steel Round Bars

Quenching and Tempered Steel Round Bars

Characteristics:

-Alloy-steel and stainless steel bolting materials for high-temperature service, of pressure vessels, valves, flanges, and fittings for high temperature service.

-The bars are to be processed by cold drawing or centerless grinding; austenitic stainless steel bars are to be processed solution- annealed and strain-hardened

-Also Quenched and Tempered or Normalized and tempered ferrite materials that is subsequently cold drawn for dimensional control shall be stress relived after cold drawing.
View Complete Details

Ss Welded Tube

  • Usage Industries
  • Size 2 inch, 3 inch, 1 inch, 3/4 inch
  • 2 inch, 3 inch, 1 inch, 3/4 inch 3 meter, 6 meter
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Dinesh C Sanghvi (Pratik Metals)
  • 3.gautam Estate,Rahkial, Rakhial, Ahmedabad, Gujarat - 380023, India
  • Share us via
Hexegonal Bars Retailer from Ahmedabad, Gujarat
Post Buy Requirement
PM
Ahmedabad, Gujarat, India
Add Review

Our Products

Dairy Fittings

DAIRY FITTINGS

Offering stainless steel dairy fittings:

(Dairy fittings)

(Welded ends expanded ends)

Bend, tee, cross, reducer, union, valve, Clamp with ferrule, clamp (pipe holding) With coupling, nipple & base plate



Range : (15 mm) od to 4 (100 mm) thick OD 6 SWG, 14 SWG, 12 SWG



Grade : AISI 304, 316, 316lStandard : SMS, IDF, DIN, ISOFinish : dairy polished, electro polished, 320 grit.User

Stainless Steel Type 202, 304L, 310, 316L, 317L, 321, 347, 904L etc.,

Carbon Steel (Low, Mild, High)

Duplex Stainless Steel Type UNS S31803, S32205 etc.,

Alloy Steel

Inconel Incolloy 600, 601, 800, 825 etc., Monel Series 400, Hastalloy C276

Cupro Nickel 9010, 7030

Industries : Dairy, Breweries, Mineral water, Cosmetics, Chemicals, Distilleries, Food, Soft Drinks, Pharmaceuticals, Process Control and Allied Industries.
View Complete Details

304 Stainless Steel Wire

  • Diameter (Size S.S mm to 32 mm
  • Coil Weight 500 - 1000 kgs
Nails, Pins, Staples, Rivets, Safety Pins, Wedge Screen, Knitting Filters, Sieves, Springs, Bicycle and Umbrella Spokes, Annealed wire for Redrawing, Brushes, Strainers, Scrubbers, Cold Heading Wires, Slings and Chains, Conveyer Belts, Steel Balls and Wall Ties.
View Complete Details

Stainless Steel Bright Bars

Stainless Steel Bright Bars

We are engaged in offering wide range of Stainless Steel Bright Bars, Available in different specification, our range finds usage in various industry applications. These are appreciated for optimum strength, dimensional accuracy and perfect finish.


Stainless Steel Bright Bars

We offer Stainless Steel Bright Bars that are appreciated for dimensional accuracy, high tensile strength and durability. Our range is available in varied specifications to suit the requirement of clients.

Process : We produce Bright Bars by using following process

Annealed, Pickled, Cold Drawn, Centreless Ground & Polished.

Peeled, Straightened, Centreless Ground & Polished.

Features:

High strength
Dimensional accuracy
Corrosion resistance
Chemical resistance
Durable

Quality:

Each Bar is tested for size tolerance, Ovality, length and Roughness.
We issue EN102043.1 Certificate as per ADW0
All required Mechanical and metallurgical tests are carried out at our works.
Each lot is tested and ensured that material is free from Radio active contamination.
Bundles are made of 5001000kgs each packed in HDPE sheets.
Container is fumigated before stuffing. All wooden box blockes are also fumigated.

Specification:
Applicator Petrochemical Plants. Dairy Equipments. Machine Tools. Medical Parts. Oil pipelines Ships. Structural design. Manufacturing tensile springs & cables. Welding purposes. Boilers. Pressure vessel. Liquid storage terminals. Liquid cargo ships, Surgical instrument, Pumps shafts, Valves and fittings, Fasteners.
Grade 201. 202. 303. 304. 304L. 310. 316. 316L. 3;
410. 420. 416. 430. 431. 430F & others
Condition Peeled. Centreles:
Ground & Polish<
Peeled & Polished Peeled. Rough Turned; Forged, Rough Turned
Diameter (Sizi 2,Omm to 100mn
!3/4 to 4 ")
85mm to 140mm
(3-1/4" to 4 --3/4 "
25mm to 140mn
11 "to 5--112 ")
150mm to 400mn
( 6" to 16 " )
Tolerance H7. H8. H9 (Din 671)
ASTM A 484
H11 K121K13
iDin 1013)
-Omm/+3mn
(-0 "/+0.12
Length Upto 7 MTRS Upto 7 MTRS Upto 7 MTRS Upto 7 MTRS









View Complete Details

Forged Round Bars

We are engaged in offering wide range of Stainless Steel, Alloy Steel & Carbon Steel Round Bars for Forging & Bright Bar Industries. These are produced in our Mill for offering quality products. Available in different specification, Our range finds usage in various industry applications. These are appreciated for optimum strength, dimensional accuracy and perfect finish.
View Complete Details

Hexegonal Bars

Hexegonal Bars

Pratik Metals Owing to the expertise of our professionals, we have been able to bring forth Stainless Steel Hex Bars for our clients. These Stainless Steel Hex Bars are available with us in Hexagonal shape. Available in all grades and sizes, our bars are highly appreciated by our clients with the following features:

High strength
Corrosion resistance
Perfect hardness
Durability.
Low maintenance
Application specific design
Dimensional precise
Available in standard and customized option

we ensure that our range meets the international quality standard.

Using premium quality raw material, our gamut of stainless steels hex bars is capacitated to display the features of strength and durability. These bars are available for our clients in different dimensions and specifications.

Bars, Available in different specification, our range finds usage in various industry applications. These are appreciated for optimum strength, dimensional accuracy and perfect finish.

Specification:
Applicator Ball Valves. Needle Valves. Filter Valves. Connectors. Couplings. Plug
Hose Ends. Manifolds. Nuts. Bolts.
Type Cold Drawn E. Polished (Squares Cold Drawn & Polished (Hexagons
Grade 303. 304. 304L, 316. 316L. 41
416. 420. 430. 430F
303. 304, 304L. 316. 316L. 41C
416. 420. 430. 430F
Diameter 5inm to 50min 31/4 " to 2 5inin to 50inm /4" to 2
Tolerance 1111 (ASTM A 484) hll (ASTM A 484)
Length As per requirement Up to 7 tvITRS
with a min, length tol. of -0+/200n-
As per requirement Up to 7 MTRS
with a min, length tol. of -0+/200n-





View Complete Details

Buttweld Fittings

Buttweld Fittings:

Range
15 mm NB upto 1200 mm NB in Schedule 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS

Form
Seamless & Welded Long Radius & Short Radius Elbow 90 deg, Long Radius Elbow 45 deg, Long Radius & Short Radius Elbow 180 deg (Return Bend), Reducing Elbow, Equal Tee, Unequal Tee, Crosses, Concentric Reducer,
Eccentric Reducer, Long Stubend, Short Stubend, Collar, Pipe Cap, Long Radius Bends R = 3D, 5D, 6D, 8D, 10D & 20D in 15 deg, 30 deg, 60 deg & 90 deg and Drawing based Butt Weld Fittings (Customized).

Stainless Steel Buttweld fittings
Grade: 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L , 317, 317L, 321, 347, 347 H, 904L

Duplex Steel Buttweld fittings
Grade: 2205 (UNS No. S31803), 2207 (UNS No. S32760)

Nickel Alloy Buttweld fittings
Grade:
Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201),
Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500),
Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825),
Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625),
Inconel 601 (UNS No. N06601),
Hastelloy C 276 (UNS No. N10276),
Alloy 20 (UNS No. N08020),
Titanium (Grade I & II)

Copper Alloy Buttweld fittings
Grade:
UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500
UNS No. C 70600 (Cu -Ni- 9010), C 71500 (Cu -Ni- 7030)
View Complete Details

Square Bars

Square Bars

Pratik Metals is amongst one of the leading manufacturers and suppliers of square bars. from quality stainless steel, these square bars are abrasion and corrosion resistant. Our square bars adhere to the industrial standards such as ASTM A36, ASTM A572 Gr.50, EN 10025, S275 and S355. These Stainless steel , Carbon steel, Alloy Steel bars are offered in a variety of dimensions, sizes and finishes to cater to the needs of our clients. Further we can customize these steel bars as per the requirement of our clients.

Bars, Available in different specification, our range finds usage in various industry applications. These are appreciated for optimum strength, dimensional accuracy and perfect finish.

Application:
Applicator Ball Valves. Needle Valves. Filter Valves. Connectors. Couplings. Plug
Hose Ends. Manifolds. Nuts. Bolts.
Type Cold Drawn E. Polished (Squares Cold Drawn & Polished (Hexagons
Grade 303. 304. 304L, 316. 316L. 41
416. 420. 430. 430F
303. 304, 304L. 316. 316L. 41C
416. 420. 430. 430F
Diameter 5inm to 50min 31/4 " to 2 5inin to 50inm /4" to 2
Tolerance 1111 (ASTM A 484) hll (ASTM A 484)
Length As per requirement Up to 7 tvITRS
with a min, length tol. of -0+/200n-
As per requirement Up to 7 MTRS
with a min, length tol. of -0+/200n-





View Complete Details

Stainless Steel Angle

ANGLE , CHANNEL & FLAT

Stainless Steel Angle

Stainless Steel Channel

Stainless Steel Flat

Non Ferrous Metal Flats

  Stainless Steel Angle
1 Material : Stainless Steel
2 Grade : 202, 304, 304L, 316, 316L, 317L, 321, 316 Ti, 309, 310, 904L, 410, 420, 430, 431, etc.
3 Standard : ASTM / ASME A/SA 240
4 Form : Roll-formed metal
5 Angle : Varied, most commonly 90 degree
6 Leg : Two of same length
7 Size : 3 / 4/5 / 6 x 25 x 25, 3 / 4/5 / 6 x 30 x 30
3 / 4/5 / 6/7 x 40 x 40, 4 / 5/6 / 7 x 50 x 50
4 / 5/6 / 7/8 x 60 x 60, 5 / 6/7 / 8/9 x 70 x 70
6 / 7/8 / 9/10 x 75 x 75, 6 / 7/8 / 9/10 / 11 / 12 x 80 x 80
7 / 8/9 / 10 / 11 / 12 x 100 x 100
    Stainless Steel Channel
     
1 Material : Stainless Steel
2 Grade : 202, 304, 304L, 316, 316L, 317L, 321, 
316 Ti, 309, 310, 904L, 410, 420, 430,
431, etc.
3 Standard : ASTM / ASME A/SA 240
4 Size : 40/150/175/200/X75,100X50,125X65,
250X80,300X90,400X100,
150X150X10/12/16/20

 

 

Stainless Steel Flat
1 Grade : 202, 304, 304L, 316, 316L, 317L, 321, 316 Ti, 309, 310, 904L,410, 420, 430, 431, etc.
2 Standard : ASTM / ASM
   
Non Ferrous Metal Flats
 
     
1 Material : Copper,Brass,Aluminium,Phosphorus, Bronze,Gun Metal, Lead, Zinc,Duplex & Special Alloy
2 Grade : Bi-Metals, White Metal, Antimony, Tin, Zinc Anodes, etc
  Alloy Steel Flates
1 Material : Steel, Boiler Plate, Mild Steel, G.I. Steel ,M.S.
2 Grade : CRCA, Spring Steel, Silver Steel, Carbon Steel A-387 Gr. 11, G










View Complete Details

Industrial Flanges

INDUSTRIAL FLANGES

Range
15 NB upto 600 NB in 150 LBS , 300 LBS, 400 LBS , 600 LBS , 900 LBS , 1500 LBS , 2500 LBS Table 2.5 , Table 6 ,


Table 10, Table 16, Table 25, Table 40, Table 64, Table 160, Table 320, Table 400

SIZE RANGE :15 NB UP TO 600 NB IN 150 LBS , 300 LBS, 400 LBS , 600 LBS , 900 LBS , 1500 LBS , 2500 LBS TABLE 2.5 , TABLE 6 , TABLE 10, TABLE 16, TABLE 25 , TABLE 40, TABLE 64, TABLE 160, TABLE 320, TABLE 400



FORM ( Table ) : SLIP ON, SOCKET WELD, BLIND, LAPPED, SCREWED, WELD NECK, REDUCING, SPECTACLE, SLIP ON BOSS, PLATE, PLATE BLANK, SCREWED BOSS.

Stainless Steel :

ASTM ASME SA 182 F 304, 304L, 304H, 309H, 310H, 316, 316H, 316L, 316 LN, 317, 317L, 321, 321H, 347, 347 H.

Duplex Steel :

ASTM ASME SA 182 F 44 , F 45 , F51 , F 53 , F 55 , F 60 , F 61.

Carbon Steel :

ASTM ASME A 105.
ASTM ASME A 350 LF 2

Alloy Steel :

ASTM ASME A 182 GR F 5, F 9 , F 11 , F 12 , F 22 , F 91.

Nickel Alloy :

ASTM ASME SB 564 UNS 2200 ( NICKEL 200 ) , UNS 4400 (MONEL 400 ) , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS ( 6601 INCONEL 601 ) , UNS 6625 (INCONEL 625) , UNS 10276 ( HASTELLOY C 276 ) ASTM ASME SB 160 UNS 2201 (NICKEL 201 )
ASTM ASME SB 472 UNS 8020 ( ALLOY 20 20 CB 3 )
View Complete Details

Tube Fittings

  • M.O.C: SS304, SS316, Brass.1/8” to 1” OD (Suitable for Tube End) 4mm to 25mm OD (Suitable for Tube End)
  • Sizes 4mm to 25mm OD (Suitable for Tube End)
  • End Connections: NPT / BSP / BSPT / UNF
  • Rating: 1500, 3000, 6000, PSI.
  • Carbon Steel High pressure hydraulic applications.
  • Brass Pneumatic, high pressure water and steam lines.
  • Maximum Working Pressure 6000 PSI (400 bar) in Carbon Steel 4000 PSI (300 bar) in Brass
TUBE FITTINGS

Pratik Metals offers Single Ferrule, Double Ferrule type Male Female Connectors, Unions, Bulk Head Unions, Cross, Elbow, Tee, Tube Plug and Tube Cap in various sizes.

Grades

Stainless Steel Type 202, 304L, 310, 316L, 317L, 321, 347, 904L etc.,

Carbon Steel (Low, Mild, High)

Duplex Stainless Steel Type UNS S31803, S32205 etc.,

Alloy Steel

Inconel Incolloy 600, 601, 800, 825 etc., Monel Series 400, Hastalloy C276

Cupro Nickel 9010, 7030

Pratik Metal has designed a range of heavy duty tube fittings in a variety of materials to provide secure zero leak joints on thin or thick wall tubes. Available in Metric outside diameters ranging from 6 to 50 mm. Series of ferrule design include single or twin ferrule in stainless steel, olive shaped single ferrule or twin ferrule in brass and single ferrule bite or progressive type in carbon steel.

Use :Bronze : Long life protection against sea water corrosion and hostile marine environment.
View Complete Details

Forged Fittings

FORGED FITTINGS

Range
15 mm NB upto 100 mm NB in 2000 LBS, 3000 LBS, 6000 LBS & 9000 LBS, 150 LBS, 250 LBS.

Form
Socket Weld Fittings: Elbow 90 deg, Elbow 45 deg, Cross, Tee, Coupling, Half Coupling & Cap.

Stainless Steel Forged Fittings
Grade: 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L , 317, 317L, 321, 347, 347 H, 904L

Duplex Steel Forged Fittings
Grade: 2205 (UNS No. S31803), 2207 (UNS No. S32760)

Nickel Alloy Forged Fittings
Grade:
Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201),
Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500),
Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825),
Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625),
Inconel 601 (UNS No. N06601),
Hastelloy C 276 (UNS No. N10276),
Alloy 20 (UNS No. N08020),
Titanium (Grade I & II)

Copper Alloy Forged Fittings
Grade:
UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500
UNS No. C 70600 (Cu -Ni- 9010), C 71500 (Cu -Ni- 7030
View Complete Details

Black Round Bars

Black Round Bars

We are engaged in offering wide range of Stainless Steel, Alloy Steel & Carbon Steel Round Bars for Forging & Bright Bar Industries

Specification:
Applicator Machined Components. Pump Shafts. Valves. Fasteners. Machine Tools. Dairy Equipments. Surgical & Medical
Threaded Bars. Studs. Bolts. Pins. Hinges and Handles.
Condition Annealed. Solution Annealed and Pickled. Quenched & Tempered. Hardened & Temper
Grade 201a. 201b. 201c. 202. 204Cu. 303. 303Cu. 303F. 304. 304Cu. 304
310. 316. 316L.321.410. 420. 416. 430. 431. 430F & others
Diameter (Size) 5.5 mm to 22mr 25.00mm to 90.00mm & 95.00mm to 150.00n
Tolerance +1- 100% of the siz +/- 125% of the size - 25.00 to 95.00 mr
+/- 1.50 % of the size - 95.00 to 150.00 rr
Length Wire rod form or annealed straighten As per requirement Upto 7 mtrs with a m
length tol, of -0+1200mm




View Complete Details

Threaded Bars

  • Length 2/3/4 meter(6/12ft )
  • Condition Cold Drawn, Threading
  • Grades 304, 304L, 316, 316L
  • Diameter (Size) M8 to M40 (5/16 ” to 1--1/2 ”)
  • Threading Method Thread Rolling
  • Threading Condition Fully Threaded
  • Thread Type ANSI B1.1 Class 2A Fit
  • Length Tolerance -0 /+50 mm (-0 ”/+2 ” )
THREADED BARS

We are the manufacturer and exporter of Threaded Bars. The entire range of our threaded bars is manufactured from high quality metal in order to ensure a high tensile effect. Our range of threaded bars is also known for its corrosion resistance and dimensional accuracy.

Applications :

Ground Anchors, Resin Anchors, Rock Bolts, Tie Bars, Roof and Hanger Bolts.

Bars, Available in different specification, our range finds usage in various industry applications. These are appreciated for optimum strength, dimensional accuracy and perfect finish.
View Complete Details

Stainless Steel Duplex Steel Round Bars

Stainless Steel Duplex Steel Round Bars

We export Stainless Steel Duplex Steel Round Bars that are acknowledged for high tensile strength and durability. Available in various specifications, our range finds application varied industry applications.


Features:

Durable
High strength
Chemical resistance
Dimensional accuracy
Corrosion resistance
Superior finish

Specifications:

-Carbon Steel:

ASTM ASME A 105, En8D, En9, C70 , CK45, C 65 etc.

-Alloy Steel:
ASTM ASME A 182 GR F 5, F 9, F 11, F 12, F 22, F 91,
ASTM ASME A 729 GR B 11 & B 22
SAE8620, 4140, 20MnCr5, 16MnCr5, En353, En24 etc.

-Stainless Steel:

201, 202
AISI 304, 304L , 303, 309, 310, 316, 316L, 317L, 321, 329, 330, 347 etc.
DIN 1.4362, 1.4404, 1.4301, 1.4307, 1.4571, 1.4541 etc.

-Super Duplex Steel:

F51, F52, F53, F60 , 2205.
View Complete Details

Hardened & Tempered Round Bars

Hardened & Tempered Round Bars

Our Hardened & Tempered Round Bars are available different sizes and specifications to meet the requirements of clients.

Features:

Chemical resistance
Dimensional accuracy
Durable
High strength
Corrosion resistance
Perfect finish

Specifications:

ASTM A 193 B7, B7M, B16

Hardened and Tempered Steel Round Bars

Quenching and Tempered Steel Round Bars

Characteristics:

-Alloy-steel and stainless steel bolting materials for high-temperature service, of pressure vessels, valves, flanges, and fittings for high temperature service.

-The bars are to be processed by cold drawing or centerless grinding; austenitic stainless steel bars are to be processed solution- annealed and strain-hardened

-Also Quenched and Tempered or Normalized and tempered ferrite materials that is subsequently cold drawn for dimensional control shall be stress relived after cold drawing.
View Complete Details

Ss Welded Tube

  • Usage Industries
  • Size 2 inch, 3 inch, 1 inch, 3/4 inch
  • 2 inch, 3 inch, 1 inch, 3/4 inch 3 meter, 6 meter
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Dinesh C Sanghvi (Pratik Metals)
  • 3.gautam Estate,Rahkial, Rakhial, Ahmedabad, Gujarat - 380023, India
  • Share us via