Our Products
In flat form plastic case with zero adjuster, having a dual metal scale with dual graduations, suspension ring and load hook. Capacity: 0 to 10 kgs (22 lbs).
Cast iron base with V-cut and riffled gas inlet. The ] burner tube is 12mm in diameter brass tube chrome-plated burner tube having a sleeve type air regulator around the jet nozzle to adjust the air-gas mixture.
Cast iron base with riffled gas inlet, a 12mm diameter brass tubechrome-plated burner tube having a screw type sleeve air regulator around the jet nozzle to adjust the air-gas mixture. The burner is supplied with 2 jets (for LP gas and Natural gas). Overall height 150mm.
A strong and stable support for laboratory equipment when precise height adjustments are required over the bench. The jack has a screw operated scissor-action mechanism and can be raised effortlessly by turning the handwheel. The loading platform has a threaded hole of 8 mm to accommodate a support rod.(Supplied without Rod).
Made from soft wood with hinged lid, lacquer polished, to hold microslides of 75 x 25 mm The slide slots are numbered for easy reference from the index.
Capacity
01 Holds 25 micro slides
02 Holds 50 micro slides
03 Holds 100 micro slides
PCH015Very good, quality porcelain crucibles, made to withstand temperatures up to 1150 degrees C. Glazed inside and out, except for outside bottom surface. Lids included.
Capacity
5 ml.
10 ml.
15 ml.
18 ml
25 ml.
30 ml.
50 ml.
80 ml
100 ml.
200 ml.
Made from finest quality sheet glass having a uniform thickness and ground edges. The slides are pre-cleaned and precision measured to 75 x 25 x 2mm, having 1, 2 or 3 cavities of 16 mm diameter and 0.8 mm deep.
Capacity
01 1 Concavity
02 2 Concavities
03 3 Concavities
Translucent, glazed supplied with lid.
Diameter Height NominalCap.
29 mm 19 mm 5 ml.
38 mm 19 mm 10 ml.
41 mm 25 mm 15 ml.
47 mm 28 mm 25 ml.
57 mm 37 mm 50 ml.
67 mm 45 mm 80 ml
82 mm 51 mm 130 ml.
A galvanized wire mesh with double turned edges to eliminate sharp wire ends, for use on tripod stands to protect and support glass vessels and spread the heat evenly while heating over a flame.
Ceramic Centre
Size
100 x 100 mm
125 x 125 mm
140 x 140 mm
150 x 150 mm
Cast iron base with riffled gas inlet and stopcock to regulate the flow of gas. The burner tube is 12mm in diameter, brass chrome-plated burner tube having a screw type sleeve air regulator around the jet nozzle to adjust the air-gas mixture. The burner is supplied with 2 jets (for LP gas and Natural gas) . Overall height 155mm
Made from finest quality sheet glass having a uniform thickness and ground edges. The slides are pre-cleaned and precision measured. Size: 75 x 25 x 1.35mm
(l x b x t)
Capacity 01 Plain
02 Frosted
Best quality solid red rubber stoppers having a Shore Hardness between 41 to 47 which are resistant to alkali, acid, and ammonia. Recommended for all general laboratory use. Available with 1 and 2 holes.
A good quality, general purpose filter paper with good retentive properties suitable for qualitative and quantitative work.
Circle Diameter
7 cm
9 cM
1 1 cm
12.5 cm
A box containing 5 booklets, each having 20 strips (65 x 10 mm) of test paper for determining the acidity (Blue Litmus) or alkanity (Red Litmus). Each box contains 100 strips (5 booklets x 20 strips).
Double convex lens fitted in a brass frame with a plastic handle.
Lens Diameter Focal Length Magnification
50 mm 20 cm 2.25X
50 mm 10 cm 3.5X
60 mm 20 cm 2.25X
75 mm 20 cm 2.25X
100 mm 20 cm 2.25X
Made from sheet metal and finished in white enamel. The stand can hold 6 Wintrobe tubes. Positions are numbered for easy identification.
Die cast, black powder coated with anodized aluminum rod and chrome-plated thumb screw. The 4 prong jaws are cork-lined and can hold 15 to 65 mm diameter objects.
Overall length: 250 mm.
A plastic box with removable lid having numbered slots to hold micro slides of 75 x 25 mm. The lid has an index for easy reference.
01 Holds 25 micro slides
02 Holds 50 micro slides
03 Holds 100 micro slides
Made from Borosilicate glass, these equilateral prisms are optically worked with 2 faces polished and most suitable foruse with a spectrometer.
Equilateral side Height (mm)
25 x 25
32 x 32
38 x 38The above sizes are available in the following Refractive Indices.
Crown Glass Refractive Index 1.15
approx.Dense Flint Glass Refractive Index 1.62 approx.Extra Dense Flint Glass ReRefractive Index 1.65 approx.Double Extra Dense Flint Glass Refractive Index 1.70 approx.(All Refractive Indices mentioned are approximate)
To demonstrate that a chemical reaction is permanent and irreversible. The ribbon when heated over a burner or spirit lamp burns with a dazzling light and produces dense white fumes, which upon cooling forms a new substance called magnesium oxide whose properties are different from the original magnesium ribbon.
Weight per roll 25g.
Cast iron in black crinkle finish fitted with chrome plated thumb screw, suitable for rod diameters from 9mm to 16mm.
These cork borers are of sharpened brass tubing with attached handles and numbered for easy identification. A brass chrome- plated ramrod is included for cleaning the borers.
01 Set of 6, Diameter 4-10 mm
02 Set of 12, Diameter 4-18 mm
03 Set of 18, Diameter 4-27 mm
04 This is an essential tool for sharpening all
hollow corkborers. It has a solid brass cone
with a hinged steel bladeand a wooden handle.
The set consists of 14 Instruments:
1 pc. Dressing Scissors 5" s.s.
1 pc. Cuticle Scissors 4-1/4" s.s.
1 pc. Dresing Forceps 5" s.s.
1 pc. Dissecting Forceps 4-1/2" s.s.
1 pc. Flapper s.s. 1 pc. Seeker s.s.
1 pc. Arrow Needle s.s.
1 pc. Needle s.s.
1 pc. Blow Pipe c.p.
2 pcs. Scalpels OR B.P. Handles with Scalpel Blades
1 pc. Razor s.s.
1 pc. Chain Hook
1 pc. Lens
The set is supplied in velvet lined box and packed in a printed box.
Equilateral and highly polished prisms. These economy model prisms are made from moulded glass and best suited for students performing basic experiments in refraction by the pin-sighting method.
Equilateral
Side (mm) x Height (mm)
25 x 25
38 x 38
50 x 50
Cast iron base with riffled gas inlet and 12mm diameter brass tube chrome-plated burner tube having a screw type sleeve air regulator around the jet nozzle to adjust the air- gas mixture. The burner is supplied with 2 jets (for LP gas and Natural gas