Our Products
PRECISION Induction Heater - Series PIH - is designed to heat the Bearings and other shrink-fit components prior to mounting using latest technology intelligent microcontroller based electronic controls.
The life of Bearings and other torque transmitting steel components, which are shrunk-fit on shaft, may get cut short due to rough handling and faulty installation or mounting methods. This can be avoided by expanding them by induction heating for the purpose of mounting of the component.
PRECISION Induction Heaters - Series PIH - are available in 5 different models for mounting, range of bearings having bore size from 14 mm and above. Fast, safe and economical heating of bearings is best features of PIH Induction heaters.
PIH series is light weight and portable for better performance. It has power capacity of 3.5 / 4.0 KVA. The controls are intelligent microcontroller based programmable electronic controls. It has two operating modes, Temperature mode and Time mode. Both are controlled through feather touch key Board. Both modes can be seen at the time of operation. It can also be used to heat bearings of larger diameter using a pair of Raiser Blocks size 55 x 55 x 125 mm. The unit can also be used to heat a plate of any magnetic material by placing the plate in place of the horizontal yoke across the vertical supports.
Sr. | PRODUCT DATA | PIH - 2000 |
---|---|---|
1) | Diameter (mm) Bearing | 20 to 300 |
2) | Bearing Weight | 40 Kg |
3) | Power | 2.0 / 2.6 KVA |
4) | Voltage | 230V |
5) | Power Control | 25%, 50%, 75%, & 100% |
6) | Temperature Control (Range) | 0 - 250oC |
Maximum Temperature | 400oC | |
Accuracy Temperature | ± 3oC | |
7) | Time - Control | 0 - 99 Minutes |
8) | Residual Magnetism | < 2A / cm |
9) | Overall dimensions (wxdxh) (mm) | 300 x 260 x 250 |
10) | Space between supports (wxh) (mm) | 100 x 130 |
11) | Weight (Main Unit) | 19 Kg. |
12) | Weight with Standard Yokes | 22 Kg. |
13) | Horizontal Yoke Sizes (mm) | 14 x 14 x 220 |
20 x 20 x 220 | ||
45 x 45 x 220 | ||
14) | Can Heat Sealed & Pre-greased Bearings | |
15) | Thermal Over Protection |
Precision Manual Bearing Puller is deisgned for economical maintenence purpose Bearing Puller (2 jaws and 3 jaws). This is operated by tightening and losing of handle by means of threads on the shaft. The versatile sets offer unmatched application in the maintenance and repair field. To make a Manual Bearing Puller Set choose the capacity required in the individual attachments.
System:
The pressure required to dismount bearing assemblies is 200 to 500 kg/cm2 range; and for torque-transmission joints is 800 to 1800 kg/cm2 range. In optional case the pressure required is 2500 to 3000 kg/cm2 is required.
Oil Injector Pump manufactured by PRECISION is designed to operate up to 3000 kg/cm2 giving adequate pressure for all normal dismounting applications.
Field of Use:
This System has a variety of applications; from small components to extremely large ones with cylindrical or taper seats. It is widely used for mounting and dismounting components with interference fits which are transmitting large fluctuating loads, such as gears, flywheels, crankshafts, couplings and bearings.
Mounting and Dismounting:
Oil Injection System is the only method of mounting and dismounting for shrunk fit components without damage. The mounting and dismounting force is reduced, or almost eliminated, by using the oil injection method.
PRECISION HYDRAULIC BEARING EXTRACTOR - MODEL : BWT PRECISION developed a unique concept as Mobile Workstation to dismount direct mounted bearings without any damage or scoring to the bearing bore or shaft seating, with minimal force. This equipment is specially designed to inject oil under high pressure between the bearing bore and shaft seating, enabling the bearing to be pulled out floating on thin film of oil.
Available in three Models :
Precision Hydraulic Scissors Lifts are widely used in different industries and are appreciated nationwide. Our unmatched quality range of hydraulic scissor lift has enabled us in achieving the market credibility and the trust and reliance of our clients.
Specifications:
GM hydraulic power packs GM PC - Series are widely used in the transfer of hydraulic fluids under high pressure. This is most appropriate for diverse operating apparatuses such as hydraulic work over units in servicing oil and gas wells. Our durable hydraulic power presses and high pressure hydraulic power packs are available in different capacities ranging between 15 liters to 1000 liters.
Wide range of power pack machinery, which are very efficient. Along with excellent productive capacity, theses power packs are durable and are made available at competitive prices. Our electric motor driven hydraulic power pack pumps come with standard accesories for easier operation.
Salient features of our hydraulic power packs are:
Precision AC / DC Stackers is designed for safe and efficient way out for endless material application at distribution center, Logistics Company and other industries. The entire range is fabricated using latest technology and qualitative material. Some of the salient features of this hand stacker are:
Features
Precision Hydraulic Hand Pallet Truck Precision PT - Series are available in specifications and dimensions offered by our clients. In addition to this, these machines are subjected to stringent quality tests to ensure their functionality. These are manufactured from quality proven raw material such as iron and its alloys. They are used for raising pallets above the ground to a certain height. Their acceptability has grown mainly because of low price, strong construction, easy to use and very low maintenace.
Precision Hydraulic Hand Stackers is designed for safe and efficient way out for endless material application at distribution center, Logistics Company and other industries. The entire range is fabricated using latest technology and qualitative material. Some of the salient features of this hand stacker are:
Specifications:
Precision Bearing Fitting Tool kits are specially matched to meet tool storage needs of professional mechanics and service technicians. These very carefully designed set structure offer both an effective means of tool storage and a showcase appearance. Built to last, these kits are a wise investment because they hold their value.
Precision Bearing Fitting Tool kits comprise Impact Sleeves, 36 Impact rings made out of super tough light weight impact resistant Ultra High Molecular Weight impact resistant Polyethylene rings made to fit diverse combination of impact rings and impact sleeves.
With the above assembly one can mount over 200 types and sizes from 10mm to 50mm of bearings with precision and accuracy. Each sleeve can accommodate about 200 mm length projecting shaft. The Kit comes in suitable carrying steel case. Selection chart is provided in each kit to identify easy mounting. br>
Specifications: