ELECTRIC ACTUATOR 0-90 DEGREE #944558

Pneutork series electric actuator is used for controlling 0°-270° rotation of the valves and other similar products, such as butterfly valve, ball valve, damper, flapper valve, plug valve, louver valve and so on. It widely applies to petroleum, chemical, water treatment, shipping, paper making, power plant, heating, light industry and other industries. It can be driven by 380V/220V/110V AC power or 24V/110V DC power, inputs 4-20mA current signal or 0-10V DC voltage signal as control signal. It moves the valve to the right position, and achieves automatic control, its maximum output torque is 2000N·M. (CE certificate approved).

INPUT CURRENT : 24V - 230V - 110V - 380V - 415V

INPUT SIGNAL : 0-10V, 4-20mA

Performance Feature

1. Actuator body —The body is made of hard aluminum alloy with anodize treatment and polyester powder coating. It is highly corrosion-resistant and waterproof level is IP67. IP68 is optional.

2. Motor —Fully enclosed squirrel-cage motor with small size, large torque, small inertia force and F class insulation rating. Internal hot protection switch avoids damaging of the motor.

3. Manual Structure —The design of spanner is safe, reliable, labor-saving and small. When the actuator is not energized, it can be operated by handle. When you don t need manual operation, put the spanner in the slot on back side of the actuator.

4. Position Indicator - Installed in the center axis for observing position of valve. To avoid ponding and observe conveniently, it is designed by convex lens.

5. Seal — It has good seal performance. And its protection class is IP67, also IP68 is optional.

6. Limit Switch—Mechanical and electronic double limit. Mechanical limit screw is adjustable, safe and reliable.

Electronic limit switch is controlled by the cam. Position of limit switch can be set accurately and conveniently by simple adjustment.

7. Self-lock— Precise worm and worm gear transfer large torque efficiently with low noise(max. 50 dB) and long life. The self-lock function prevents inversion and insure stability and reliability. High-effective lubricant oil has been added ex-factory, it doesn t need to add any more.

8. Anti-off bolt — The bolt will attach to the cover when removing the cover. All external bolts are made of stainless steel.

9. Installation — Installation size at the bottom of Electric Actuator meets international standard ISO5211 and DIN3337. The output hole is ditetragon that it is easy to install by linear or 45°. The actuator can be installed vertically or horizontally.

10. Circuit — Controlling circuit meets single-phase or three-phase power supply standard with reasonable and compact layout. Terminals meet various of additional functional requirements effectively.

4.2 Standard Technical Parameter

Shell Enclosure :IP67, NEMA4, Exd II CT5

Power

Standard:220VAC/1ph

Optional:110VAC/1ph, 380V/440V/3ph, 50/60Hz, ±10%

24VDC/110VDC/220VDC

Motor Asynchronous motor

Limit switch 2×Open/ Close, SPDT, 250VAC 10A

Auxiliary limit switch 2×Open/ Close, SPDT, 250VAC 10A

Torque switch Close/Open, each 1, SPDT, 250VAC 10A Except OHQ-005/008/010

Travel 90°±10° 0°270°

Fail safe/

Operating temperature

Internal-placed thermal protection, Open 115 ±5/Close 97 ± 5

Indicator Continuous position indicator

Manual operate Declutching mechanism, operate by handwheel

Self-locking device Self-locking by worm and worm gear

Mechanical limit 2 × external adjustable stopper

Space heater 30W(110V/220VAC)

Conduit entry 2 × PF 3/4”

Ambient temperature -20+70

Lubrication Grease molyEP type

Material Steel, Aluminum alloy, Aluminum bronze, Polycarbonate

Ambient humidity Max 90 RH Non-Condensing

Anti-vibration X Y Z 10g, 0.234 Hz, 30 minutes

External coating Dry powder, Epoxy polyester, high anti-corrosion

4.2 Standard Technical Parameter

Shell Enclosure :IP67, NEMA4, Exd II CT5

Power

Standard:220VAC/1ph

Optional:110VAC/1ph, 380V/440V/3ph, 50/60Hz, ±10%

MODULATING INPUT SIGNAL : 0-10V, 4-20mA

24VDC/110VDC/220VDC

Motor Asynchronous motor

Limit switch 2×Open/ Close, SPDT, 250VAC 10A

Auxiliary limit switch 2×Open/ Close, SPDT, 250VAC 10A

Torque switch Close/Open, each 1, SPDT, 250VAC 10A Except OHQ-005/008/010

Travel 90°±10° 0°270°

Fail safe/

Operating temperature

Internal-placed thermal protection, Open 115 ±5/Close 97 ± 5

Indicator Continuous position indicator

Manual operate Declutching mechanism, operate by handwheel

Self-locking device Self-locking by worm and worm gear

Mechanical limit 2 × external adjustable stopper

Space heater 30W(110V/220VAC)

Conduit entry 2 × PF 3/4”

Ambient temperature -20+70

Lubrication Grease molyEP type

Material Steel, Aluminum alloy, Aluminum bronze, Polycarbonate

Ambient humidity Max 90 RH Non-Condensing

Anti-vibration X Y Z 10g, 0.234 Hz, 30 minutes

External coating Dry powder, Epoxy polyester, high anti-corrosion

4.2 Standard Technical Parameter

Shell Enclosure :IP67, NEMA4, Exd II CT5

Power

Standard:220VAC/1ph

Optional:110VAC/1ph, 380V/440V/3ph, 50/60Hz, ±10%

24VDC/110VDC/220VDC

Motor Asynchronous motor

Limit switch 2×Open/ Close, SPDT, 250VAC 10A

Auxiliary limit switch 2×Open/ Close, SPDT, 250VAC 10A

Torque switch Close/Open, each 1, SPDT, 250VAC 10A Except OHQ-005/008/010

Travel 90°±10° 0°270°

Fail safe/

Operating temperature

Internal-placed thermal protection, Open 115 ±5/Close 97 ± 5

Indicator Continuous position indicator

Manual operate Declutching mechanism, operate by handwheel

Self-locking device Self-locking by worm and worm gear

Mechanical limit 2 × external adjustable stopper

Space heater 30W(110V/220VAC)

Conduit entry 2 × PF 3/4”

Ambient temperature -20+70

Lubrication Grease molyEP type

Material Steel, Aluminum alloy, Aluminum bronze, Polycarbonate

Ambient humidity Max 90 RH Non-Condensing

Anti-vibration X Y Z 10g, 0.234 Hz, 30 minutes

External coating Dry powder, Epoxy polyester, high anti-corrosion

Pneutork series electric actuator is used for controlling 0°-270° rotation of the valves and other similar products, such as butterfly valve, ball valve, damper, flapper valve, plug valve, louver valve and so on. It widely applies to petroleum, chemical, water treatment, shipping, paper making, power plant, heating, light industry and other industries. It can be driven by 380V/220V/110V AC power or 24V/110V DC power, inputs 4-20mA current signal or 0-10V DC voltage signal as control signal. It moves the valve to the right position, and achieves automatic control, its maximum output torque is 2000N·M. (CE certificate approved).

Performance Feature

1. Actuator body —The body is made of hard aluminum alloy with anodize treatment and polyester powder coating. It is highly corrosion-resistant and waterproof level is IP67. IP68 is optional.

2. Motor —Fully enclosed squirrel-cage motor with small size, large torque, small inertia force and F class insulation rating. Internal hot protection switch avoids damaging of the motor.

3. Manual Structure —The design of spanner is safe, reliable, labor-saving and small. When the actuator is not energized, it can be operated by handle. When you don t need manual operation, put the spanner in the slot on back side of the actuator.

4. Position Indicator - Installed in the center axis for observing position of valve. To avoid ponding and observe conveniently, it is designed by convex lens.

5. Seal — It has good seal performance. And its protection class is IP67, also IP68 is optional.

6. Limit Switch—Mechanical and electronic double limit. Mechanical limit screw is adjustable, safe and reliable.

Electronic limit switch is controlled by the cam. Position of limit switch can be set accurately and conveniently by simple adjustment.

7. Self-lock— Precise worm and worm gear transfer large torque efficiently with low noise(max. 50 dB) and long life. The self-lock function prevents inversion and insure stability and reliability. High-effective lubricant oil has been added ex-factory, it doesn t need to add any more.

8. Anti-off bolt — The bolt will attach to the cover when removing the cover. All external bolts are made of stainless steel.

9. Installation — Installation size at the bottom of Electric Actuator meets international standard ISO5211 and DIN3337. The output hole is ditetragon that it is easy to install by linear or 45°. The actuator can be installed vertically or horizontally.

10. Circuit — Controlling circuit meets single-phase or three-phase power supply standard with reasonable and compact layout. Terminals meet various of additional functional requirements effectively.

Pneutork series electric actuator is used for controlling 0°-270° rotation of the valves and other similar products, such as butterfly valve, ball valve, damper, flapper valve, plug valve, louver valve and so on. It widely applies to petroleum, chemical, water treatment, shipping, paper making, power plant, heating, light industry and other industries. It can be driven by 380V/220V/110V AC power or 24V/110V DC power, inputs 4-20mA current signal or 0-10V DC voltage signal as control signal. It moves the valve to the right position, and achieves automatic control, its maximum output torque is 2000N·M. (CE certificate approved).

INPUT CURRENT : 24V, 110V, 220V, 380V, 415V

INPUT SIGNAL : 0-10V, 4-20mA,

WIT REMOTE CONTROLS

WITH LCD DISPLAY.

Performance Feature

1. Actuator body —The body is made of hard aluminum alloy with anodize treatment and polyester powder coating. It is highly corrosion-resistant and waterproof level is IP67. IP68 is optional.

2. Motor —Fully enclosed squirrel-cage motor with small size, large torque, small inertia force and F class insulation rating. Internal hot protection switch avoids damaging of the motor.

3. Manual Structure —The design of spanner is safe, reliable, labor-saving and small. When the actuator is not energized, it can be operated by handle. When you don t need manual operation, put the spanner in the slot on back side of the actuator.

4. Position Indicator - Installed in the center axis for observing position of valve. To avoid ponding and observe conveniently, it is designed by convex lens.

5. Seal — It has good seal performance. And its protection class is IP67, also IP68 is optional.

6. Limit Switch—Mechanical and electronic double limit. Mechanical limit screw is adjustable, safe and reliable.

Electronic limit switch is controlled by the cam. Position of limit switch can be set accurately and conveniently by simple adjustment.

7. Self-lock— Precise worm and worm gear transfer large torque efficiently with low noise(max. 50 dB) and long life. The self-lock function prevents inversion and insure stability and reliability. High-effective lubricant oil has been added ex-factory, it doesn t need to add any more.

8. Anti-off bolt — The bolt will attach to the cover when removing the cover. All external bolts are made of stainless steel.

9. Installation — Installation size at the bottom of Electric Actuator meets international standard ISO5211 and DIN3337. The output hole is ditetragon that it is easy to install by linear or 45°. The actuator can be installed vertically or horizontally.

10. Circuit — Controlling circuit meets single-phase or three-phase power supply standard with reasonable and compact layout. Terminals meet various of additional functional requirements effectively.