Our Products #4104000

We are associated with renowned transportation providers to ensure delivery of consignments is carried out without a glitch and in a timely manner. Keeping in compliance with the international standards, we ensure that the raw materials used for varied products are 100% certified and quality approved. This helps us in maintaining a set standard of our products.

Exclusive Features of our Buchholz Relay & Oil Surge Relay

• Body is made of single piece die cast aluminium alloy instead of casted CI body, in which micro cracks may give leakage at any time.
• No need to treat for porosity, since no micro cracks are developed.
• With mercury or magnetic reed switch; NO or NC contact as required.
• Built-in test facility for checking continuity of both - alarm and trip circuits.

Available in 3 sizes for pipe diameter:

• 25 mm (GOR - 1)
• 50 mm (GOR - 2)
• 80 mm (GOR - 3)
• Compact & hence, low weight design with high efficiency.
• We also manufacture Oil Surge Relays for protection of O.L.T.C.

We have developed a separate unit for keeping a large stock. This unit is managed and maintained by our adroit professionals and fulfills the ever-growing needs of the clients. Raw materials that we use for the production of the finished products are bottleneck assets and thus are highly essential. We strictly check the entire lot of raw materials before procurement.

Exclusive Features of our Bushings

• For all types of transformers such as power generation, distribution, booster, furnace, induction, locomotive, etc.
• For entire range of bushing ratings from 1 to 72 kV & 100 to 10, 000 Amps.
• As per IS / DIN / BS / customer's requirement.
• Many components made by forging or die-casting for dimensional accuracy & consistency coupled with mass production.
• We also make special and supporting components such as bushing clamps, supports, arcing horns, wiping glands, gaskets, sealing washers, hardware (nuts, bolts, plain & spring washers).
• In-house electro-plating plant gives guaranteed plating thickness.
• We supply entire assembly with bushing as ready-to-use kits, duly plated if required.

Our team members and quality auditors keep regular checks on the quality of products and thus, even the raw material used is tested under vigil supervision to ensure better quality products. We are associated with renowned transportation providers to ensure delivery of consignments is carried out without a glitch and in a timely manner.

Customers should stay rest assured with us for the payment procedures. They can pay us conveniently through wide-ranging payment mediums. We make sure the ranges of product we offer purchasers with are as per global quality management standards.

Exclusive Features of our L.V. Windings / Coils

• Made of solid copper flat, brazed with 43% silver brazing material.
• Requires less copeer as compared to conventional winding.
• Less chances of short circuit.
• Fitted with insulation and duly varnished.

This is due to our streamlined packaging system that we are able to meet the customized and standard packaging requirements of the clients. Moreover, we ensure complete safety of the products. The offered lot is in complete compliance with the industry standards thus, high in demand.

Exclusive Features of our Linear Tap Changer

• 3-phase switch, star-delta connection.
• No voltage operation, off-circuit operation.
• Used in mineral oil, silicon oil and askarel.
• Regulation 2.5% each position.

Available in 3-5-7 position for current rating:

• 20 to 30 kV
• 10 to 63 Amps.

Our prime interest is to deliver a flawless range of products to the buyers. And in this concern, we make all arrangements in order to store the entire lot under safe environment. Notable name in this field, we successfully cater to the demands of our clientele from Mumbai(India) to every nook and corner.

Exclusive Features of our Magnetic Oil Gauge

• Full body made out of Aluminium LM-6 Die Casting for zero leakage and better finish.
• Nitrophyl solid Float for Leak-proof float body.
• Gear teeth are completely Meshed for Smooth Movement of the pointer.
• Magnets are placed in a special manner to ensure complete Synchronization in their movement.
• UV proof pure Polyester powder-coated body finished with seven tank hot Chromatic cleaning process.
• Dial calibration and Alarm position can be set as per customer requirement.

We make available the products using the exceptional quality raw material that is experts certified. This makes our product range completely reliable and genuine. We are associated with renowned transportation providers to ensure delivery of consignments is carried out without a glitch and in a timely manner.

Exclusive Features of our Oil Drain Device

• We manufacture as per DIN 42551 in Brass & CI (Cast Iron) body.

• We offer complete range; 22mm, 31mm & 40mm nominal width.

• It does not leak even if oil temperature rises to 100 degree C .

We lay great stress on packaging and make sure the materials used for packs are industrial grade and superior. Each pack is labeled properly and it carries essential product details. We are highly acknowledged for delivering the orders within the stipulated time frame as we have excellent transit facility.

Exclusive Features of our Prismatic Oil Gauges

• We manufacture Complete Range for all Diameters of Conservator Tanks.
• We can also develop POG as per customer's design.

Customers highly prefer us because of our practice of delivering the orders in an organized condition and on time. We lay great stress on packaging and make sure the materials used for packs are industrial grade and superior. Each pack is labeled properly and it carries essential product details.

Detaills :

• Valve is equipped with a Butterfly Flap, which can be turned to Open and Close the valve.
• Valve remains in Open position when the transformer is in "On-load" condition.
• For Inspection and Repair of radiator, the Butterfly flap is closed and the Radiator is detached from the transformer.
• We manufacture Complete Range, from 50mm to 200mm.

Exclusive Features of our Radiator Valves :

• Our flap has an Angular Flat edge, as compared to the conventional V shape which has only line contact with the valve body. Flat edge ensures almost Zero leakage.
• Shell moulded, Shot blasted and Fettled CI casting (IS-210, Grade 200) for Zero body Leakage and better finish.
• Streamlined Flap design minimizes Frictional Resistance to fluid flow.
• No Rubber lining, yet leak proof.
• Valve is able to lock in "OPEN" and "SHUT" position by cap.

Our product is packed in industrial grade packages that are recyclable and provide protection to the products from physical and chemical damage. Additionally, the product is properly labeled to provide information. By guaranteeing complete security of the products, we make sure that our buyers remain satisfied with us. For this, we store the entire lot in our state-of-the-art warehouse.

Exclusive Features of our Silica Gel Breather

• Body and Oil Cup are made out of Transparent yet Unbreakable UV proof Polycarbon plastic, the best Engineering Plastic for Outdoor applications.
• Top and Bottom are made of CRCA sheet and Joined with body by specially designed Rubber gaskets and Studs.
• Protective Grill can be provided around Container on request.
• Gel removing and refilling method is specially designed to Avoid Skilled labor requirement at site to Replace the gel.
• Pipe connection can be Threaded - 1/2", 3/4", 1" BSP or Flange type.

This is due to our streamlined packaging system that we are able to meet the customized and standard packaging requirements of the clients. Moreover, we ensure complete safety of the products. In order to ensure product compliance with stated quality norms, we conduct several tests at several stages.

Exclusive Features of our Wheel (Roller) Assembly

• Full Assembly or only Wheel / Roller as per DIN 42561 & as per Customer Drawings & Specifications.

• Plain & Flanged Variety of Roller with Spoke & without Spoke.

• Initial Rust Proof Priming on Components & Final Top Coat of Colour.

• Finishing: Zinc plated, Powder coated or Galvanized, as required.

• Locking Mechanism can be provided on request.

• Complete Range from 100mm to 350mm.

We are associated with renowned transportation providers to ensure delivery of consignments is carried out without a glitch and in a timely manner. We make certain that the offered array of products is sternly tested for the raw material as well. This makes our offered array of products completely reliable and genuine.

With us, payment transactions will always remain secured as we follow reliable online payment gateway that is handled by a trusted e-commerce application service provider. In order to maintain high-quality standards in our offerings, we make use of the finest grade raw material. Also, we ensure that the material is sourced from the reliable places only.

Exclusive Features of our 1" & 2" Pressure Relief Valves

• Compact, Economical and highly reliable design.
• The short tail allows an easy placement for any portion of the cover.
• Bursting pressure adjustable from .22 to .70 Kg/sq. cm.
• Rugged Forged Brass body and Shutter with 1" and 2" BSP outer thread for Vertical and Horizontal mounting of the Tank.
• Center Rod is Made out of Brass to Ensure a Safe and Steady Service and a Long Life.
• Protection Built into the Cap in order to direct any Oil Spills Downward.
• The Valve can be used as filling Cap too.

Exclusive Features of our 3" & 6" Pressure Relief Valves

• Type 304 Stainless Steel Deep Drawn Diaphram with Spring Locator Convolutions.
• Specially designed reverse wound springs and Assemble methods provides uniform valve loading and Improved relief rates.
• Unique Spring retaining system on Diaphram and cover.
• All stainless steel fastners and hardware.
• Automatic Instantaneous Venting and Sealing.
• 100% Tested for Proper Operation and Serialized for Traceability.
• Pressure Die cast is porosity free.
• Aluminium flange and Cover are duly UV Proof Powder coated for better climate protection.
• IP 67 protected Switch with 1NO and 1NC contact.
• Brightly coloured flag, Integrated with switch, gives visual indication of valve operation by raising a flag.

With us, clients can stay assured for the quality of the products as we make use of the first class raw material that is tested on several measures prior to product manufacturing. Interested buyers can purchase Copper Conductors from us in bulk and retail, as we are its reputed supplier.

Exclusive Features of our Copper Conductors

• We use 100% Electrolytic Copper only.
• We manufacture as per IS / BS / ASTM standards.
• Wide production Range:

Flat / Strip :

• Width - 2 to 300 mm
• Thick - 0.7 to 60 mm
• Square - 4 to 60 mm
• Round  - Dia - 1.2 to 120 mm
• Hexagonal - A/F - 5 to 80 mm

Profile :

• Any shape as per customer drawings & specifications.
• We are exempted from Central Sales Tax.
• In-house Manufacturing and Testing facilities.