Clutch Release Bearings, Needle Roller Bearings, King Pin Bearings, DAC-Wheel Bearings and Gear Box Bearings are the main parts of automobile sector.

ZNL Offerings: Single row deep groove ball bearings: 6800, 6900, 16000, 6000, 6200, 6300, 6400, 62000, 62300, 63000, 61800, 61900, 6200, 6300 - Also in EMQ [Electric Motor Quality] Double row deep groove ball bearings: 4200, 4300 with Z, 2Z shield and with Rubber seal RS, 2RS snap ring groove and snap ring For radial clearance C2, CN, C3, C4, C5 As per ISO grade P0 ABEC1 And as per ISO Grade P6A BEC3 Cage type riveted of steel and brass steel, machined brass cage, polyimide. Dimension as per ISO standard, DIN standard and ISI standard. RLS, RMS, XLJ Available

Suitable for High stiffness application Carrying combined load Accommodating pure axial load or pure radial load Impact load carrying capacity Types of Taper Roller bearings: Single row tapper roller bearings (also with seal on one side) Paired single row tapper roller bearings Double row tapper roller bearings Four row tapper roller bearings

ZNL Offerings: 202XX, 203XX, 213XX, 222XX, 223XX, 230XX, 231XX, 232XX 240XX and 241XX Available in cylindrical and taper bore Available in steel and brass cage

Suitable for Constraint Space between housing and shaft Carry high radial load Low and Medium speed Drawn Cup Needle Roller Bearing Caged Type - HK SCE SCH, BK BCE BCH, HK..RS, HK..2RS, BK..RS Needle Roller Bearings With Ribs-NK, NKS, RNA49, RNA48, NKI, NKIS, NA49, NA48, RNA69, NA69, RNA49..RS, RNA49..2RS, NA49..RS, NA49..2RS Without Ribs-RNAO, NAO Inner Ring-IR, LR Full Complement -RNAV, NAV Aligning-RPNA, PNA

ZNL Offerings: 511XX, 512XX, 513XX DLJT, DMJT, (Inch & mm) Also available in Steel and Brass cage.

ZNL Offerings: 202XX, 203XX, 213XX, 222XX, 223XX, 230XX, 231XX, 232XX 240XX and 241XX Available in cylindrical and taper bore Available in steel and brass cage

This bearing contains solid outer ring, split inner ring and ball and cage assembly. Two-piece inner rings allow large complement of ball to accommodate. These bearings are not suitable for miss alignment in housing or shaft deflection. Also these bearings are not sealed.

Suitable for High stiffness application Carrying combined load Accommodating pure axial load or pure radial load Impact load carrying capacity Types of Taper Roller bearings: Single row tapper roller bearings (also with seal on one side) Paired single row tapper roller bearings Double row tapper roller bearings Four row tapper roller bearings

Suitable for Carry heavy radial load at high-speed application Compact space Carry axial displacement Non-bearing location installation Types of Cylindrical Roller Bearings: NU Design - Outer ring has two integral flanges, while inner ring had no flange. N Design - Inner ring has two integral flanges while outer ring has no flange. NJ Design - Outer ring has two integral flanges and inner ring has one integral flange. NUP Design - Outer ring has two integral flanges and inner ring had one integral flange & loose flange ring for both side axial locations

Suitable for Constraint Space between housing and shaft Carry high radial load Low and Medium speed Drawn Cup Needle Roller Bearing Caged Type - HK SCE SCH, BK BCE BCH, HK..RS, HK..2RS, BK..RS Needle Roller Bearings With Ribs-NK, NKS, RNA49, RNA48, NKI, NKIS, NA49, NA48, RNA69, NA69, RNA49..RS, RNA49..2RS, NA49..RS, NA49..2RS Without Ribs-RNAO, NAO Inner Ring-IR, LR Full Complement -RNAV, NAV Aligning-RPNA, PNA

Suitable for In spherical roller thrust bearings the load is transmitted from one raceway to other at an angle to the bearing axis. The bearings are therefore suitable for the accommodation of radial loads. Another important characteristic of spherical roller thrust bearings is their self-aligning capability. This makes the bearings insensitive to shaft deflection and misalignment of the shaft relative to the housing.