Other Products / Services #97291

Dymax Conformal coatings for printed circuit boards cure tack free in seconds upon exposure to UV/Visible light to help streamline manufacturing assembly processes. Apply, cure, and ship immediately and eliminate the time-consuming steps of traditional thermal-cure and room temperature-cure conformal coatings. Dymax conformal coatings are available for tin whisker mitigation, humid environments, and shadowed areas. They are electrically insulated so they can be applied over the entire PCB surface or in select areas to provide protection from service environments.

Solvent-free conformal coatings contain low VOCs, eliminating the need for solvent handling, while enhancing worker safety and minimizing environmental impact. Each conformal coating is one part (no mixing required) for easy dispensing.

speedmask light curing masking resins replace tape, wax, lacquers, and fixtures and offer reliable protection against most metal-finishing processing environments. Mask and seal all components in one step! the tenacious adhesion of speedmask uv/visible curable maskants seal and protect machined, ground, or polished surfaces during tumbling, peening, abrading, plating, plasma-spray coatings, or cleaning processes. Uv/visible cure speedmask masking resins also seal cooling cavity openings which prevent contamination from acid, alkaline, and plating solutions, as well as the debris from air plasma spray, hvof, peening, and grit blasting. These masking resins are solvent free allowing your manufacturing process to go green with the elimination of solvent lacquers.

dymax uv/visible light-curable masking resins, uv/visible curing lamps, and accessories bring efficiency and cost reduction to new parts manufacturing, overhaul and repair, turbine and metal finishing. These resins cure in seconds upon exposure to light and are easy to incorporate into automated systems. The speedmask masking resins are available in burn-off, peelable, and water soluble grades. These resins are easily removed and leave the surface residue free.

dymax speedmask masking resins contain no non-reactive solvents and cure in seconds, providing cost savings through reductions in labor, rework and scrap. They are preferred over traditional masking materials such as waxes, tapes, and lacquers due to ease of application, superior protection with consistent reliability, and fast cure time.