Pulmach

Malkajgiri, Hyderabad, Telangana

Ribbon Blenderis designed for rapid and thorough blending, to eliminate product stagnation and rapid action the opposite ribbons rolls, tumbles and pushes the product in opposite direction longitudinally from both ends. The flow of material in opposite direction results in uniform and fast mixing.

Seals:A Teflon bush, Oil seal and gland packing is provided to avoid leakage. (Silicon seal optional)

Drives:The blender is provided with a suitable reduction gear box and motor to achieve required RPM

The Product laden trays are placed on the heating shelves provided in the chamber. Ensuring closure of the door, nitrogen purging is done for faster evacuation of air. Hot water/ Steam is supplied into the shelves and the chamber is applied with full vacuum. This principle is effective for temperature sensitive products and faster drying.

• Vacuum drying is ideally suited for Bulk, Biotechnology and Pharmaceutical industry for temperature sensitive product and for quick drying applications.
• Moisture/solvent free content can be achieved.
• Toxic materials can be safely dried in an enclosed vacuum environment and solvent can be safely condensed into the receiver.

1. Vacuum Chamber
2. Jacketed Body
3. Condenser
4. Receiver
5. Hot water and
6. vacuum system
7. PLC

Polygon Blenderis ideal for bending of powder and homogeneous lubrication of granules in short time cycles. Polygon Blender operates on diffusive mixing principle of distributing particles over a surface to surface continuously located at optimum angles. Polygon Blinder can be used at higher RPM as the blender is well balanced.

Useful in Chemical, Pharmaceutical, Cosmetics, Food and other industries.

• S.S.316 contact parts in place of S.S.304
• GMP Model in place of standard model
• Flame proof electrical fittings

Micro Pulveriser is designed to meet varied pulverising requirements in Pharmaceutical, Chemical and many other industries. The mill can be effectively used for pulverising soft and hard material to required fineness. The milling chamber is provided with replaceable multiple deflector liner and serrations to achieve greater fineness of milled material.

Micro Pulveriser machine is widely used for micro pulverisation in Pharmaceutical, Food, and chemical, Ayurveda, Confectionery and many more other industries.

• Screw feeding system
• Various shapes of hammers
• S.S.316 in place of S.S.304 contact parts
• GMP model in place of standard model
• Flameproof electrical fittings
• Water jacketed model

Mass Mixerhas been well-designed to facilitate thorough mixing of dry or damp materials and is especially suitable for tablet granulation. The powerful geared drive and sturdy mixing paddle make RIDDHI Mixer ideal for dealing with difficult or sticky ingredients. This is one speed Mixer but two speed machine available on demand.

The Mixer consists of Mixing drum complete in itself. It contains mixing drum body. Mixing paddle and sealing arrangement. The drum rests on rigid M.S. fabricated body carrying Motor, Gear box, Starter and tilting arrangement. The drive of mixing paddle is through suitable oil filled worm gear unit which in turn get drive through V belts from a suitable T.E.F.C. motor. The blades of the paddle are so arranged that thorough mixing is obtained. All parts which are in direct contact with the material to be mixed are of S.S. or neutral material. The main paddle runs in journals and supported by thrust bearings of ample size to carry rigid and thrust load. The whole drum of mixer makes ease of cleaning. The rotor is so designed that it can be removed, by removing the main shaft without much problem.

The material under mixing process can be apparently seen from the Plastic Dust Cover of the container at all times and it, being hinged and holding allows solution to be added through without difficulty while the mixer is in motion.

The plastic dust cover is so interlocked that on opening the cover the motor automatically stops. The interlocking system is given to avoid the accident as the machine will not start unless and until container is totally closed. This is of utmost importance in a machine like this which has revolving blades.

The Tilting Device is provided to ease the unloading of the material. Tilting is affected by means of a hand wheel on the body, the powder or granules being tipped into a container which can be placed at ease.

Specially designed self-adjusting sealing arrangement of unique design is provided to ensure that no black particle enters into the Mixing drum. However, little powder from inside may come out some time after a long use which suggests cleaning and readjusting of pressure springs.

Provision is made for lubricating all moving parts and specially designed to prevent oil coming in contact with the powder.

Multi Mill operates on the principle of variable force swing beaters rotating in process chamber with selected speed to get the desired size reduction with highly power efficient size reduction unit with wide ranging of applications.

Multi Millis widely used for wet and dry granulation, pulverisation etc. in Pharmaceuticals, Chemicals, Food, Ceramics, Pesticides, Fertilizers, Detergent, Plastics, Resin and other industries.

• S.S.316 in place of S.S.304 contact parts
• Flameproof electrical fittings
• GMP model in place of standard model