Post Buy Requirement
Prima Equipment
Vadodara, Gujarat, India
gstGST : 24AJKPS9568A1ZV Verified Add Review

Surveillance Systems

PSGM-1-D-AGS (CEMS-L-IS) Continuous Stack Gas Emission Monitoring System

PSGM-1-D-AGS (CEMS-L-IS) is a flameproof tunable laser gas analyzer for industrial online analysis and environmental on-line monitoring, which can in-situ analyze O2, CO, NH3, CO2, CH4, H2O, HCl, HF and other gases in various complex conditions. It consists of transmitter, receiver and connection box.

 

The transmitter drives the tunable diode to emit laser of certain wavelengths, which passes through the environment to be measured, then reaches the receiver. The receiver performs photoelectricity conversion, signal processing and spectrum data analysis to obtain the measuring result. The connection box contains I/O interface, making the connection of power cable and signal cable convenient.

 

Technology platforms either Extractive, Hot Extractive, Hot-Wet Extraction, Dilution or In-situ measurement system with Electrochemical, PID, NDIR, TDLAS (Laser), FID, UV-DOAS measurement technology.

 

Application :

  • Boiler, Furnace, Thermo Pack, Process, WetScrubber, Waste Incinerator.
  • Apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and de-nitration.
View Complete Details

PE-SPMMS-C91 (SM-1) Continuous PM Dust Opacity Emission Monitoring System

The SM-1 ON-LINE STACK OPACITY / SMOKE MONITOR is a Microprocessor based, PHOTOOBSCURITY monitor designed for the continuous monitoring of % OBSCURATION and calculated concentration in mg/m3, in chimneys and stacks.

 

The LIGHT SOURCE and PHOTO DETECTOR are mounted across the stack thusmonitoring smoke emissions in terms of % obscuration in the stack.This provides an aid to plant efficiency and safe guards you against illegal pollution ofthe atmosphere caused by excessive smoke and particulate matter discharge.The complete instrument comprises of the light source unit, the detector unit, thesignal processing unit and optionally an automatic air purge system.It is supplied with adjustable mounting fixtures.Special menu aids installer in aligning of detector with light source.

 

Application :

  • Boiler, Furnace, Thermo Pack, Process, WetScrubber, Waste Incinerator.
  • Apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and de-nitration.
View Complete Details

PSGM-1-D-AGS (CEMS-C) Continuous Stack Gas Emission Monitoring System

PSGM-1-D-AGS (CEMS-C) Continuous Emissions Monitoring system can monitor gases, including SO2, NOx, O2, dust, humidity, temperature, pressure, flow parameters, etc. In addition, also can monitor gases for a particular occasion such as HCI, HF, CO, CO2, NH3, H2S, Cl2, VOC, etc.

 

PRIMA is the only high and new technology Indian company witha full set of intellectual property rights of flue gas monitoring. Its independent research and development products include ultraviolet flue gas analyzer, dust monitor, temperature pressure flow, humidity meter, HCI analyzer, HF analyzer, pretreatment system, monitoring software, etc.

 

Technology platforms either Extractive, Hot Extractive, Hot-Wet Extraction, Dilution or In-situ measurement system with Electrochemical, PID, NDIR, TDLAS (Laser), FID, UV-DOAS measurement technology.

 

Application :

  • Boiler, Furnace, Thermo Pack, Process, WetScrubber, Waste Incinerator.
  • Apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and de nitration.
View Complete Details

PSGM-1-D-AGS (CEMS-HW-PF) Continuous Stack Gas Emission Monitoring System

PSGM-1-D-AGS series HW-PF online monitoring gas analyzer is an on-site installation Platform mounted gas analyzer which is developed after years reaching and design on online gas analysis instruments. It can monitor gas parameters, including concentration of SO2, NOx, O2, Dust, Humidity, Temperature, Pressure, Flow and etc. It is widely applied to tail gas emission monitoring and process analysis in many fields, including coal-fired power plant, waster-to-energy plant, cement factory, glass factory, lime factory, ceramics factory, sinter, coke oven, DeSOx process and DeNOx process.

 

PSGM-1-D-AGS series HW-PF online monitoring gas analyzer adopts 150° C. high temperature heat tracing for whole process, on-site filtering and sampling, on-site analysis and measuring technology. All paths contacting with gas are made of 316L stainless steel & PTFE. This gas analyzer has many transcendent features, such as low detection limit, accurate measuring result, easy to calibrate and compare, with simple construction and without any moving parts.

 

Application :

  • Boiler, Furnace, Thermo Pack, Process, WetScrubber, Waste Incinerator.
  • Apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and de-nitration.
View Complete Details

PSGM-1-D-AGS Continuous Stack Gas Emission Monitoring System

The PSGM-1-D-AGS Flue Gas version range of analyzers use multiple sensor technology to measure the levels of Sulphur Dioxide (SO2), Nitrogen Oxides (NO), Nitrogen Dioxide (NO2), Carbon Monoxide (CO) and Oxygen (O2) in flue gas of Boiler / Furnace / Thermo pack Stack gas emission.



SO2, NO, NO2, NOX (NO + NO2), CO, O2



The PSGM-1-D-AGS Process Gas version range of analyzers use multiple sensor technology to measure the levels of Sulphur Dioxide (SO2), Nitrogen Oxides (NO), Nitrogen Dioxide (NO2), Carbon Monoxide (CO), Chlorine (CL2), Hydrochoric Acid gas (HCL), Hydrogen Cynide (HCN), Hydrogen Fluoride (HF), Hydrogen Sulphide (H2S), Ammonia (NH3) and other gases on request of Process / Scrubber / Incinerator Stack emission.



SO2, NO, NO2, CO, CL2, HCL, HCN, HF, H2S, NH3 etc.



Application :



  • Boiler, Furnace, Thermo Pack, Process, WetScrubber, Waste Incinerator.

  • Apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and denitration.

View Complete Details

PE-SPMMS-C91 Continuous PM Dust Opacity Emission Monitoring System

works on in-situ methodology. continuous spm monitoring system is designed & built ontriboelectric effect. this is a phenomenon which occurs when moving solid particulate matterscomes into contact with the sensor. this phenomenon being essentially molecular, the process isvery repeatable. this method of sensing yields very accurate and highly reliable results, since thesignal generated is directly proportional to the mass flow rate. in fact triboelectric technology is theonly one available around the world which senses solid flows directly. radioactive, laser and opticalmethods are indirect as they are based on the principles of absorption of one or the other form ofenergy.



the spmms-c91 range of dust monitors uses tribo-electric technology dc sensor.this type is fundamental sensor of mass flow and can be calibrated directly in units of gm/sec orkg/hr. dc sensors have a linear response to mass flow over a wide range of gas velocities.these devices provide a simple low-cost mass flow measurement that, unlike mass concentrationmeasurement, requires no further normalization to deliver an absolute measurement ofenvironmental impact. signal generation is proportional to mass flow of solids / solid particulatematter across the sensor.



mass flow, however, is an absolute standard. it provides a measurement of total mass emission froma source and used as a direct assessment of environmental impact. it is valid for any type ofprocess, combustion or non-combustion and may be considered as being the most relevantreporting method.



the dc tribo-electric probes system is proportional to mass flow. the probe is linearly proportionalto mass flow and thus offers a simple low-cost solution to dust emission monitoring, by providing measurement of the environmental impact of any emission source.



application :



  • boiler, furnace, thermo pack, process, wetscrubber, waste incinerator.

  • apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and de-nitration.

View Complete Details

PE-SPMMS-C91 (LBS) Continuous PM Dust Opacity Emission Monitoring System

PE-SPMMS-C91 (LBS) is an on-line dust monitoring device using the mainstream technology of laser back-scattered light principle with imported core components. Mainly used for continuous monitoring of various sources emissions of particulate matter concentrations. It can be either equipped with CEMS, or connected with dust monitoring network by a shared set of data acquisition and processing background.

 

It is available for the monitoring and control of soot emission, flue gas DeSOx and removal of dust for power generation boilers, industrial furnaces, industrial boilers in the thermal power, iron and steel metallurgy, petrochemical, chemical, cement production, ceramics, waste incineration, etc.

 

Application :

  • Boiler, Furnace, Thermo Pack, Process, WetScrubber, Waste Incinerator.
  • Apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and de-nitration.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Pritesh M. Shah (Prima Equipment)
  • 21, 3rd Floor, Lohana Building, Raopura., Vadodara, Gujarat - 390001
  • http://www.primaequipment.in
  • Share us via
  • Call 08069247353 Ext. 568
Retailer of Surveillance Systems from Vadodara, Gujarat by Prima Equipment
Post Buy Requirement
Prima Equipment
Vadodara, Gujarat, India
gstGST : 24AJKPS9568A1ZV Verified Add Review

Surveillance Systems #3185195

PSGM-1-D-AGS (CEMS-L-IS) Continuous Stack Gas Emission Monitoring System

PSGM-1-D-AGS (CEMS-L-IS) is a flameproof tunable laser gas analyzer for industrial online analysis and environmental on-line monitoring, which can in-situ analyze O2, CO, NH3, CO2, CH4, H2O, HCl, HF and other gases in various complex conditions. It consists of transmitter, receiver and connection box.

 

The transmitter drives the tunable diode to emit laser of certain wavelengths, which passes through the environment to be measured, then reaches the receiver. The receiver performs photoelectricity conversion, signal processing and spectrum data analysis to obtain the measuring result. The connection box contains I/O interface, making the connection of power cable and signal cable convenient.

 

Technology platforms either Extractive, Hot Extractive, Hot-Wet Extraction, Dilution or In-situ measurement system with Electrochemical, PID, NDIR, TDLAS (Laser), FID, UV-DOAS measurement technology.

 

Application :

  • Boiler, Furnace, Thermo Pack, Process, WetScrubber, Waste Incinerator.
  • Apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and de-nitration.
View Complete Details

PE-SPMMS-C91 (SM-1) Continuous PM Dust Opacity Emission Monitoring System

The SM-1 ON-LINE STACK OPACITY / SMOKE MONITOR is a Microprocessor based, PHOTOOBSCURITY monitor designed for the continuous monitoring of % OBSCURATION and calculated concentration in mg/m3, in chimneys and stacks.

 

The LIGHT SOURCE and PHOTO DETECTOR are mounted across the stack thusmonitoring smoke emissions in terms of % obscuration in the stack.This provides an aid to plant efficiency and safe guards you against illegal pollution ofthe atmosphere caused by excessive smoke and particulate matter discharge.The complete instrument comprises of the light source unit, the detector unit, thesignal processing unit and optionally an automatic air purge system.It is supplied with adjustable mounting fixtures.Special menu aids installer in aligning of detector with light source.

 

Application :

  • Boiler, Furnace, Thermo Pack, Process, WetScrubber, Waste Incinerator.
  • Apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and de-nitration.
View Complete Details

PSGM-1-D-AGS (CEMS-C) Continuous Stack Gas Emission Monitoring System

PSGM-1-D-AGS (CEMS-C) Continuous Emissions Monitoring system can monitor gases, including SO2, NOx, O2, dust, humidity, temperature, pressure, flow parameters, etc. In addition, also can monitor gases for a particular occasion such as HCI, HF, CO, CO2, NH3, H2S, Cl2, VOC, etc.

 

PRIMA is the only high and new technology Indian company witha full set of intellectual property rights of flue gas monitoring. Its independent research and development products include ultraviolet flue gas analyzer, dust monitor, temperature pressure flow, humidity meter, HCI analyzer, HF analyzer, pretreatment system, monitoring software, etc.

 

Technology platforms either Extractive, Hot Extractive, Hot-Wet Extraction, Dilution or In-situ measurement system with Electrochemical, PID, NDIR, TDLAS (Laser), FID, UV-DOAS measurement technology.

 

Application :

  • Boiler, Furnace, Thermo Pack, Process, WetScrubber, Waste Incinerator.
  • Apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and de nitration.
View Complete Details

PSGM-1-D-AGS (CEMS-HW-PF) Continuous Stack Gas Emission Monitoring System

PSGM-1-D-AGS series HW-PF online monitoring gas analyzer is an on-site installation Platform mounted gas analyzer which is developed after years reaching and design on online gas analysis instruments. It can monitor gas parameters, including concentration of SO2, NOx, O2, Dust, Humidity, Temperature, Pressure, Flow and etc. It is widely applied to tail gas emission monitoring and process analysis in many fields, including coal-fired power plant, waster-to-energy plant, cement factory, glass factory, lime factory, ceramics factory, sinter, coke oven, DeSOx process and DeNOx process.

 

PSGM-1-D-AGS series HW-PF online monitoring gas analyzer adopts 150° C. high temperature heat tracing for whole process, on-site filtering and sampling, on-site analysis and measuring technology. All paths contacting with gas are made of 316L stainless steel & PTFE. This gas analyzer has many transcendent features, such as low detection limit, accurate measuring result, easy to calibrate and compare, with simple construction and without any moving parts.

 

Application :

  • Boiler, Furnace, Thermo Pack, Process, WetScrubber, Waste Incinerator.
  • Apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and de-nitration.
View Complete Details

PSGM-1-D-AGS Continuous Stack Gas Emission Monitoring System

The PSGM-1-D-AGS Flue Gas version range of analyzers use multiple sensor technology to measure the levels of Sulphur Dioxide (SO2), Nitrogen Oxides (NO), Nitrogen Dioxide (NO2), Carbon Monoxide (CO) and Oxygen (O2) in flue gas of Boiler / Furnace / Thermo pack Stack gas emission.



SO2, NO, NO2, NOX (NO + NO2), CO, O2



The PSGM-1-D-AGS Process Gas version range of analyzers use multiple sensor technology to measure the levels of Sulphur Dioxide (SO2), Nitrogen Oxides (NO), Nitrogen Dioxide (NO2), Carbon Monoxide (CO), Chlorine (CL2), Hydrochoric Acid gas (HCL), Hydrogen Cynide (HCN), Hydrogen Fluoride (HF), Hydrogen Sulphide (H2S), Ammonia (NH3) and other gases on request of Process / Scrubber / Incinerator Stack emission.



SO2, NO, NO2, CO, CL2, HCL, HCN, HF, H2S, NH3 etc.



Application :



  • Boiler, Furnace, Thermo Pack, Process, WetScrubber, Waste Incinerator.

  • Apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and denitration.

View Complete Details

PE-SPMMS-C91 Continuous PM Dust Opacity Emission Monitoring System

works on in-situ methodology. continuous spm monitoring system is designed & built ontriboelectric effect. this is a phenomenon which occurs when moving solid particulate matterscomes into contact with the sensor. this phenomenon being essentially molecular, the process isvery repeatable. this method of sensing yields very accurate and highly reliable results, since thesignal generated is directly proportional to the mass flow rate. in fact triboelectric technology is theonly one available around the world which senses solid flows directly. radioactive, laser and opticalmethods are indirect as they are based on the principles of absorption of one or the other form ofenergy.



the spmms-c91 range of dust monitors uses tribo-electric technology dc sensor.this type is fundamental sensor of mass flow and can be calibrated directly in units of gm/sec orkg/hr. dc sensors have a linear response to mass flow over a wide range of gas velocities.these devices provide a simple low-cost mass flow measurement that, unlike mass concentrationmeasurement, requires no further normalization to deliver an absolute measurement ofenvironmental impact. signal generation is proportional to mass flow of solids / solid particulatematter across the sensor.



mass flow, however, is an absolute standard. it provides a measurement of total mass emission froma source and used as a direct assessment of environmental impact. it is valid for any type ofprocess, combustion or non-combustion and may be considered as being the most relevantreporting method.



the dc tribo-electric probes system is proportional to mass flow. the probe is linearly proportionalto mass flow and thus offers a simple low-cost solution to dust emission monitoring, by providing measurement of the environmental impact of any emission source.



application :



  • boiler, furnace, thermo pack, process, wetscrubber, waste incinerator.

  • apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and de-nitration.

View Complete Details

PE-SPMMS-C91 (LBS) Continuous PM Dust Opacity Emission Monitoring System

PE-SPMMS-C91 (LBS) is an on-line dust monitoring device using the mainstream technology of laser back-scattered light principle with imported core components. Mainly used for continuous monitoring of various sources emissions of particulate matter concentrations. It can be either equipped with CEMS, or connected with dust monitoring network by a shared set of data acquisition and processing background.

 

It is available for the monitoring and control of soot emission, flue gas DeSOx and removal of dust for power generation boilers, industrial furnaces, industrial boilers in the thermal power, iron and steel metallurgy, petrochemical, chemical, cement production, ceramics, waste incineration, etc.

 

Application :

  • Boiler, Furnace, Thermo Pack, Process, WetScrubber, Waste Incinerator.
  • Apply to the emission monitoring and process analysis of powerplant, cement, glass, limefactory, ceramicsfactory, sinter, coke oven, de-sulfurization, and de-nitration.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Pritesh M. Shah (Prima Equipment)
  • 21, 3rd Floor, Lohana Building, Raopura., Vadodara, Gujarat - 390001
  • http://www.primaequipment.in
  • Share us via
  • Call 08069247353 Ext. 568