Propeller Pumps

Kathwada, Ahmedabad, Gujarat

We are offering Chemical Transfer Pumps. Application transferring of concentrated hcl from road tankers filter press for dyes & chemical effluent treatment water treatment plants pickling in steel rolling mills scrubbing of corrosive gases like ci , br , f , so , so , co , nh . electro-plating descaling industries where used dyes and chemicals drugs & pharmaceuticals cushitic soda plants thermal and atomic power plants fertilizer plants copper, zinc, smelter steel plants tio plants rayon and staple fibre plant (bleach liquor) paper & pulp industries.

We are offering Centrifugal Pumps. Product features casing bonus casing thickness: class 150 pumps feature class 300 wall thickness as standard; increased reliability and maximized casing life. top centerline discharge for air handling, self-venting. back pull-out design for ease of maintenance. integral casing feet prevent pipe load misalignment maximized seal and bearing life. serrated flanges standard for positive sealing against leakage. Meets ansi b16.5 requirements.class 150 ff flanges standard, optional class 150 rf, 300 ffrf. fully open impeller acknowledged best design for cpi services solids handling, stringy material, corrosives, abrasives. Two times the wear area of closed type impellers for longer life. Back pump-out vanes reduce radial thrust loads and seal chamber pressure. sealing flexibility wide range of sealing arrangements available to meet service conditions. Engineered seal chambers improve lubrication and heat removal (cooling) of seal faces for extended seal life and pump uptime. positive sealing fully confined gasket at casing joint protects alignment fit from liquid, makes disassembly easier. ductile iron frame adapter material strength equal to carbon steel for safety and reliability. continuous performance original flow, pressure and efficiency are maintained by simple external adjustment resulting in long-term energy and repair parts savings. heavy duty shaft and bearings rigid shaft designed for minimum deflection at seal faces less than 0.002 in. (.05 mm). Bearings sized for 10-year average life under tough operating conditions. Available with or without shaft sleeve. extra large oil sump capacity increased oil capacity provides better heat transfer for reduced oil temperature. Bearings run cooler and last longer. rigid frame (and casing) feet

The company is a well known Manufacturer and Exporter Metallic Magnetic Drive Centrifugal Pumps in national and international markets.

 

Our Centrifugal Chemical Pump are semi-open impeller type pumps, which require less floor space. Precise engineering and robust construction have made these pumps a suitable choice for steel, textile and food industries. Manufactured using latest

Product Features Casing Bonus casing thickness: Class 150 pumps feature Class 300 wall thickness as standard; increased reliability and maximized casing life. Top centerline discharge for air handling, self-venting. Back pull-out design for ease of maintenance. Integral casing feet prevent pipe load misalignment—maximized seal and bearing life. Serrated flanges standard for positive sealing against leakage. Meets ANSI B16.5 requirements.Class 150 FF flanges standard, optional Class 150 RF, 300 FF/RF. Fully Open Impeller Acknowledged best design for CPI services—solids handling, stringy material, corrosives, abrasives. Two times the wear area of closed type impellers for longer life. Back pump-out vanes reduce radial thrust loads and seal chamber pressure. Sealing Flexibility Wide range of sealing arrangements available to meet service conditions. Engineered seal chambers improve lubrication and heat removal (cooling) of seal faces for extended seal life and pump uptime. Positive Sealing Fully confined gasket at casing joint protects alignment fit from liquid, makes disassembly easier. Ductile Iron Frame Adapter Material strength equal to carbon steel for safety and reliability. Continuous Performance Original flow, pressure and efficiency are maintained by simple external adjustment resulting in long-term energy and repair parts savings. Heavy Duty Shaft And Bearings Rigid shaft designed for minimum deflection at seal faces—less than 0.002 in. (.05 mm). Bearings sized for 10-year average life under tough operating conditions. Available with or without shaft sleeve. Extra Large Oil Sump Capacity Increased oil capacity provides better heat transfer for reduced oil temperature. Bearings run cooler and last longer. Rigid Frame (and Casing) Feet

We design high performing Centrifugal Chemical Pumps that are reckoned for speed and efficiency. Centrifugal process pumps, offered by us, are manufactured from optimum quality raw materials using advanced technology that ensures their maximum output with minimum maintenance. Available in Back pull-out construction Horizontal foot mounted single stage End suction Top centerline discharge Material of Construction Cast Iron, Cast Steel, SS304, SS316, SS304L, SS316L, Alloy20, CD4MCu, Hast Alloy b & C etc Conforms to DIN 24256 / ISO 2858 standards and in general is conforms to API 610 as well. Applications Fertilizer Plants Chemical Process Industries Bulk Drugs and Pharmaceutical Sugar Plant Heating and Air Conditioning Plants Water Supply Cement Pulp and Paper Agriculture Textile Organic & Inorganic Liquids Refineries Jet Dyeing Dyes & Intermediates Cooling Towers Effluent Treatment Plants Fire Fighting Steel Power Oil Extraction and Waste Oil Refineries Thermic Fluid Operating Range Capacity M3/hr Up to : 700 m3/hr Head Up to : 150 mtr. Product Features Casing Bonus casing thickness: Class 150 pumps feature Class 300 wall thickness as standard; increased reliability and maximized casing life. Top centerline discharge for air handling, self-venting. Back pull-out design for ease of maintenance. Integral casing feet prevent pipe load misalignment�maximized seal and bearing life. Serrated flanges standard for positive sealing against leakage. Meets ANSI B16.5 requirements.Class 150 FF flanges standard, optional Class 150 RF, 300 FF/RF. Fully Open Impeller Acknowledged best design for CPI services�solids handling, stringy material, corrosives, abrasives. Two times the wear area of closed type impellers for longer life. Back pump-out vanes reduce radial thrust loads and seal chamber pressure.

Manufacturer, exporter and supplier of Centrifugal Bare Pumps. Our range of Centrifugal Bare Pumps is available with following features and specifications:

Features:

High efficiency and high discharge rate at less

We are providing our clients with a competent range of Centrifugal Chemical Process Pumps. These are widely appreciated for high efficiency and low flow regulation. The flow rate varies with change in system resistance, which ensures easy flow control. These pumps are further recognized for giving steady flow at uniform pressure, without any pressure surges. This assures the highest levels of flexibility,

Our Centrifugal Mono block Pumps are made with supreme grade raw material, known for its smooth running and low power consumption with noiseless operations. Equipped with modern technical facilities and unmatched features, the Mono block Pumps.

We design high performing centrifugal process pumps that are reckoned for speed and efficiency. Centrifugal process pumps, offered by us, are manufactured from optimum quality raw materials using advanced technology that ensures their maximum output with minimum maintenance. Available in

• Back pull-out construction
• Horizontal foot mounted single stage
• End suction Top centerline discharge

Material of Construction

• Cast Iron, Cast Steel, SS304, SS316, SS304L, SS316L, Alloy20, CD4MCu, Hast Alloy b & C etc

Conforms to

• DIN 24256 / ISO 2858 standards and in general is conforms to API 610 as well.

Applications

Fertilizer Plants Chemical Process Industries Bulk Drugs and Pharmaceutical Sugar Plant Heating and Air Conditioning Plants Water Supply Cement Pulp and Paper Agriculture Textile Organic & Inorganic Liquids Refineries

Jet Dyeing Dyes & Intermediates Cooling Towers Effluent Treatment Plants Fire Fighting Steel Power Oil Extraction and Waste Oil Refineries Thermic Fluid

 

Product Features

• Casing
  • Bonus casing thickness: Class 150 pumps feature Class 300 wall thickness as standard; increased reliability and maximized casing life.
  • Top centerline discharge for air handling, self-venting.
  • Back pull-out design for ease of maintenance.
  • Integral casing feet prevent pipe load misalignment maximized seal and bearing life.
  • Serrated flanges standard for positive sealing against leakage. Meets ANSI B16.5 requirements.Class 150 FF flanges standard, optional Class 150 RF, 300 FF/RF.
• Fully Open ImpellerAcknowledged best design for CPI services solids handling, stringy material, corrosives, abrasives. Two times the wear area of closed type impellers for longer life. Back pump-out vanes reduce radial thrust loads and seal chamber pressure.
• Sealing FlexibilityWide range of sealing arrangements available to meet service conditions. Engineered seal chambers improve lubrication and heat removal (cooling) of seal faces for extended seal life and pump uptime.
• Positive SealingFully confined gasket at casing joint protects alignment fit from liquid, makes disassembly easier.
• Ductile Iron Frame AdapterMaterial strength equal to carbon steel for safety and reliability.
• Continuous PerformanceOriginal flow, pressure and efficiency are maintained by simple external adjustment resulting in long-term energy and repair parts savings.
• Heavy Duty Shaft And BearingsRigid shaft designed for minimum deflection at seal faces less than 0.002 in. (.05 mm). Bearings sized for 10-year average life under tough operating conditions. Available with or without shaft sleeve.
• Extra Large Oil Sump CapacityIncreased oil capacity provides better heat transfer for reduced oil temperature. Bearings run cooler and last longer.
• Rigid Frame (and Casing) Feet

We are offering Centrifugal Pumps, which is available in back pull- Out construction, horizontal foot mounted single stage, end suction and top centerline discharge.

 

Applications:

• Chemical Process Industries
• Fertilizer Plants
• Bulk Drugs and Pharmaceutical
• Heating and Air Conditioning Plants
• Sugar Plant
• Water Supply
• Pulp and Paper
• Cement
• Agriculture Textile
• Jet Dyeing

We offer Vertical Propeller Pumps that is well reckoned for its durability and performance. Our Vertical Axial Flow Pumps are manufactured from superior quality raw materials that make them perfect for varied applications. Our Vertical Axial Flow Pumps are available in varied sizes to match the needs of the clients. Features Parameters of vertical pumping applications require the units be available in a variety of pumping configurations to meet user needs. Propeller Pumps meets these demands by providing pump bowls from 6" to 30" in diameter. Propeller bowls can be in series to produce the necessary discharge pressures. Drive shafts extending through the discharge head can be sealed using either packing or mechanical seals. Propeller Pumps also offers an array of discharge head designs, including cast iron or fabricated steel construction, above- or below-ground. Durable Robust construction High performance Low maintenance Less power consumption Applications They are used extensively for pumping water from sources including lakes, cooling ponds, tanks, rivers and oceans. These applications include raw water intake, dewatering, storm water removal, and flood control. Vertical axial flow pump applications are found in a variety of markets including: urban and rural municipal water, government, industrial and irrigation, and more. Pharmaceuticals Petrochemical Salt Solution Organic chemical Paper Hydrocarbon Caustics

We offer Vertical Axial Flow Pumpthat is well reckoned for its durability and performance. Our Vertical Axial Flow Pumps are manufactured from superior quality raw materials that make them perfect for varied applications. Our Vertical Axial Flow Pumps are available in varied sizes to match the needs of the clients. FeaturesParameters of vertical pumping applications require the units be available in a variety of pumping configurations to meet user needs. Propeller Pumps meets these demands by providing pump bowls from 6" to 30" in diameter. Propeller bowls can be in series to produce the necessary discharge pressures. Drive shafts extending through the discharge head can be sealed using either packing or mechanical seals. Propeller Pumps also offers an array of discharge head designs, including cast iron or fabricated steel construction, above- or below-ground.

• Durable
• Robust construction
• High performance
• Low maintenance
• Less power consumption

ApplicationsThey are used extensively for pumping water from sources including lakes, cooling ponds, tanks, rivers and oceans. These applications include raw water intake, dewatering, storm water removal, and flood control. Vertical axial flow pump applications are found in a variety of markets including: urban and rural municipal water, government, industrial and irrigation, and more.

• Pharmaceuticals
• Petrochemical
• Salt Solution
• Organic chemical
• Paper
• Hydrocarbon
• Caustics

Propeller make vertical axial flow pumps are of rugged, heavy-duty construction designed to successfully operate in a multitude of applications requiring the movement of a high volume of water at a low discharge pressure.

Applications :They are used extensively for pumping water from sources including lakes, cooling ponds, tanks, rivers and oceans. These applications include raw water intake, dewatering, storm water removal, and flood control.

Vertical axial flow pump applications are found in a variety of markets including: urban and rural municipal water, government, industrial and irrigation, and more.

Features:Parameters of vertical pumping applications require the units be available in a variety of pumping configurations to meet user needs. Propeller Pumps meets these demands by providing pump bowls from 6" to 30" in diameter. Propeller bowls can be in series to produce the necessary discharge pressures.

Drive shafts extending through the discharge head can be sealed using either packing or mechanical seals. Propeller Pumps also offers an array of discharge head designs, including cast iron or fabricated steel construction, above- or below-ground.

Vertical propeller pump are of rugged, heavy-duty construction designed to successfully operate in a multitude of applications requiring the movement of a high volume of water at a low discharge pressure.Applications :They are used extensively for pumping water from sources including lakes, cooling ponds, tanks, rivers and oceans. These applications include raw water intake, dewatering, storm water removal, and flood control.