PRiCO (Programmble intelligent Counter) PRiCO provides a very cost - effective and reliable solution to many complex counting requirement. What sets PRiCO apart from the convention facet.
SPECIFICATIONS :Counting modes
- Up counting
- Down counting
- Quadrature counting
- Bi-directional counting
Display
7-digit, seven segment LED display (10mm height)
- Counter/Totaliser/Batch: 7- digit display
- Rate : 5- digit display
- RPM : 6- digit display
Range
- Counter/Totaliser:Selectable least count 0.000001, 0.00001, 0.0001, 0.001, 0.01, 0.1, 1
- Rate: Rate per minute (RM) / Rate per hour (RH) user selectable. (minimum frequency for Rate mode is 10 Pulses/minute)
- RPM: 10 RPM to 360000 RPM
Set points
- 3 user programmable set points.
- SET1 , SET2 :Dedicated for COUNTER mode.
- SET3 : User programmable for any one of COUNTER / TOTALISER /BATCH / RPM.
Relay operating mode
- Relay ON mode
- Relay OFF mode
- Pulse time mode a) Time pulse repeat modeb) Auto-reset mode
Count inputs
- Voltage pulse : 8 to 30 V DC amplitude from proximity switch, encoder.
- Potential free contacts from limit switch, micro switch.
Input frequency
- 0 to 6 KHZ: In up / down mode
- 0 to 3 KHZ: In quadrature mode / bi-directional mode.
Sensor supply
Scale factor
- Programmable
- scale factor = X x 10Y X = From 0.000001 to 9.999999Y = 0, 1, 2, -1, -2, -3, -4, -5
Reset input
- Manual / Front panel reset: with enable / disable facility
- Remote/ Back panel / Electrical reset: User selectable( minimum time for remote reset is 10 ms. )
- Reset through programming mode: User selectable
Relay outputs
- Three Relays ( one relay for each set point )
- Relay1/ Relay2 for set1/set2 operation ( COUNTER )
- Relay3 for set3 ( COUNTER / TOTALISER / BATCH / RPM ) Programmable
- Relay ratings: Rated for 5 Amp at 230 V AC
Memory retention
Protection
- Parametersa) Password protectedb) Hardware protected (Dip switch setting)
- Set points a) Software protected (Through program configuration i.e. SdF 3.)
Supply
Mounting
Weight
Operating temperature
Relative humidity
Overall dimensions
- (All dimensions are in mm.)