Other Products / Services #4615447

The PCM370 plant condition management system collects, stores, analyzes and distributes machinery status monitoring information to a local network or wide area network (over the Internet). The PCM370 obtains status data of critical machinery as well as balance of plant equipment. All of ProvibTech's digital monitoring systems are quickly and easily integrated into the PCM370 system, as well as devices from other manufacturers' which communicate via Modbus. Besides the vibration monitoring data, the PCM370 is also capable of collecting numerous process variables such as: voltage inputs, current inputs, RTDs, thermocouples, discrete inputs and Modbus.

All ProvibTech's monitors and transmitters can quickly and easily be integrated to upload machine status and its dynamic data to the PCM360. The PCM360 obtains both critical machinery running status and balance of plant running status. Additionally, the PCM360 collects process data as 4-20mA input or digital monitor input via Modbus, etc. The PCM360 provides an integrated system solution for asset management resulting in a total solution for machine maintenance and protection.

The 1000pF coupling capacitor is a sensor used for online and offline partial discharge measurements on rotating machines. The sensor will be usually installed at the busbar or on the high voltage terminals of the rotating machine. Permanent or temporary partial discharge detectors analyzers can be connected via standard RG58 BNC cables to the coupler, usually by using a termination and safety box in between.

The PMS-300 Process Monitoring System has been designed to be modular and flexible in rack-based design to suit most requirements for protection and monitoring of critical machinery. The system offers two (2) reference and up to 64 sensor inputs. The integrated BNC terminals on the front provides raw signal for external analysis. Various predefined Software applications are available for each individual module for protection and monitoring of the following parameters:

he partial discharge monitoring and analysis system with a true color LCD display showing all the necessary information for the commissioning and surveillance of high voltage rotating machines. The noise gating channel and variable LP Filter allows to separate noise from the pd signals. The TMSshows locally actual partial discharge level for every individual channel (phase) on a bargraph, Realtime Partial Discharge Activities in Oscilloscope View as well as a colorised phase resolved partial discharge pattern. The touch functionality of the LCD display allows to parametrise, store and visualise the partial discharge signals without the use of any computer. Up to 16 TMS can be connected to the central database server TMS-2000 to store continuously trendparameters as well as partial discharge measurement results as Phase Resolved Partial Discharge Pattern, 3 Phase Time Relation pattern, Pulse Height Distribution etc. Eight 4- 20mA input channels allows to record machine operation conditions as MW, MVA, temperatures etc. together with the partial discharge results. The Modbus RTU interface allows an easy integration into the exisiting SCADADCS system. One 4-20mA and one Relay Contact per channel group (4) are available. This make the TMS the ideal cost effective partial discharge monitoring and analysis system for permanent installation.

Flow indicator is remote flow indicators and controllers for use with flow transmitters. Flow indicators provide quick, reliable and economical way to verity fluid flows through industrial process lines.

Flow switches are rugged, robust and reliable for usage in harsh and hazardous environments. Flow switches are designed to detect various flow rates in industrial process lines and activate an alarm or pump. Flow switch is having sensor with an electrical contact output at a specific flow rate.

RTDs - or Resistance Temperature Detectors - are temperature sensors that contain a resistor that changes resistance value as its temperature changes. They have been used for many years to measure temperature in laboratory and industrial processes, and have developed a reputation for accuracy, repeatability, and stability.

Maintaining the specified temperature range ensures maximum efficiency, longer equipment life and user safety. Temperature gauges are ideal for most the rugged industrial applications, These offering bimetal thermometers with hermetically-sealed cases to prevent damage from the weather and dust, as well as gas actuated models with remote reading dials.

Instruments used to measure pressure are called pressure gauges or vacuum gauges. A pressure gauge is used to measure the pressure in a vacuumlinewhich is further divided into two subcategories: high and low pressure. The applicable pressure ranges of many of the techniques used to measure vacuums have an overlap. .

A pressure switch is a form of switch that closes an electrical contact when a certain set pressure has been reached on its input. The switch may be designed to make contact either on pressure rise or on pressure fall.

TR series vibration transmitter uses advanced LSI technology that integrate the signal conditioning, processing and outputting circuitry into one integral unit. It can directly replace the probe driver and connect to the proximity probe and extension cable, converting the signal to a 4-20 mA output. Buffered dynamic output is available for additional analysis.

The PCA-100 charge amplifier converts the charge-based signal from a piezoelectric transducer into a current or a voltage signal. This current or voltage signal is transmitted to the processing electronics via a standard 2-wire or 3-wire transmission cable. The current modulation technique allows transmission over a distance of up to 1 km. A galvanic separation unit is required for this configuration . The electronic circuitry of the PCA-100 signal conditioner is incor-porated into an aluminium enclosure. The charge amplifier provides high-pass and low-pass filters and an optional integrator to give a velocity output. Fur-thermore, RFI filters protect the input and output against radio-frequency interferences and other elec-tromagnetic influences.

The sensor is designed with integrated linearization electronic in order to ensure excellent linearity and active temperature compensation. The built-in oscillator tuned above 750kHz ensures measurement with minimal magnetic run out effect. The PPT-280 can be used either for measurement between 0.2mm and 2.2mm or 0.2mm and 4.2mm. The voltage output is directly proportional to the measured distance between the metal target and the sensor tip. The sensor can be powered either with -24V or +24V depending on configuration or ordering code. The embedded sensor head is resistant to shock. The sealed body is resistant to oil and water on both sides of the sensor. Optional configuration kit (software, cable and USB adapter) allows to setup measuring range, power supply type (+24V or 24V) and target material and to perform on-site recalibration.

The PT500 Mechanical Vibration Switch provides an economical solution for basic vibration monitoring of a wide variety of rotating and reciprocating equipment. Its reliable vibration sensing mechanism actuates a set of internal contacts when vibration levels exceed the adjustable set point.

The VS102 Electronic Vibration Switch is designed to be the cost effective solution for vibration switch applications. The VS102's unique and rugged design is suitable for harsh environments and hazardous areas. It has a universal mounting feature, relays or triacs, and a 4-20mA output.

The PT580 Digital Vibration Switch is designed to be the "one stop shop" for all vibration switch applications. The PT580's unique and rugged design is programmable, suitable for harsh environments and or hazardous areas. It has a universal mounting feature, wide operating temperature range, relays, 4-20mA output, Modbus communication, and works with internal sensor or a remote sensor.

Portable Shaker combines sine signal generator, power amplifier, standard transducer and a shaker in one and features a small volume, high accuracy and easy operation. It can be used either in laboratory or on site.