Priya Enterprise

Key Considerations

• ISRI Specifications:
  Standards are defined by the Institute of Scrap Recycling Industries (ISRI), including:

  • Density guidelines (e.g., 14–17 lbs/cu ft for unflattened UBC)

  • Minimum size ranges (e.g., 24" × 30" × 40")

• Flattened vs. Unflattened:

  • Flattened bales are denser and allow more weight per container

  • Unflattened bales are larger in size but carry less weight

• Tying Method:

  • Steel bands or wires are standard

  • Skids are not allowed

• Purity:
  High-quality UBC bales typically contain up to 99% clean aluminium with minimal contamination

Commercial Details

• Rate: 160–180 per kg (Aluminum UBC Scrap)

• Delivery Terms: Ex-Works / At our site

Note

Final dimensions, weight, and density should always be confirmed to match the buyer–seller agreement and container capacity 

Aluminium Scrap Zorba is a commonly traded non-ferrous scrap material widely used for melting and recycling purposes

What is Zorba (ISRI Definition)

Zorba is officially defined by the Institute of Scrap Recycling Industries (ISRI) as Shredded Non-Ferrous Scrap, predominantly aluminium. It:

• Consists mainly of aluminium, along with other non-ferrous metals such as copper, lead, magnesium, stainless steel, nickel, tin, and zinc, in elemental or alloy form.

• Is produced through shredding and advanced separation processes including eddy current separation, air separation, flotation, screening, and magnetic separation to remove free iron.

• Must be completely free from radioactive materials, dross, and ash.

• Is classified into grades (e.g., Zorba 85, Zorba 90, Zorba 95), where the number represents the estimated percentage of non-ferrous metal content. Higher grades indicate higher aluminium content and lower impurities.

Actual specifications and impurity limits are subject to mutual agreement between buyer and seller, as per ISRI guidelines

Packaging & Logistics

40 ft ISO Container

• Load capacity: 20–26 tonnes

• Designed for maximum bulk economy and large-volume international exports

• Suitable for automotive shredder scrap

20 ft ISO Container

• Load capacity: 14–18 tonnes

The material is optimized for international bulk handling with minimized cost per unit, making it ideal for large-scale recycling operations 

Aluminium Scrap TENSE – ISRI Details

TENSE is the ISRI classification for Mixed Aluminium Castings, commonly traded worldwide for remelting and secondary aluminium production.

ISRI Definition (Extracted & Paraphrased)

TENSE shall consist of all clean aluminium castings, which may include automobile and airplane castings, but must not contain ingots.
The material must be free from iron, brass, dirt, and other non-metallic materials.
Oil and grease content shall not exceed 2%

TENSE.SCRAP.FILE5

.

Primary Features of Aluminium Scrap TENSE

• Material Form: Aluminium castings
  (engine blocks, transmission housings, pump bodies, machinery cast parts)

• Condition: Clean and dry

• Oil & Grease: Maximum 2%

• Contamination:

  • No iron or steel

  • No brass

  • No dirt or non-metallic debris

  • No ingots allowed

• Typical Use: Remelting for secondary aluminium alloys

• Typical Aluminium Content: Approximately 95–99%, depending on alloy mix and cleanliness

• Common Sources:

  • Automotive engine blocks

  • Gearbox housings

  • Industrial aluminium cast components

    TENSE.SCRAP.FILE5

Physical Characteristics

• Irregular, bulky casting pieces

• Rough surface texture from casting process

• Possible machining marks

• Ferrous attachments must be completely removed 

Twang is the ISRI code name for Insulated Aluminium Wire Scrap. It consists of aluminium wires with plastic or rubber insulation still attached. This scrap category is officially listed in the ISRI Scrap Specifications Circular under non-ferrous scrap.

Key Points (Extracted)

• The percentage of aluminium content is not fixed by ISRI standards.

• Aluminium recovery percentage is agreed between buyer and seller, usually based on sample analysis.

• The scrap contains insulation and may include minor contaminants.

• It is generally not considered a direct melting grade unless insulation is removed.

• Insulation is typically stripped before melting to avoid furnace problems

  TWANG.AL.SCAP.FILE3

  .

Typical Appearance

Twang scrap usually appears as coils or bundles of insulated aluminium wires or cables, such as:

• Electrical cables with coloured insulation

• Industrial feeder wires

• Insulated service cables

Before remelting, insulation is normally removed mechanically to recover clean aluminium

ISRI-Based Explanation of Aluminium Scrap “Taint / Tabor”

Taint / Tabor is a widely traded melting-grade aluminium scrap used by recyclers and foundries worldwide. It is an official grade defined by the Institute of Scrap Recycling Industries (ISRI).

What Is ISRI Taint / Tabor Aluminium Scrap?

Taint / Tabor refers to clean, mixed old-alloy aluminium sheet scrap suitable for melting and recycling. It is globally recognized and commonly traded under HS Code 76020010

TAINT TABOR.FILE6

Official ISRI Description

According to ISRI scrap specifications, Taint / Tabor:

• Shall consist of clean old alloy aluminium sheet and sheet utensil scrap

• Must contain two or more aluminium alloys

• Must be free from:

  • 7000 series aluminium

  • Foil

  • Venetian blinds

  • Castings

  • Hair wire and screen wire

  • Food or beverage containers

  • Radiator shells

  • Airplane sheet

  • Bottle caps

  • Plastic, dirt, and other non-metallic materials

• Oil and grease content shall not exceed 1%

• Up to 10% painted sheet, siding, or awnings is permitted (subject to agreement)

  TAINT TABOR.FILE6

Typical Physical Form & Appearance

• Used aluminium sheets from old sources

• Flat pieces of varying thickness

• Minimal paint or surface weathering

• Sheet form only (not shredded or granular)

Commonly Excluded Materials

• Foil

• Plastic or rubber

• Castings

• Venetian blinds

• Food and beverage containers

• Wires and screen wire

• Radiator shells

• Non-metallic debris