Our Products
This instrument is used for uniform treatment of pulp under standard condition for producing the pulp as per commercial production. MS Fabricated tub lined with Stainless Steel ground and polished. volume 200 liters, 5 kg bone dry pulp. Provided with motor and V belt drive.
Auto Vat machine is used for the preparation of handmade pulp sheets.
A Vat with mesh frame is submerged in the water tank, through a lifting device mechanism for lifting the pulp sheet on fixed metallic screen connected with the foot paddle.
Different sizes of Auto Vats are available to form the standard sheets of size - A/4 and 24 x 32 etc.
Cut size paper: 22 x 30
Or as per the customer's Requirements.
Optional : This Model is also available in full stainless steel 316.
The Paper Guillotine has a sheet metal base and incorporates a guide for the material to be cut. Both top and bottom cutting blades are made from special knife steel and can be re sharpened.
This instrument is used for shortening the drying time of wet pulp or paper samples before determining the dry weight or moisture content. It is provided with flat heating elements.
Stainless steel sheet fabrications with insulating material ensure long service life.
Suitable for Sheet Size:
Max. width 250 mm, Max length 300 mm.
Temperature:
Adjustable over a wide range up to maximum of 180o 10oC.
For preparation of chips from wood, bamboo and other similar material for laboratory cooking trial and educational purposes. Input tube diameter 80 mm set at and angle of about 500.
Chipping disc: 350 mm diameter
Speed : 700 rpm.
Option:
Extra knives
The Rag Chopper is suitable to chop the Different Raw Material i.e, cotton Lintel, Jute, Gunny Bags, hosiery waste in small pieces to feed the digester / Beater.
A laboratory corrugating machine for producing a sample to evaluate flat crush resistance of corrugating medium.
For producing a sample to evaluate flat crush resistance of corrugating medium. 'A' fluting rolls are heated upto 176oC and maintained a constant temperature by thermostatic temperature controller.
Standard model available with 'A' flute.
Optional : With Digital temperature Indicator cum controller Other flutes size available.
For electronically measuring and digitally presenting the Brightness,
Opacity and Gloss of the paper and other similar material by angular reflectance (Photovolt Type) Made with imported optical.
Accessories:
White Enamel Standard.
High Reflectance White Enamel Standard.
Polished Black Glass.
Cavity represents a sample of zero reflectance
For de-fibration of dry samples on laboratory scale.
The unit consists of a pulping container with a rotor at the bottom driven by a timing belt in the lower part of the unit.
The electric motor is adjustable by the variable drive to control the rotational speed.
2 Liters Capacity
5 Liters Capacity
10 Liters Capacity
Other higher capacity pulpers are also available.
This instrument is used for testing the crease ability of carton board. Ensures fault free folding the Carton Board Creaser (patra type) gives the board mill and the carton makes a ready and reliable method for checking the creasing qualities of carton boards. In addition it gives the carton maker a guide to the correct settings for cutting and creasing equipments so that the trial and creasing error in make ready can be reduced and the production of faulty cartons avoided.
Suitable for board caliper 300-1000 Micron (0.012-0.040 inch).
18 creasing channels between 1 - 4.06 mm (0.04 0.016 inch). Variable crease depth.
Designed for the application of the paints, varnishes, adhesives, liquid printing inks starch and many other surface coating using wire wounded metallic bar under accurately controlled conditions with variable coating speed between 2 and 15 mm/min which provides uniform coating.
The Equipment consists of 7 Nos coating rods which provide different coating thickness.
The coated area is 27 cm x 15 cm (Standard)
For accurate and rapid preparation of test pieces. PE-1007
A Precision Sample Cutter - Provided with an automatic clamping device, which by means of clamping beam, holds the sheet material firmly prior to the cutting action cutting size 210 x 300 mm.
We manufacture and export highly efficientBauer Mcnett Fibre Classifierthat can be installed easily and requires low maintenance. It is used for determining the fibre length and is highly demanded in numerous industries. The offered machine is manufactured using optimum quality components and advanced technology at our hi-tech manufacturing unit. Available in different technical specifications, our offeredBauer Mcnett Fibre Classifieris available at industry leading prices.
Features:
This instrument is intended for measuring the Basis Weight (GSM) of paper and other sheet materials by weighing a small test sample with given dimensions. Scales are calibrated to precision dead weights. This accuracy is maintained as long as the pendulum returns to its original form and is kept free from corrosion, distortion, or other causes, which may affect its weight and balance
This instrument is used for incineration of solids. Temperature range upto 1100 C. with digital temperature indicator-cum-controller
Working temperature 930 C.
Temperature controlled by energy regulator.
Complete with Pyrometer and Thermocouple.
Size:9 x 4 x 4
Size: 10 x 5 x 5
Size: 12 x 6 x 6
Size: 12 x 8 x 8
Lab Heat Sealer finds application In Plastic. These sealer allows adjustment of the force applied on plastic specimen between 15 to 180 Kgs as required in particular processes, further the instrument with digital display support to esy reading and microprocceor based working that provide reliability in ruselt achieve
This instrument is used for wet grinding and de-fibrating chips or experimental pulp making. Utilized for developing pulping processes and strength development studies on raw, steamed or chemically cooked chips, fully cooked pulp, cooked straw, waste paper and many other materials.
Disc dia 304 mm, speed 1500-3000 rpm with motorized screw feeding arrangements.
Option :
Extra Grinding Disc
It is intended to coat the sample sheet materials in 10 X 12 size.
This coater provides uniform coating of the coating medium on to the test specimen.
The laboratory coater is eminently suitable for the coating of latex, ink, lacquer and plastic dispersions etc.
A sample of standard size should be fix on the top of the movable steel plate,
The height of the air knife above the test specimen and its angle in relation to test specimen are adjustable.
The amount of air that regulates the coating layer is adjusted by the regulator and the coating dispersion or pigment formula is poured close the air knife across the paper.
A uniform coating on the sample is formed with the help of forced air.
This instrument is used for incubating BOD samples of effluent and others. Double walled, heavily insulated.
Temperature ranges 5C to 50C. Accuracy 0. 5C. With digital Temperature Indicator cum controller
Automatic control.
Double door construction
Inner chamber size 33 X 20 X 16.5.
Inner chamber size 34.5 X 22.5 X 22.5.
Inner chamber size 36 X 26 X 23.
For KCL TYPE SHEET FORMER - Pneumatically operated sheet press suitable for de-watering of square sheets, provided with two adjustable timers i.e. 12 & 6 minutes pressing with adjustable timing for two sequential de-watering of sheets. Pressing force maximum 16 kN.
Maximum sheet size 330 x 350 mm.
Standard Model sheet size 165 x 165 mm
Suitable for other sizes: 200 x 200, A4 size.
This instrument is used for producing pulp from various fibrous material under specified and controlled condition under pressure, temperature and time. Maximum pressure 15 kg/cm2. Electrically heating system provided with Microprocessor based temperature indicator cum controller with facility of more detailed pre-programming to control the boiling sequence.
Temperature Range: 50 Coto 200 Co
Standard Model: 15 liter capacity
Other available capacities : 15/25/50/100 Liters
For production of laboratory paper sheets for physical tests. The design of the drainage system provides a uniform flow across the entire wire, thus permitting exceptionally uniform sheets. Laboratory sheets, prepared from suspenstions of pulp are used for determining physical properties such as apparent density, tensile index, tear index, folding endurance light scattering coefficient and air resistance. The conditions of sheet making should be similar to commercial production. Hand Sheet former (Model KCL Type) For production of Square Sheets.
Sheet size: 165 X 165 mm
Trimmed size: 200 cm2
Standard Accessories supplied along with equipment.
This instrument is used for separating shieves and fiber flock from a continuously fed pulp sample.
Design approved by the Technical section of the British Paper & Board Industry Federation. Average capacity: 5 Kg dried pulp per hour. Strainer area 500 X 240 mm. Screen Slot width 0.20 mm standard
Optional : Other slot width as per customer requirement.
The Lab Beater is used for beating pulp and as a defibration unit for incompletely digested fibrous materials.
Automatic Lab Beater with a smooth Touch Screen Control Panel.
Pneumatic Lifting & Lowering of Beater Roll
Pneumatically loading and unloading with specified load between the beater roll and Smooth Housing for a specified number of revolutions. Peripheral speed of Beater Roll & Smooth Housing. Predetermined Digital Revolution Counter and energy recorder.
High precision & best beater for processing pulp prior to formation of hand sheets, in order to determine the behavior of pulp when subject to definite beating schedule. This beater is ideally suitable for research purpose and routine checking of small quantity of pulps in laboratory.
This instrument is used for standardized disintegration of pulp to a homogeneous suspension required for preparation of laboratory hand sheet and other purpose. Pivoted drive unit with stainless steel propeller and shaft. The propeller is driven by electric motor via stepped timing belt, which ensures a direct drive without slippage.
Option:
Digital Preset impulse Counter on front panel for setting, desired number of revolution.
Pulp Container with Heating Elements and Thermostat control.
Pulping unit is used for laboratory production of chemical pulp. It is provided with pressure tested six autoclaves, of capacity 2.5 liters each suitable for 300/350 gm bone-dry samples, rotate in hot poly glycol bath. Microprocessor based temperature indicator cum controller with facility of more detailed pre-programming to control the boiling sequence.
Two Heating elements of capacity 7.5 KW each.
Digital temp Indicator-cum-controller precisely control the temperature range 50o-250oC.
Maximum Working pressure 15 Kg./cm2.
This instrument is used for determining the shieve content in ground wood pulp. Contains the slotted screen of width 0.15 mm slots. A motor driven eccentric diaphragm actuation. Provided the suction for fractionation on the surface of the screen filled of the water.
Designed in accordance with second report of the Pulp Evaluation Committee to the Technical Section of Paper Makers Association.
The Precision Test Strip Punch and Die paper/craftCutters are intended for accurate and rapid preparation of test pieces for use in tensile strength tests, ring crush tests, folding endurance test, water absorbency test and other similar tests without any deformation and damage. It is suitable for cutting a very wide range of sheet material such as plastics, textiles, paper and paperboard. Multi test samples cutting is simultaneously feasible.
Cut size: 15 x 300, 25 x 300, 50 x 300, 12.7 x 152 mm and also available at customer requirement.
15 x 300 mm for sample preparation of Tensile, Short Span, Folding (Kholer Molin) & Water absorption Test
TheHand Sheet Former (SCA Type).It is suitable for various industrial applications and is manufactured using optimum grade components and latest technology, this machine can withstand adverse working conditions. The offered machine is available in different technical specifications to meet the diverse needs of the clients. OfferedHand Sheet Former (SCA Type)requires low maintenance and can be operated easily.
Features:
With great conceit, we set up ourselves as the foremost manufacturer and exporter of excellent qualityLaboratory Valley Beaterthat is used to beat pulp in a uniform, standard and reproducible way. The offered product is available in various specifications to meet the diverse needs of the clients. Offered product is manufactured using highly durable components and innovative technology at our state-of-the-art manufacturing unit.
This instrument is used for moisture determination of Pulp, Paper & Paperboard etc.
Temperature range from room temperature to 250 C Air circulation by fan with digital temperature indicator cum controller.
Size:14 x 14 x 14
Size: 18 x 18 x 18
Size: 24 x 24 x 24
Size: 36 x 36 x 36