Other Products / Services #7257263

Manufacturer of various types of Rubberised Impellers, interchangeable with various OEM Designs for Warman, Vasa, Galighar etc.

Premier's Rubber Impellers are manufactured in line with specifications and designed to retrofit pumps of various OEM's like Warman, Vasa, Alfa, Pemo, Vacseal, Denver etc.

Part Reference Numbers

C2127

C2147

D3147

E4147

F6147

F8147

Any use of OEM Names is for Reference Only. The price stated on website is an indicative price for Reference Only, as prices vary depending on Model & Sizes, kindly connect with us for exact Price Quotation.

Premier's Wire Saw Rubber Rings are available in various sizes of 790 / 780 / 625 / 14" / 10" / 6" in different grades as per customer equipments. Premier's Rubber Rings are supplied across customers within Marble Industry for the last 50 years.
Premier's Rubber Rings used in Wiresaw - from Sizes - 60mm to 800mm. These are made of special premium natural rubber and highly researched specialty chemicals/adhesives used to increase the life span of the Rubber Rings.

We are manufacturing Wiresaw Rings in the following sizes:

Premier’ Rubber anti vibration mountings are used in a vast range of applications where the prime objective is to minimize vibration, reduce noise and absorb shock. The high internal isolating properties of rubber make them well suited for making anti vibration pads and mountings. A wide range of rubber anti vibration mountings is available.

The anti vibration pads and mounts are offered in different sizes and thickness in the industry and are highly admired by our clients for their superior quality, easy operations, and robust construction. Moreover, most of these anti vibration products are custom designed for our clients as per their needs and requirements.

Premier has a range of Anti Vibration Pads and Mountings suitable for various applications for both compression and shear applications.

• Premier STUDMOUNTS (Silent Blocks) for various applications
• Premier Rubber Mounts for damping Vertical vibrations
• Premier Horizontal Stops for damping horizontal vibrations
• Premier Rubber Pads.

Types of Rubber used -

• Natural Rubber
• Neoprene
• Silicone
• SBR
• EPDM

Types of Anti Vibration Mounts

• Cylindrical Mounts: Mountings usually for general low-cost applications. They are easy-to-install mounts, made of high-quality rubber and provided with mild steel connection plates.
• Technical Mounts: Rubber mounts providing a technical solution for reducing noise and vibration transmission and shock protection.
• Anti Vibration Pads & Plates: Plates, providing a good protection and decreasing the noise level in workshops.

Premier’s range of Flotation Cell Spares are designed and developed to retrofit Flotation Cells of various OEM’s in line with international quality standards, delivering superior quality and value.

Premier offers a wide range of flotation cells rubber spares for 40, 60, 100 & 300 CFT sizes and also AS 2-3 and AS 2-6 (SALA TYPE). These are designed to retrofit pumps of various OEMs and are fabricated as per the industrial standards to ensure high performance.

• Rubberised Impeller
• Rubberised Diffuser
• Wear Plate (disc)

We offer Hydrocyclone (Replaceable Liners) rubber spares:

• Inlet Head Liner
• Cone Liner
• Cylinder Liner
• Cover Plate Liner

Casing - Casings are made of cast high chrome alloy steel with rubber or metal lined option1-year-warranty

Impeller - Double suction impellers create low axial bearing loads, increasing bearing life. Impellers are available in rubber-lined and metal-lined option.

Lower Strainer - The lower strainers keep large foreign material entering the casing

Application - The rugged vertical slurry sump pump with either hard metal or rubber covering are suitable for the following applications:

• Minerals processing
• Coal preparation
• Industrial sand and Aggregate
• Power Plants
• Chemical processing
• Effluent handling

Features & Benefits 

• Cantilever design without submerged bearings or shaft seal
• High capacity double suction design
• Agitator option keeps solids in suspension
• Wear parts are available in variety of different material
• Optional recessed impeller for oversized material
• Open and semi-open impeller available
• SPR models features full rubber covering for corrosion resistance

2 1⁄2” Galighar Type Rubber Lined Vertical Pump.

Discharge: 30 M3/Hr.

Head: 20 Meter

Pedestal: 36” or 48" or 60" with Rubber Lined

M.O.C. of Casing: Rubber Moulded Casing Plate & Impeller

Method of Mounting: Motor on the top of Sump Pump

Motor Required: 15 HP

Premier is a leading manufacturer of Pinch Valve Sleeves / Muffs which are designed to retrofit valves for many leading OEMs. Rubber Sleeve of Pinch valves is available in a wide range of elastomer qualities including high-pressure sleeves, wear-resistant sleeves that outperform more expensive SS 316, satellite, or alloy ball, plug, globe, diaphragm valves in abrasive, scaling or corrosive services.

The collar of our rubber sleeve eliminates the use of any gasket. Our specially manufactured pinch valve rubber sleeves with multilayer reinforcement withstand the most chemically aggressive, corrosive service conditions at working pressure 25 Bar. The reinforced lugs on both sides of our rubber sleeve fixed to the pinching bars help retraction of rubber sleeve in vacuum service conditions. We offer a wide range of elastomer sleeves made from rubbers like Natural, Neoprene, EPDM, Butyl, SBR, Nitrile, Viton etc.

Premier offers a range of wheel chocks suitable for cars, caravans, trailers, medium to large HGVs, trucks, diggers, and aircraft. They are built to last with a durable blend of SBR/NR rubber and specific chemical composition, in line with the application. They offer a longer service life in comparison to plastic alternatives but are heavier to handle. Each chock comes with either an eye bolt, handle or rope to make help make handling easier.

Wheel Chock Size: 292 mm X 284 mm X 206 mm (Approx. Wt 9.5 Kg, comes with reflector tape and Rope Handle)

Skirt Rubber Pads are designed to seal the skirt at the loading station of the conveyor.

Skirt Rubber guided by the guide plate on one face and supported by serrated clamps plates on the other face ensures effective sealing to match the belt profile. We can offer in various sizes & specifications with different thicknesses of 10mm, 12mm, 14mm, 16mm, 18mm, and 20mm. Rubber Skirt Pad is used at feed points/discharge points of conveyor systems at the chute end to prevent material spillage. The skirt board rubber is of such hardness that it does not damage the belt even it is continuously rubbing the belt surface.

Premier Rubber Mills is engaged in manufacturing and supplying a wide gamut of Impact Idler Rubber Rings. To manufacture these rubber rings, we keep in consideration the specific requirements of our respectable customers. Moreover, we make sure that the consignments are timely delivered at clients’ destinations.

Our array of “Premier” Impact Idler Rings are manufactured with the aid of high-grade materials and advanced machinery. Due to the unsurpassed features such as quality, tear-wear strength, low maintenance, easy to operate, durability, etc., the entire range is highly demanded and appreciated among the customers. These rings are majorly used in conveyor idlers to secure the carrier belt from damages by the generated vibrations from hefty materials on it. Our clients can avail the complete range in various sizes, designs, and specifications as per their interests at market leading costs.

Features of Product:
• Meets the industrial quality standards
• Minimal lubrication and maintenance required
• Excellency in operation and long service life
• Can be accessible in customizes sizes
• Optimal Tensile Power
• Precision in Dimensions
• Dependability

Material: Nitrile Rubber, Silicone Rubber, Hyplon Rubber, Vulkalon Rubber, Natural Rubber, Neoprene Rubber, Viton Rubber, EPDM Rubber, Butyl Rubber.

Size: As per customer requirements

Premier manufactures a range of Slurry Pump Spares & Liners, interchangeable with various OEM designs & Part Numbers. Premier offers its clients a range of Slurry Pump Spares for various Warman Type pumps that are manufactured in compliance with international quality standards. These are designed to retrofit pumps of OEM Slurry Pump Spares and are available for various pump models and sizes according to the specific needs of our clients.

Rubber Impellers

Casing Liners

Throat Bush

Inlet Liner

Back Liner

Discharge Joint Ring

Intake Joint Ring

Premier is a leading manufacturer of Pinch Valve Sleeves / Muffs which are designed to retrofit valves for many leading OEMs. Rubber Sleeve of Pinch valves is available in a wide range of elastomer qualities including high-pressure sleeves, wear-resistant sleeves that outperform more expensive SS 316, satellite, or alloy ball, plug, globe, diaphragm valves in abrasive, scaling or corrosive services.

The collar of our rubber sleeve eliminates the use of any gasket. Our specially manufactured pinch valve rubber sleeves with multilayer reinforcement withstand the most chemically aggressive, corrosive service conditions at working pressure 25 Bar. The reinforced lugs on both sides of our rubber sleeve fixed to the pinching bars help retraction of rubber sleeve in vacuum service conditions. We offer a wide range of elastomer sleeves made from rubbers like Natural, Neoprene, EPDM, Butyl, SBR, Nitrile, Viton etc.