We are recognized as one of eminent
Reverse Osmosis Antiscalant Manufacturers and Suppliers in India. Basically, Antiscalant belongs to a family of chemical made to prevent formation as well as precipitation of crystallized mineral salts which form scale. Our Reverse Osmosis Antiscalant is extremely active in controlling the accumulation of inorganic scale foaming salts as well as fouling on membrane surfaces.
Salient Features - Protecting expensive membranes
- Minimizes energy cost
- Decreases use of acid for cleaning
- High recovery rate
- Save downtime in frequent membrane cleanings
- Cost effective
AntiscalantAntiscalant are a family of chemical designed to inhibit the formation and precipitation of crystallised mineral salts that form scale. Rocare antiscalant are highly effective in controlling the deposit of inorganic scale foaming salts and particulate fouling on membrane surfaces. Use of our Rocare antiscalant save money by protecting expensive membranes, reduces use of acid for cleaning, high recovery rate, reduce energy cost, save downtime in frequent membrane cleanings. Our Rocare is cost effective and prevent mineral scaling of your membranes.
| Product Code | Key Characteristics | Application |
| ROCARE A11 | Neutral pH Antiscalant | 1000 ppm Hardness, 50 ppm Silica |
| ROCARE A21 | Broad Spectrum Antiscalant | LSI upto 2.5, 160 ppm Silica |
| ROCARE A31 | Premium Antiscalant | LSI upto 3, 400 ppm Silica |
CleanersTrouble free operation of R.O. Plant is critical because membranes tend to get scaling, fouling and other organic deposits reduce efficiency or damage membranes. In order to keep the membranes free of scaling membranes have to be cleaned regularly and preserved.
| PRODUCT CODE | KEY CHARACTERISTIC | APPLICATION |
| ROCARE C51 | Low pH Cleaner | Removes Inorganic Scales and Iron |
| ROCARE C52 | Low pH Cleaner | Removes Inorganic Scale. Eliminates repeat cleaning |
| ROCARE C53 | High pH Cleaner | Removes Organic foulants and Silica |
BiocidesMembranes are prone to fouling due to several causes one of which is biofouling caused by bacteria. Biofouling can form foundation to collect other debris and lead to further problems. Fouled membranes decrease flow at constant rate, increase pressure to maintain permeate flow and decreased salt rejection. In order to prevent biofoulings use of biocides recommended. The biocide should be dosed from beginning of using new and or clean membrane.
| PRODUCT CODE | KEY CHARACTERISTIC | APPLICATION |
| ROCARE B41 | Non Oxidising Biocide | nhibits & removes bacteria, alkali fungi & organic growth |
| ROCARE B42 | Non Oxidising Biocide | Premium Product |
DechlorinationThere should be no free chlorine residual in R.O. feed water, even with very low level of chlorine in feed stream will result irreparable oxidation damage to the membranes. So operator should ensure that oxidants do not enter R.O. System. Our ROCARE Dechlorination Chemicals remove free chlorine from R.O. feed water.
| PRODUCT CODE | KEY CHARACTERISTIC | APPLICATION |
| ROCARE D71 | Chlorine Remover | Removes Chlorine |
pH Booster | PRODUCT CODE | KEY CHARACTERISTIC | APPLICATION |
| ROCARE P81 | Alkalinity Builder | Boosts up pH |
Surfactants | PRODUCT CODE | KEY CHARACTERISTIC | APPLICATION |
| ROCARE S91 | Surface Active agents | Increase Efficiency of Cleaners |
Antiscalant BallsROCARE WB is a white transparent ball shaped antiscalant to be used for domestic RO systems for ensuring longer life of membranes.
| Description | Assay |
| Purity | 99.00% min |
| Water Insoluble | 0.06 % max |
| Heavy Metals (as Pb) | 8 ppm max |
| Arsenic (As) | 3 ppm max |
| pH Value | 3.5 - 4.0 |
| Fluoride | 35 ppm max |
| Iron Content | 40 ppm max |
| Average Weight | 10 +/- 0.5 gm / ball |
| Average Dissolution | 0.03-0.05 g/ 24 hours |
Write a Review
Rahman / Naresh (Prime Laboratories)
Lake Hill Road, New Mla Quarters, Basheerbagh, Hyderabad, Telangana - 500063, India
Share us via
