Premier Electrosystems

Vile Parle, Mumbai, Maharashtra

Model : PE 100 Test Voltage : 0 3/ 5/ 10 KV AC continuously adjustable by Dimmer. Display : 4 digit LED display Resolution : 0.01 KV Accuracy : 0.6% +/- 1 count Test Current : Up to 30 mA/ 100 mA digitally adjustable through keypad Display : 4 digit LED display Resolution : 0.1 mA Accuracy : 0.6% +/- 1 count Timer : Programmable Digital Timer Timer Range : 0 9999 Sec/ Min/ Hour , Settable by membrane key switches on front Facilities : 1. Single button operation for HV ON, HV OFF, Test Pause and Test Resume 2. LED Indication of HV On, HV Off, Product OK, Product Fail 3. Buzzer programmable for On during HV ON or Alert when Test Fail 4. Remote start switch for momentary on 5. Memory : Auto restart on power failure- Same test voltage, same set point and timer resume (To be specified) Power : 230 V AC + 10%, 50 Hz Calibration : Traceable to NABL Warranty : 1 year

vaw meters indicate the voltage, current, wattage among other parameters that are crucial for testing of any product.

introduction of composite volt-amp-watt meters by premier electrosystems in 1985 has been a runaway success; mainly due to their performance and reliability. premier electrosystems have been the pioneers of multi parameter meters i.e. voltage, current, wattage, kilo watt hour, frequency, power factor, run hour, load hour, 13 level thds in a single meter

those industries which comply with bis standards or other international standards, will find composite v-a-w meters as a necessity. applications are in:

* domestic appliances manufacture, such as fans, mixers, geyser, irons, etc.

* lighting & switch manufacture.

* motor industry

* industrial heater manufacture.

when used pc/ ct signals, premier's vaw meters are useful for high voltage/ current utilies as well.

*direct indication of voltage, current & wattage.

*dimmer controlled variable output voltage from 0-270 v ac upto 15a.

*5/15 amp sockets for easy connection of load.

*mcb at input protects against accidental short circuit.

*an ideal test instrument for manufacturers, service centers of domestic/ industrial appliances, electrical motors, electrical accessories, heaters etc.

*most suitable for r & d centers.

*test set up is supplied with nabl traceable calibration certificate.

One hand operation.No cranking.Stabilized high voltage dc supply as test voltage.Output short circuit protected (max current 1ma.)designed with relevant cil, isi and ieee drafted specification.Applies rated d.c. Voltage across the measurement terminals & displays the value of insulationsstechnical specificationsdisplay : 3 12; digit, 0.5' ht., red ledtest voltages : 500v 1000v selection by rotary selector switch (any one).Ranges : 0-199meg199 x 10meg19.9 gega (any one).Resolution : 1 meg 10meg0.1 gega (any one).Accuracy : 1% +- 1 count.Protection : against short circuitinductive loadcapacitive loadcharged input.Power : 230v ac +- 10%, 50hz.Dimensions : 190(w) x 90(h) x 255(d) mm3options : 1. Attractive leather carrying case. 2. Other test voltages on request. 3. Load discharges facility to ease the operation of connecting, disconnecting and discharging the sample under test.

technical specifications

1) dimmer controlled variable line voltage.

the test panel in dynamic mode feeds dimmer controlled variable voltage, upto the rated load current and gives indication of voltage, current, wattage & frequency on individual digital indicators.

2) temperature measurement.

digital temperature indicator with suitable sensor for the specific application for the measurement of temperature upto 1200 c.

3) rpm measurement.

digital rpm indicator along with sensor suitable for the application for the measurement of speed upto 9, 999 rpm./30, 000 rpm

4) high voltage breakdown.

useful for the measurement of breakdown voltage of the appliance under test. test voltages available are 0-3kv/5kv.30/100ma. indication of the test voltage & test voltage & test current are provided on digital indicators

5) earth contact resistance test.

e c r tester feed 0-30 amps continuously adjustable current through the earthing line & thereby gives the value of earth contact resistance.

6) insulation test.

digital insulation tester applies 500 v d c across the measurement terminals and displays the value of insulation.

7) digital leakage current test.

digital leakage current tester suitable for measuring the leakage current from line or neutral to the body of an appliance under test.

8) resistance test.

digital ohm meter with four wire measurement system allows accurate & precise resistance measurement

9) life endurance test.

depending on the type of appliance can be provided which will keep the item under test on for the desired adjustable duration & off for the desired adjustable duration. digital counter counts on/off cycles

Designed with relevant isi drafted specification. Measures earthing contact resistance of domesticindustrial electrical appliances.

Technical specifications :

test current : Upto 30 a, continuously variable by means of dimmerstat, resolution : 0.01 a Accuracy : 0.6% +- 1 count

Test voltage : 0-6 v max.

technical specifications

display : 3 1/2 digit, 0.5" ht red led display

range : 0-1.999ma

resolution : 1 micro amp

accuracy : 0.6% 1 count.

impedance : 2 k ohm

facility : line selector switch to measure leakage current from line 1 or line ii to body of the appliance under test.

power : 230 v ac 10%, 50hz

output : socket provided for easy connection of appliance under test

dimensions : 220(w) x 70(h) x 180(d) mm3

High voltage breakdown test-flash test of insulation materials, electrical instruments, motors, transformers, chokes, coils, switches, domesticindustrial appliances, heaters. Epoxy moulded transformer for high reliability. Sleek & compact design. Test voltage & leakage current indication on digital display with excellent sability. Timer facility - optional. Audio buzzer for hv on along with hv on, hv off visual indication. Remote onoff switch optional. Attractive clear acrylic safety apparatus for shock hazard free operation - optional.

Technical specifications

Test voltage: 0-3 kv/ 5 kv/ 10 kv continuously variable by dimmer stat: test voltage monitored by digital kv meter.

Display : 4 digit, 0.5"ht., red led.

Ranges : 0-10 kv Resolution : 0.01kv . Accuracy : 0.6% +- 1 count.

Test current : 30 mA/ 100 mA/ 200ma. Leakage current monitored by digital mA meter.

Display : 4 digit, 0.5"ht., red led.

Ranges : 0-200mA . Resolution : 0.1 ma . Accuracy : 0.6% +- 1 count

Power : 230v ac +- 10%, 50 hz.

Diameter:5 mm
Material:Stainless Steel
Force exerted on the ball:20 N

digital timer section

display : 3 digit, 0.5" ht, red led

range : 0-99.9 sec resolution : 0.1 sec

time base : quartz crystal based oscillator.

accuracy : 0.05% 1 count

count mode : up-the timer starts counting up and stops and latches to the last reading when thermal cut out trips off.

reset : manual

digital ac voltmeter section

display : 3 digit, 0.5" ht red led.

range : 0-300 v ac

resolution : 1 v ac

accuracy : 0.5% 1 count

dimensions : 220(w) x 70(h) x 180(d) mm3