Our Products
Drill rod handling:15 feet (4.5 meter) - 20 feet (6.0 meter)
Drilling depth :1, 000 feet (300 meters)
Drilling diameter:6.5 inch (165 mm) - 12.25 inch (311 mm)
Pull up force: 11, 200 kgf
Drill head torque: 600 kg.m
Air compressor: 1, 100 cfm/300 psi
Mud pump: 700 lpm-1, 000 lpm
Carrier: Truck(Optional: Skid)
www.prime-rigs.com
Additional Information:
Payment Terms : T/T
Packaging Details : standard & export packing
Delivery Time : 6 to 8 weeks
Technical Specification
Prime Mover: Truck | |
Make | Ashok Leyland |
Drive | 6 x 4 |
Gross Vehicle weight | 25 MT |
Engine Rating | 230 HP @ 2400 rpm |
Air Compressor | |
Make | ELGI / Atlas Copco |
CFM | 1100 |
PSI | 300 (20.8 Bar) |
Drill Depth | |
Maximum Depth | 300Meters(1000Feet) |
Rod Handling | 4.5 inch(15Feet) |
Hole Diameter | |
DTH | 152 – 254mm(6″- 10″) |
Rotary | 152 – 350mm(6”-14”) |
Mud Pump | |
Make | G & / Lakshmi |
Stroke | 150mm |
Liner Size | 150mm |
Mast | |
Max Capacity | 18 tons (39600 lbs) |
Height | 8.0 mtr (27 ft) |
Rod handling capacity | 6.0 mtr (20 ft) |
Main Hoist Assembly | |
Line Pull ( Bare Drum) | 3000 Kgf |
Max Line Speed | 40 M/Minute |
Wire Dia | 16 mm |
Drive | Hydraulic |
Feed System | |
Pull Up | 11,500 Kgf |
Pull Down | 6,000 Kgf |
Hoisting Speed | 6,000 Kgf |
Water Injection Pump | |
Max Flow | 56 LPM |
Max Pressure | 30 kg/cm2 |
Auxiliary Winch | |
Bare Drum Pull | 1000 Kgf |
Max Speed | 20 M/Minute |
Hydraulic Circuit | |
Max Operating Pressure | 220 kg/cm2 |
Hydraulic Tank Capacity | 600 Litres |
Filtration Non –Returnline | 10/25 Microns |
Rotary Head | |
Torque | 600 Kg-M |
Rotation Speed | 1 -100 Rpm |
Cylinders | |
Stabilizing Cylinders 4 Nos | 125 mm(Bore), 610 mm(Stroke) |
Mast Raising Cylinder | 100 mm(Bore), 800 mm(Stroke) |
Feed Cylinder | 140 mm(Bore), 2350 mm(Stroke) |
Break out Wrench | 80 mm(Bore), 300 mm(Stroke) |
RH Slide Out Cyliner | 80 mm(Bore), 450 mm(Stroke) |
the pdthr-600 skid drill rig is capable for water well drilling application in rock and soft formation.it's simple and compact design, excellent performance, high accessibility and reliability at affordable cost in its class. The pdthr-600 rig can be mounted on local truck matching the rig to the terrain it will be used. Can be used for mud rotary drilling
key features
manufacture and supply of prl make pdthr-350truck mounted hydraulically operated dth cum rotary drill rig capable of drilling maximum 8" by dth and 12 by rotary operation under favorable conditions.
truck: ashok leyland (6x4)
air compressor: elgi
model: 1200cfm / 350 psi
.Additional Information:
Payment Terms : T/T
Packaging Details : Standard packing and delivery
Delivery Time : 3-4 weeks
manufacture and supply of prl make pdthr-200 refurbished truck mounted hydraulically operated dth cum rotary drill rig capable of drilling maximum 8" by dth and 10 by rotary operation under favorable conditions.
.Additional Information:
Payment Terms : T/T
Packaging Details : standard packing and delivery
Delivery Time : 3-4 weeks
Manufacture and Supply of PRL Make PDTHR-300 Truck Mounted hydraulically operated DTH Cum Rotary drill rig capable of drilling Maximum 8" by DTH and 12 by Rotary operation under favorable conditions.
Additional Information:
Payment Terms : T/T
Packaging Details : Standard Packing and Delivery
Delivery Time : 3-4 weeks
manufacture and supply of prl make ptbw-150 tractor mounted hydraulically operated dth cum rotary drill rig capable of drilling max 6 by dth up to a depth of 150 meters and 8 by rotary up to a depth of150mtrs.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : standing Exports and Packings
Delivery Time : 3-4 weeks
manufacture and supply of prl make pdthr-350truck mounted hydraulically operated dth cum rotary drill rig capable of drilling maximum 10 by dth and 12 by rotary operation under favorable conditions.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : standard packing
Delivery Time : 3-4 weeks
manufacture and supply of prl make pdthr-450truck mounted hydraulically operated dth cum rotary drill rig capable of drilling maximum 10 by dth and 12 by rotary operation under favorable conditions.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : standard packing
Delivery Time : 3-4 weeks
Manufacture and Supply ofPRLMakePDTHR-350Truck Mounted hydraulically operatedDTH Cum Rotary drill rigcapable of drilling Maximum10by DTH and12by Rotary operation under favorable conditions.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : standard packing
Delivery Time : 3-4 weeks
standard packing
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : standard packing
Delivery Time : 3-4 weeks
manufacture and supply ofprlmakepdthr-150truck mounted hydraulically operateddth cum rotary drill rigcapable of drilling maximum8by dth and10by rotary operation under favorable conditions.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : standard packing
Delivery Time : 3-4 weeks
Manufacture and Supply ofPRLMakePDTHR-300Truck Mounted hydraulically operatedDTH Cum Rotary drill rigcapable of drilling Maximum10"by DTH and12by Rotary operation under favorable conditions.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard Packing
Delivery Time : 3-4 weeks
Manufacture and Supply of PRL Make PTPR Tractor Mounted hydraulically operated Auger drill rig capable of drilling maximum up to 18" dia up to a depth of 3 meter.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard Packing
Delivery Time : 3-4 weeks
manufacture and supply of prl make pdthr-300 refurbished truck mounted hydraulically operated dth cum rotary drill rig capable of drilling maximum 10 by dth and 12 by rotary operation under favorable conditions
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard Packing
Delivery Time : 3-4 weeks
manufacture and supply of prl make pdthr-300 refurbished truck mounted hydraulically operated dth cum rotary drill rig capable of drilling maximum 10 by dth and 12 by rotary operation under favorable conditions
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : standard packing
Delivery Time : 3-4 weeks
manufacture and supply of prl make pdthr-300truck mounted hydraulically operated dth cum rotary drill rig capable of drilling maximum 10 by dth and 12 by rotary operation under favorable conditions.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard Packing
Delivery Time : 3-4 weeks
Manufacture and Supply of PRL Make PDTHR-300 Refurbished Truck Mounted hydraulically operated DTH Cum Rotary drill rig capable of drilling Maximum 10 by DTH and 12 by Rotary operation under favorable conditions.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard Packing
Delivery Time : 3-4 weeks
Model PCDR - 100, Trolley mounted Top Head drive hydraulically operated drill Rig is capable of drilling in any kind of medium to hard rock formation to extract mineral samples by core drilling method up to a maximum depth of 100 Meters. Under favorable drilling conditions. The following are the detailed specifications.
Key Features :
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : STANDARD AND EXPORT PACKAGING
Delivery Time : 4-6 week
Technical Specification
Diamond Core Drilling | ||||
---|---|---|---|---|
Core Barrel Diameter | BQ/NQ/PQ series | |||
Depth | 330 feet / 100 meters | |||
Core Diameter | 55.6mm | |||
Drill Hole Diameter | 73.0mm | |||
Angle of Drilling | 45° – 90° | |||
Trolley | ||||
Two Wheel Dummy | Trolley of 6 Ton Capacity. | |||
Tyre | 9.00 X 16 PR | |||
Prime Mover | A separate Diesel Driven Deck Engine. | |||
Engine capacity | 50 hp @ 1500 RPM | |||
Application | Alluvial to Hard Soil Formation for Mineral Extraction, Soil Sampling, and Geo – Mineral resources survey etc. | |||
Mast | Sturdy structural channel mast structure electrically welded. | |||
Mast Overall Length – 5,200mm | ||||
Rotary Head Travel – 3,500mm | ||||
Feed System | Feed & Hoist using pulley, wire rope and hydraulic cylinder. | |||
Feed Cylinder Size | Ø100 mm | |||
Stroke | 1750 mm | |||
Max. Pull up force | 7,200kg-f | |||
Max. Pull down force | 3,600kg-f | |||
Reeving Ratio | 01:02:00 AM | |||
Maximum Pull up speed | 30m/min | |||
Rotary Head | Dual Speed Rotary Head Gear Box with variable Speed | |||
Stage – 1 | Stage – 2 | |||
Torque | 0 – 60 kg-m | 0 – 280 kg-m | ||
Rotation Speed | 0 – 600 RPM | 0 – 150 RPM | ||
Hydraulic System | ||||
Maximum Working Pressure | 210 kg/cm2 | |||
Capacity | 300 Liters | |||
Triplex Water | ||||
Max. Flow Rate | 120 LPM | |||
Injection Pump | ||||
Max. Pressure | 40kg/cm2 | |||
Hydraulically Driven Triplex Water Injection pumps for injecting Water / Foam with necessary piping and flow control valves. | ||||
Mast Rising Cylinder | ||||
Cylinder Size | Ø100 mm | |||
Max. Pressure | 40kg/cm2 | |||
The System is provided with a mast rising Cylinder for raising & Lowering of the Mast. | ||||
Mast Rising Cylinder | ||||
Cylinder Size | Ø100 mm | |||
Stroke | 700 mm | |||
The System is provided with a mast rising Cylinder for raising &Lowering of the Mast. | ||||
Levelling Stabilizers | ||||
Cylinder Size | Ø100 mm | |||
Stroke | 610 mm | |||
Foot mounted type hydraulic levelling jacks | ||||
The above jacks are provided with “reverse flow restricted valves” to ensure safe operation. | ||||
Dump Cylinder | ||||
Cylinder Bore | Ø100 mm | |||
Stroke | 1250 mm | |||
The drill rig is equipped with dumping cylinder for tilting of the Mast for angular drilling. | ||||
Wire Line Winch | ||||
Line Pull(Bare Drum) | 1,000 kgf | |||
Max. Line Speed | 40 meters/min | |||
Wire Diameter | 5mm | |||
Drive | Hydraulic Motor | |||
The Rig is provided with a hydraulic winch for Handling of Drill Pipes. | ||||
Main Winch | ||||
Line Pull(Bare Drum) | 3,000 kgf | |||
Max. Line Speed | 20 meters/min | |||
Wire Diameter | 16mm | |||
Drive | Hydraulic Motor | |||
The Rig is provided with a hydraulic winch for Handling of casing Pipes. |
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : standard packing and delivery
Delivery Time : 3-4 weeks
supply of crawler mounted hydraulically operated model pbhd 30, dth drilling rig capable of drilling maximum dia150 mm by dth operation up to a depth of 30 meters under favorable conditions.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : standing Exports and Packings
Delivery Time : 3-4 weeks
The PDTHR-300 drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PDTHR-300 rig’s flexibility means it can be mounted on single truck version, two truck versions and on local truck matching the rig to the terrain it will be used. Can be used for both DTH and mud rotary drilling
Optional: Skid mounting
Key features:
Proven technology ensures easy maintenance and more productive.
The rig can be customize as per customer requirement
Drill rod handling: 15 feet (4.5 meter) - 20 feet (6.0 meter)
Drilling depth: 1, 000 feet (300 meters)
Drilling diameter: 6.5 inch (165 mm) - 12.25 inch (311 mm)
Pull up force: 11, 200 kgf
Drill head torque: 600 kg.m
Air compressor: 1, 100 cfm/300 psi
Mud pump: 700 lpm-1, 000 lpm
Carrier: Truck(Optional: Skid)
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : STANDARD AND EXPORT PACKAGING
Delivery Time : 3-4 week
note: this offer only for export.in us$ 140, 000.00
the pdthr drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The pdthr-200 rigs flexibility means it can be mounted on single truck version, two truck versions and on local truck matching the rig to the terrain it will be used. Can be used for both dth and mud rotary drilling
optional: skid mounting
key features:
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : STANDARD AND EXPORT PACKAGING
Delivery Time : 4-6 week
Manufacture and Supply of PRL Make PDTHR-300 Man Truck Mounted hydraulically operated DTH Cum Rotary drill rig capable of drilling Maximum 10" by DTH and 12 by Rotary operation under favorable conditions. |
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard Packing
Delivery Time : 3-4 weeks
Manufacture and Supply of PRL Make PDTHR-300 ManTruck Mounted hydraulically operated DTH Cum Rotary drill rig capable of drilling Maximum 10 by DTH and 12 by Rotary operation under favorable conditions.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard Packing
Delivery Time : 3-4 weeks
manufacture and supply of prl make pdthr-450truck mounted hydraulically operated dth cum rotary drill rig capable of drilling maximum 10 by dth and 12 by rotary operation under favorable conditions
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard Packing
Delivery Time : 4-6 week
only mounting scope of prl make pdthr300 mounted hydraulically operated dth cum rotary combination drill rig capable of drilling 10by dth and 12 rotary up to a depth of 300 meters under favorable conditions
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard Packing
Delivery Time : 3-4 weeks
prl make 30 meters depth water well drilling rig with drilling depth 30 meters and 250mm diameter.
Additional Information:
Payment Terms : T/T
Packaging Details : standard packing
Delivery Time : 3-4 weeks
Max 14000.00$
Drill rod handling: 10 feet (3.0 meter) - 15 feet (4.5 meter)
Drilling depth: 650 feet (200 meters)
Drilling diameter: 4.5 inch (114 mm) - 8 inch (203 mm)
Pull up force: 5, 000 kgf
Drill head torque: 255 kg.m
Air compressor: 600 cfm/200 psi
Mud pump: 300 lpm - 500 lpm
Carrier: Truck(Optional: Skid)
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard Exports and Packing
Delivery Time : 3-4 weeks
The pdr-300 drill rig is ideal for water well drilling application in soft formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The pdr-300 rig’s flexibility means it can be mounted on single truck version and on local truck matching the rig to the terrain it will be used. Can be used for mud rotary drilling.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : STANDARD AND EXPORT PACKAGING
Delivery Time : 4-6 week
Technical Specification
Capacity | Rotary Drilling |
Drill hole diameter 12 ¼ inch (311 mm) | |
Maximum depth Up to 300 Meters. | |
Drill rod diameter 4 ½ inch (114.3 mm) | |
Drill rod length 20 feet (6 meter) | |
Carrier | Truck for the mounting of drill rig and Mud Pump |
Make Ashok Leyland or any other equivalent Make & Model | |
Gross Vehicle Weight | 16.0 Ton |
(One rear axle driven and one front axle dummy.) | |
Engine Rating | 160ps @ 2400rpm |
Prime Mover | The system shall be powered from the same truck Engine with PTO arrangement through a Transfer Gear Box. |
Mounting Platform Structure | Electrically welded steel structure covered with Chequered sheet. |
Mounting Platform Structure | Electrically welded steel structure covered with Chequered sheet. |
Mast Assembly | Sturdy structural Channel mast structure electrically welded. |
Mast overall length | 8,800 mm |
Rotary Head travel | 7,050 mm |
Centralize opening | 14 inch (356 mm) |
Raising and Lowering by Hydraulic Cylinder | |
Feed System | Feed & Hoist actuation: Pulley, Wire rope & Hydraulic cylinder. |
Mast overall length | 8,800 mm |
Rotary Head travel | 7,050 mm |
Centralize opening | 14 inch (356 mm) |
Raising and Lowering by Hydraulic Cylinder | |
Feed System | Feed & Hoist actuation: Pulley, Wire rope & Hydraulic cylinder. |
Feed cylinder Size & stroke Dia | 140mm X Dia 100mm X 2350mm long |
Pull Back | 12,000 Kg-f |
Pull Down | 5,500 Kg-f |
Hoisting speed (up) | 30 meter/ minute |
Reeving Ratio | 01:03:00 AM |
Having adequate travel to handle drill pipes and casing pipes up to 6 meter long. | |
Feed system consists of hold back arrangement to control limit weight on bit, rapid and slow feed arrangement to suit variable ground condition. | |
Rotary Head Assembly | |
(Top Head Drive) Fabricated steel body with spur gear reduction and oil bath type gear box. | |
Torque 360 kg-m | |
Rotation Speed Spindle RPM : 0-100 | |
The RH unit travels on Mast assembly to absorb sudden shock loads encountered during drilling operation. | |
Rotation Speed Spindle RPM : 0-100 | |
Hydraulics | The entire Equipment is designed to operate at high temperature encountered in the normal weather conditions. |
Open loop circuit with fixed displacement/variable displacement piston pumps and proportional valves for feed and rotation. Diverted valves for auxiliary drives. | |
Max operating pressure 220 Kg/Cm² | |
Hydraulic Tank capacity 600 Liters. | |
Filtration (Nom) – Return line 10/25 Microns | |
Cooling: Fin type oil to Air. | |
Control Panel | All necessary control and monitoring valves and gauges are installed at control panel located nearer to drilling point for driller convenience. |
Auxiliary | |
Stabilizer | Hydraulically operated Box type |
Cylinder bore diameter | 125 mm |
Stroke | 700 mm |
No. of Jacks | 4 Nos. |
The above jacks are provided with ‘reverse flow restricted’ valves to ensure safe operation. | |
Two rear jacks are operated with two separate valves and Two front jacks are operated with a single valve. | |
Mast raising Cylinder | For raising and lowering the Mast Assembly |
Cylinder bore diameter | 125 mm |
Stroke | 800mm |
Break out Wrench Cylinder | The drill rig is equipped with hydraulic operated break out wrench for making and breaking the drill pipes and Hammer. |
Cylinder bore diameter | 80 mm |
Stroke | 300 mm |
Break out Wrench Cylinder | The drill rig is equipped with hydraulic operated break out wrench for making and breaking the drill pipes and Hammer. |
Cylinder bore diameter | 80 mm |
Stroke | 300 mm |
Mud Pump | Screw Pump type hydraulically driven mud Pump required for mud rotary drilling. |
The pump is suitable for handling clear water, mud and bentonite solutions | |
Max Flow | 765 liter / minute |
Max. Pressure | 15.4 kg/cm² |
Single Rod Changer With 1Ton | Winch Hydraulically operated winch to handle the Drill pipes, tools and other accessories |
Bare drum-Pull | 1000 kg-f |
Max. Speed | 20 meter/minute |
Paint | Epoxy & Polyurethane Paint |
High quality Polyurethane paints are used for the rigs to achieve more life for the equipment following the global standard procedures for the surface preparations like Shot Blasting and Primer coating. |
The PDTHR-300 drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PDTHR-300 rigs flexibility means it can be mounted on single truck version, two truck versions and on local truck matching the rig to the terrain it will be used. Can be used for both DTH and mud rotary drilling
Key features
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 3-4 week
PDTHR-300(REFURBISHED) Truck mounted Dth Cum Rotary Drill Rig Manufacture and Supply PHEL Make PDTH-200 REFURBISHED Truck Mounted hydraulically operated DTH drilling rig capable of drilling dia 8" by DTH up to the depth of 200 meters.
Details
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard and export packaging
Delivery Time : 3 TO 4 WEEK
The pdthr-1000 drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The pdthr-1000 rig’s flexibility means it can be mounted on two truck versions and on local trucks matching the rig to the terrain it will be used. Can be used for both dth and mud rotary drilling.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard Packing
Delivery Time : 4-6 week
The PDTHR-450 drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. Can be used for both DTH and mud rotary drilling.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard Export & Packing
Delivery Time : 4-6 week
We are the leading manufacturers of Wagon Drilling rig.Use for Water well
Technical Specification :
Hole Diameter | Dia 3” |
Depth | 30Meters |
Carrier | Skid Mounted |
Air Compressor | 493 cfm @ 203 psi Trolley Mounted |
Application | Water Well |
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : STANDARD AND EXPORT PACKAGING
Delivery Time : 4-6 week
NOTE: This offer only for exporters without compressor. in US$9500.00
Technical Specification :
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard export & Packing
Delivery Time : 4-6 weeks
technical specifications:
make | ashok leyland |
drive | 6 x 4 |
gross vehicle weight | 25 mt |
engine rating | 230 hp @ 2400 rpm |
make | elgi / atlas copco |
cfm | 1200 |
psi | 350 (20.8 bar) |
maximum depth | 400meters |
rod handling | 4.5 inch(15feet) |
dth | 152 254mm(6- 10) |
rotary | 152 350mm(6-12) |
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : STANDARD AND EXPORT PACKAGING
Delivery Time : 4-6 Weeks
Manufacture and Supply of PRL Make PDTHR-400Truck Mounted hydraulically operated DTH Cum Rotary drill rig capable of drilling Maximum 10" by DTH and 12 by Rotary operation under favorable conditions.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : standing Exports and Packings
Delivery Time : 3-4 weeks
Manufacture and Supply of PRL Make, PDTH-100 Skid Mounted Pneumatically operated Inwell Type DTH drill rig capable of drilling 4 1/2" with DTH up to a depth of 100 meters
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard Packing
Delivery Time : 3-4 weeks
manufacture and supply ofprlmakepdthr-200 stalliontruck mounted hydraulically operateddth cum rotary drill rigcapable of drilling maximum8"by dth and12by rotary operation under favorable conditions.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard Packing
Delivery Time : 3-4 weeks
The PDTHR-600 drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PDTHR-600 rig's flexibility means it can be mounted on two truck versions and on local trucks matching the rig to the terrain it will be used. Can be used for both DTH and mud rotary drilling
Additional Information:
Payment Terms : T/T
Packaging Details : standard and export packing
Delivery Time : 6 to 8 weeks
Technical Specification
Prime Mover: Truck | |
Make | Ashok Leyland |
Drive | 6 x 4 |
Gross Vehicle weight | 25 MT |
Engine Rating | 230 HP @ 2400 rpm |
Prime Mover: Support Truck | |
Make | Ashok Leyland |
Drive | 6 x 2 |
Gross Vehicle weight | 16 MT |
Engine Rating | 160 HP @ 1800 rpm |
Air Compressor | |
Make | ELGI / Atlas Copco |
CFM | 1200 |
PSI | 350 (22 Bar) |
Drill Depth | |
Maximum Depth | 600Meters(2000Feet) |
Rod Handling | 6.0 inch(20 Feet) |
Hole Diameter | |
DTH | 165 – 355mm(6 1/2″- 14″) |
Rotary | 165 – 355mm(6”-14”) |
Mud Pump | |
Make | G&P/ Lakshmi |
Stroke | 150mm |
Liner Size | 150mm |
Mast | |
Max Capacity | 30 tons ( 67200 lbs ) |
Height | 9 mtr (29.7 ft) |
Rod handling capacity | 6.0 mtr (20 ft) |
Main Hoist Assembly | |
Line Pull ( Bare Drum) | 3000 Kgf |
Max Line Speed | 40 M/Minute |
Wire Dia | 16 mm |
Drive | Hydraulic |
Feed System | |
Pull Up | 11,500 Kgf |
Pull Down | 6,000 Kgf |
Hoisting Speed | 35 Mtr/Minute |
Water Injection Pump | |
Max Flow | 56 LPM |
Max Pressure | 30 kg/cm2 |
Auxillary Winch | |
Bare Drum Pull | 1000 Kgf |
Max Speed | 20 M/Minute |
Hydraulic Circuit | |
Max Operating Pressure | 220 kg/cm2 |
Hydraulic Tank Capacity | 600 Litres |
Filtration Non –Returnline | 10/25 Microns |
Rotary Head | |
Torque | 600 Kg-M |
Rotation Speed | 1 -100 Rpm |
Cylinders | |
Stabilizing Cylinders 4 Nos | 125 mm(Bore), 610 mm(Stroke) |
Mast Raising Cylinder | 100 mm(Bore), 800 mm(Stroke) |
Feed Cylinder | 140 mm(Bore), 2350 mm(Stroke) |
Break out Wrench | 80 mm(Bore), 300 mm(Stroke) |
RH Slide Out Cyliner | 80 mm(Bore), 450 mm(Stroke) |
Feed System | |
Pull Up | 18,635 Kgf |
Pull Down | 12,635 Kgf |
Hoisting Speed | 75 Mtr/Minute |
manufacture and supply of prl make pdthr-200 refurbished truck mounted hydraulically operated dth cum rotary drill rig capable of drilling maximum 8" by dth and 10 by rotary operation under favorable conditions.
.Additional Information:
Payment Terms : T/T
Packaging Details : STANDARD PACKING AND DELIVERY
Delivery Time : 3-4 weeks
supply of crawler mounted hydraulically operated model pbhd 30, dth drilling rig capable of drilling maximum dia150 mm by dth operation up to a depth of 30 meters under favorable conditions
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : standing Exports and Packings
Delivery Time : 3-4 weeks
Brief Description:
The PDTHR-450 drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PDTHR-450 rigs flexibility means it can be mounted on two truck versions and on local trucks matching the rig to the terrain it will be used. Can be used for both DTH and mud rotary drilling
Optional: Skid mounting
Key features:
Proven technology ensures easy maintenance and more productive. The rig can be customize as per customer requirement All the actuators are operated by proportional control valves
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : STANDARD AND EXPORT PACKAGING
Delivery Time : 4-6 week
We are the leading manufacturers Drilling Rig. Manufacture and supply of PRL Make PDR-200 Trolley mounted hydraulically operated drilling rig capable of drilling 4 1/2" up to a depth of 200 meters.
Includeed Scope of Supply
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard Exports and Packing
Delivery Time : 4-6 Weeks
we are the leading manufacturers of auger drilling rig.
drill rod handling3 1/2"x10feet
drilling depth up to 15meters(50feets)
drilling diameter 18"
.Additional Information:
Payment Terms : L/C, T/T
Packaging Details : STANDARD AND EXPORT PACKAGING
Delivery Time : 3-4 week
Model pcdr - 100, trolley mounted top head drive hydraulically operated drill rig is capable of drilling in any kind of medium to hard rock formation to extract mineral samples by core drilling method up to a maximum depth of 100 meters. Under favorable drilling conditions. The following are the detailed specifications.
Key Features
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 3-4 WEEKS
The pcdr-150 drill rig is ideal for soil testing drilling application in rock formation. The pcdr-150 rig’s flexibility means it will be mounted on tractor and (rig can be mounted on two wheel or four wheel tractor upon customer request) optional: multipurpose drill rig (core, dth, mud rotary).
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard Packing
Delivery Time : 4-6 week
brief description:
the ptbw-350 drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The ptbw-350 rigs flexibility means it will be mounted on tractor and air compressor will be mounted on separate trolley or truck (rig can be mounted on two wheel or four wheel tractor upon customer request)
key features:
proven technology ensures easy maintenance and more productive.
the rig can be customize as per customer requirement
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : STANDARD AND EXPORT PACKAGING
Delivery Time : 4-6 week
The PDTHR-450 Truck Mounted DTH Cum Rotary Drilling Rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PDTHR-450 rig’s flexibility means it can be mounted on two truck versions and on local trucks matching the rig to the terrain it will be used. Can be used for both DTH and mud rotary drilling
Key features
Proven technology ensures easy maintenance and more productive. The rig can be customize as per customer requirement All the actuators are operated by proportional control valves
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 4-6 week
manufacture and supply of prl make pdthr-1000 man truck mounted hydraulically operated dth cum rotary drill rig capable of drilling maximum 10" by dth and 12 by rotary operation under favorable conditions. |
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Standard Packing and Delivery
Delivery Time : 3-4 weeks