preci tech india

As Rao Nagar, Hyderabad, Telangana

A Thermic Fluid Heater is an industrial heating equipment used exclusively where heat transfer is more pertinent than pressure. The fluid circulates in the entire system for heat transfer for specific operations & is used in heating processes that use high viscous oil as a heating medium. It is widely used in the Textile, Printing, Dyeing, Plastic and Rubber Industries.> Capacity : 5000 to 9000 Million Kcal / Hr> Temperature : 35oC to 400oC> Fuel : Diesel, LDO, FO

Operating Range : 326CAppearance : Clear & BrightDensity @29.5C : 865Kg/m3Max. Temperature : 326C Viscosity Index : 124Flash Point : 224CPour Point : -18CKin.Vis.@40 0C : 24-28Max.Film Temperature : 351CBoiling Point at1013 mbar : 361CAuto Ignition Point: 400C

The cremation furnace, also known as the cremation-oven is used in a crematorium. The incineration process of a dead body is carried at a temperature ranging between 1000 to 1300 degrees celsius. The benefits of using incinerators for dead body are:It eliminates the risk of contamination through toxins.Human Body Incinerators are eco-friendly than the conventional processes.PRECITECH launched HUMAN BODY CREMETOR at the time of the COVID-19 situation. When Covid-19 held up our lives and the deceased lacked proper cremation, we introduced the Human Body Incinerator as an assistance to the Governments of Telangana, Andhra Pradesh & Karnataka. Our deeds to aid humanity is always paramount.> Capacity : 1kg to 4Ton/Hr.> Type : Stationary> Fuel : Diesel, Gas, Electirc> Package : Primary chamber + secondary chamber + dust collector + heat recovery system + smoke washer + id fan + fd fan + chimney along with fans and burners with auto control system.

Animal waste incinerators are used for disposing of dead animals. The dead remnants of the animal are converted to ash eliminating the spread of deadly toxins. In the incineration process, the temperature in the chamber goes up to 1300 deg resulting in minimal smoke and waste gases.> Capacity : 1Kg to 4 Ton / Hr> Type : Stationary> Fuel : Diesel, Gas, Electric> Package : Primary chamber + secondary chamber + dust collector + heat recovery system + smoke washer + id fan + fd fan + chimney along with fans and burners with auto control system.

FUEL-FREE INCINERATOR is a Disposal Machine to dispose all the combustible waste which has some calorific value, such as Food waste, Organic waste, Agricultural, Papers, Cloths, Mattresses, Boards, Plastics waste [non chlorin contain paper plates and cups, Sanitary napkins, Adult and child Dippers, into ash, WITHOUT Electricity or external Fuel. It works on a natural draft and forced draft depend on type and size of machine with differential pressure. In-built scrubber cleans the flue gas and controls the emissions and odour. The Temperature inside the combustion Chamber/ Reactor goes up to 900 degC and most of toxic dies there itself. The entire garbage can be dumped into the machine and it gets converted to ash without any input energy such as electricity or fuel [diesel or gas] Installing this machine will save the huge cost and efforts on transportation for bringing the material to common location for processing and also the operation cost involved in processing the waste. It require less man power and expertise of operation.

It is strictly advisable that medical waste is subjected to high temperatures to destroy pathogens and their toxicity. Precitech manufactures the best Bio-Medical Waste incinerators abiding by the BMW Regulations. We supplied the BMW incinerator to various INDIAN MEDICAL ASSOCIATIONS.> Capacity : 1Kg to 4 Ton / Hr > Type : Stationary> Fuel : Diesel, Gas, Electric> Package : Primary chamber + secondary chamber + dust collector + heat recovery system

The Rotary Kiln Incinerator contains a cylindrical furnace chamber. Precitechs Rotary Kiln Incinerator provides a proper incineration process through the movable rotating chamber. The temperature inside the compartment goes up to 1300 degrees easing the incineration process of waste. The chemical, industrial or hazardous wastes, and medical waste is destroyed safely and sustainably. > Capacity : 1kg to 4Ton/Hr.> Type : Stationary> Fuel : Diesel, Gas, Electirc> Package : Primary chamber + secondary chamber + dust collector + heat recovery system + smoke washer + id fan + fd fan + chimney along with fans and burners with auto control system.

A large amount of solid waste is generated every day and everywhere. A proper incineration process is required to eliminate it. The Solid Waste Incinerator turns solid waste into ash and helps eradicate the land-fill methods to dump waste. The Solid Waste Incinerators are based on the principles of green-technology and environment-friendliness.> Capacity : 1Kg to 4 Ton / Hr> Type : Stationary> Fuel : Diesel, Gas, Electric

Incineration is a heat treatment process that involves the combustion of organic substances contained within the waste materials. The process requires high temperatures to initiate and support the thermal treatment process of waste. The Electric Incinerator produces high temperatures to eliminate the toxins, bacterias, and any other toxic components in the garbage with no requirement of other fuels. > Capacity : 1kg to 4Ton/Hr.> Type : Stationary> Fuel : Diesel, Gas, Electirc

Incineration is a heat treatment process that involves the combustion of organic substances contained within the waste materials. The process requires high temperatures to initiate and support the thermal treatment process of waste. The Electric Incinerator produces high temperatures to eliminate the toxins, bacterias, and any other toxic components in the garbage with no requirement of other fuels.> Capacity : 1Kg to 4 Ton / Hr> Type : Stationary> Fuel : Electric

Similar to a thermic fluid heater, the Diesel Fired Thermic Fluid Heater is also used for heat transfer. But in this case, the fluid is heated externally. This is because of its characteristics which include high heating temperature, low working pressure, and best at energy saving. Its widely used in a variety of industrial heating processes such as the Petroleum Industry, the Chemical Industry, and the Synthetic Fibre Industry.> Capacity : 5000 to 9000 Million Kcal / Hr.> Temperature : 35oC to 400oC> Fuel : Diesel, LDO and FO

The Electric Thermic Fluid Heaters are different from Oil & Gas-fired Heaters. The fluid heaters are specifically designed to be electrically fail-proof that can withstand high temperatures taking care of numerous electric standards. These heaters are considerably more cost-efficient and are popularly used in the Chemical Industries, and Plywood and the Laminates Manufacturing Industries.> Capacity : 5000 to 9000 Million Kcal / Hr> Temperature : 35oC to 400oC> Fuel : Electirc

Wood Fired Thermal Fluid heater is an innovative type of heating equipment with solid fuel and fuel gas as the heat source. The heat carrier fluid forces the heat transfer to the user equipment via a circulating pump and then returns to the heating furnace for reheating. Its characteristics are high heating temperature, low working pressure, and energy-saving mode. This makes it best for the Petroleum and the Chemical Industries. > Capacity : 5000 to 9000 Million Kcal / Hr.> Temperature : 35oC to 400oC> Fuel : Wood, Husk, Pallets.

Furnace Oil Fired Thermic Fluid Heaters are perfect heating solutions used where only heat transfer is desired instead of pressure. In the Thermic Fluid Heaters, fluid is circulated in the entire system for heat transfer in the desired processes. These fluid heaters use high viscous oil as a heating medium. Various Food Processing, Rubber, Plastic, Publishing, Print, Textile, and Chemical Industries require Furnace Oil Fired Thermic Fluid Heaters for smooth functioning.> Capacity : 5000 to 9000 Million Kcal / Hr> Temperature : 35oC to 400oC> Fuel : Diesel, LDO, FO

The Oil Fired Steam Boilers make use of Diesel or Furnace Oil to achieve the high temperatures necessary to convert it into steam. It is ideally utilized in Manufacturing Industries like Paper, Food, and Wood Processing. With supreme quality and cutting-edge technology, our product is sure to aid your production process.> Capacity : 5kg/Hr to 20Ton/Hr.> Pressure : 1kg/Cm2 to 20kg/Cm2> Fuel : Diesel, LDO, and FO

Similar to conventional Steam Boilers operation, the Gas Fired Steam Boilers produce immense currents of hot steam whilst utilizing gas as a driving fuel. In Gas Fired Steam Boilers, most of the time LPG or Natural Gas is used to heat water at Steam Boiler temperatures to generate steam. The Gas Fired Steam Boilers are used in Textile Industry, Medicine Industry, Pharma Industry, Food Manufacturing, and Beverage Industry.> Capacity : 5kg/Hr to 20Ton/Hr.> Pressure : 1kg/Cm2 to 20kg/Cm2> Fuel : Bio Gas, LPG, and Natural Gas

The most popular variant of Steam Boiler is a Wood-Fired Steam Boiler. It energizes from the combustion of wood and produces high temperature which in turn is required to produce boiler steam. It is often used in the Medical Industry, Pharma Industry, and the Food and Beverage Industry.> Capacity : 5kg/Hr to 20Ton/Hr.> Pressure : 1kg/Cm2 to 20kg/Cm2> Fuel : Wood

An Electric Steam Boiler is the most fundamental variant of all the available boiler types in the market. Electric boiler is a compact machine that is simple and requires considerably less space. These require minimal maintenance and almost zero human intervention for functioning. These are prevalent in the Sugar industries, Paper Industries, and Pulp Industries.> Capacity : 5kg/Hr to 20Ton/Hr.> Pressure : 1kg/Cm2 to 20kg/Cm2> Fuel : Electricity

An Electrode Steam Boiler utilizes the conductive and resistive properties of water. These properties of water are employed to carry electric current. The boiler uses electrodes submerged in water resulting in increased boiler efficiency. Electricity flows through the electrodes to contact the water, which evaporates it into steam. It is widely used in Dairy plants, the Food Processing Industry, and the Rubber Industry.> Capacity : 5kg/Hr to 20Ton/Hr.> Pressure : 1kg/Cm2 to 20kg/Cm2> Fuel : Electricity