Welded, Semi Welded (Bolted)

Power Plant & Process Plant

• Power Control center [PCCs] normally comprise of either breaker panels only or breaker and MCC Panel coupled together [PMCCs].


• Breaker panels can be offered in single or two tier configuration.


• Breaker panels are suitable either for cable or bus duct entry from top or bottom.

IP-53/54/55

Weatherproof, corrosion protection against acid & Caustics up to IP-65

• Used as analyzer and sample processing unit, E-rooms


• Fully Insulated


• No Condensation


• Vary low heat gain from direct sunlight, fully dust and moisture free.

• Installation where space is premium like complexes, Airport, Malls, Industries etc.


• Designed to withstand surrounding temperature, humidity & condensation, rain, solar radiation.


• Designed keeping in mind the dielectric & Thermal isolation.


• Indigenously designed &tested for fast & easy installations


• High life expectancy under normal operating conditions.


• Maintenance free.

Every unit id factory-tested and contains the following:

• CRCA/GI metal enclosure with compartments.


• 11kv/12kv/VCB for connection to the 11kv/12kv network and also the protection circuits for the (HV/LV) transformers.


• Hermitically sealed transformers.


• LV switchboard with required rating.


• HV/LV Terminals.


• Appropriate ventilations.


• 4 point locking doors.


• Walkway busbars.

Our concept substation can be designed and customized to different sizes and configurations to fulfil the customers requirements.

Alcosy, Welded

Sub Station, Power Plant

• It is used for housing of various kinds of relays like auxiliary relays and protection relays.


• We provide fully engineered panel from your single line diagram to the complete solution.


• We supply the relay interlocking hardwired console with time delay circuits

Welded, Semi Welded (Bolted)

Power Plant & Process Plant

• Our MCC are made in fully compartmentalized modular design cabinet system designed for powering and controlling motors.


• As per standards IS 8623 & IEC 60439


• Our MCC are two types (1) Fixed type MCC (2) Drawout MCC Provision of single front and double front

Pyrotech has manufacturing various type of poles using indigenously developed proven technology since 2008. Our poless are rugged, maintenance free, corrosion free and easy to install. Poles manufacturing process includes Cutting, Bending, Welding, Galvanisation, Painting, Assembling which is performed on world class machines with highly skilled manpower.

Quick assembly with corner block and rolled sections. Uniform slots in frames member ensure flexibility for the internal arrangement of the instruments.

Specially designed gaskets and multifold enclosure aperture is angled upwards and provides increased stability and greater protection against dust and moisture, meeting the varying protection requirements up to IP-55.

In size, mountings, accessibility, finish. The cubicles can also be made to order.

Any number of panels can be stacked together horizontally as per layout and site requirements with easy and quick fixing hardware.

Interchangeability of doors, side sheet, removable cover and mounting plate.

We provide a completely customized solution which includes providing and fixing of various types of electrical instruments and their wiring.

Mainly used for housing of various kinds of relays like Auxiliary relay and protection relays. We provide engineered panel from your single line diagram to the complete solution. We supply the relay interlocking hardwired console with time delay circuits.

Construction: Welded, Alcosy, 8 Fold, 5 Fold also with wooden Top MOC: CRCA MS, SS, AI members. Application: Used as Computer console or in control room or used as mounting of counter & indication equipment.

Mosaic Panel is the most user friendly, reliable and economical approach to process visualization. It is suitable for all kinds of control and monitoring indicator board, for process control, power networks, & security etc.

Standard height of Draw-out MCC is 2400mm including base frame. The maximum operating height is 1800mm. For Single front 2400(H) X 850(W) X 600(D)mm For Double front 2400(H) X 850(W) X 1000(D)mm

Purge Panel/ enclosures are designed and developed for safe use of electrical products in highly explosive areas. Features: Purging is done as per NFPA-496. 3 Types: Purging Enclosures, Explosion Proof Enclosures & Normal Enclosures.

Aluminium is particularly durable & well suited in areas where corrosion problems exits. Aluminium based enclosures have wide range of application in electrical, electronic or pneumatic components in indoor & outdoor applications. Also an excellent choice for enclosures exposed to sea corrosion, solvents, petrochemicals & acids mainly sulphates & nitrates. Not suitable for alkaline application

• No welded seams or sharp corners, totally die casted.


• Captive cover screws of stainless steel provided.


• Mounting holes provided in corners outside of gaskets area.


• Holes given for equipment mounting.

NG cubical is used to install Neutral Grounding Transformer (NGT) and Neutral Grounding Resister (NGR) for grounding / earthing of neutral current during unbalanced three phase load of a generator, essentially required for protection of the generator winding.

Welded

• These LAVT cubicle are enclosure for housing:




• Lighting Arrestor [L.A.]


• Sugar Capacitor [S.C.]


• Voltage Transformer [V.T.]




• NG cubical is enclosure for installation of :




• Neutral Grounding Transformer [NGT]


• Neutral Grounding Resister [NGR]


• Current Transformer [C.T.]



Complete with bus bar & Rack, with Transformer + LA can be (Optial)