R A C Exports - Oscilloscopes

Leading Manufacturer, Supplier & Retailer of DC-20 MHz DUAL TRACE OSCILLOSCOPE, 5 MHz X-Y OSCILLOSCOPE, 2 MHz GENERAL PURPOSE OSCILLOSCOPE, DC-10 MHz SINGLE TRACE PORTABLE OSCILLISCOPE and Dual Trace Oscilloscope.

DC-20 MHz DUAL TRACE OSCILLOSCOPE

DC-20 MHz DUAL TRACE OSCILLOSCOPE
FEATURES: 20MHz/40MHz High sensitivity 1mV/div. Expanded vertical sensitivity to 10V ALT Triggering Function. Z-axis input, Ch1 output. Encoder for sweep & vertical sensitivity switch. 10 times sweep magnification. TV synchronization, X-Y mode. Triggering level lock function, automatic synchronize function. Build-in 6 digit frequency counter.(BF Model)

View Complete Details

Ask Latest Price & Details

5 MHz X-Y OSCILLOSCOPE

FREQUENCY RESPONCE10 Hz to 5 MHz (-3db).
SENSITIVITY10 mV P/P Division at 1KHz
INPUT IMPEDANCE1M Ohm shunted by 40 pf (approx.)
ATTENUATOR10m V/Div. to 20VDiv. in 11 step 1, 2, 5 sequence,
Accuracy+_ 10%
MAXIMUM INPUT VOLTAGE400 V P/P

5 MHz X-Y OSCILLOSCOPE

TECHNICAL SPECIFICATIONS:-

VERTICAL CHANNELSENSITIVITY : 10 mV P/P Division at 1KHzFREQUENCY RESPONCE : 10 Hz to 5 MHz (-3db).INPUT IMPEDANCE : 1M Ohm shunted by 40 pf (approx.)ATTENUATOR : 10m V/Div. to 20VDiv. in 11 step 1, 2, 5 sequence, Accuracy +_ 10%MAXIMUM INPUT VOLTAGE : 400 V P/P
HORIZONTAL CHANNELSENSITIVITY : 50mV P/P per Div. At 1 KHz .FREQUENCY RESPONSE 10 Hz to 1 MHz (-3db).INPUT IMPEDANCE : 1 Mohm shunted by 40 pf (approx.)ATTENUATOR : 50mV/Div. to 20VDiv. in 9 step 1, 2, 5 sequence
X-Y OPERATIONBAND WIDTH : 10Hz to 1MHzDEFLECTION FACTOR : 50 mV/Div. to 20V/Div.TIME BASE SWEEP FREQ./FREQUENCY : 10Hz to 1MHz in 10 Range with Vernier.SYCHRONISATION : 1. INTERNAL2. EXTERNAL3. LINE i.e. 50HzDISPLAY : 130mm Diameter CRT. Display Area 8 x 10 Cm.POWER REQUIREMEN

5 MHz X-Y OSCILLOSCOPE

TECHNICAL SPECIFICATIONS:-

T : 230 VAC +_ 10%

View Complete Details

Ask Latest Price & Details

2 MHz GENERAL PURPOSE OSCILLOSCOPE

FREQUENCY RANGE10Hz to 2MHz (-3db)
MAXIMUM SENSITIVITY 20mV P/P Cm. at1KHz.
ATTENUATORThree steps of 1:1, 1
INPUT IMPEDANCEApproximately 1M Ohm shunted by 40 pf.

2 MHz GENERAL PURPOSE OSCILLOSCOPE

SPECIFICATION

FREQUENCY RANGE : 10Hz to 2MHz (-3db)MAXIMUM SENSITIVITY 20mV P/P Cm. at 1KHz. :ATTENUATOR : Three steps of 1:1, 1: 10 and 1: 100 with in-between continuously variable control.INPUT IMPEDANCE : Approximately 1M Ohm shunted by 40 pf.

HORIZONTAL CHANNEL
MAXIMUM SENSITIVITY : 50mV P/P per Cm. at 1KHz.

FREQUENCY RANGE : 10Hz to 1MHz (-3db)INPUT IMPEDANCE : Approximately 1M Ohm shunted by 40 pf.
ATTENUATOR : Three steps of 1:1, 1: 10 and 1: 100 with in-betweencontinuously variable control.POWER REQUIREMENTS : 220V AC +_ 10%

View Complete Details

Ask Latest Price & Details

DC-10 MHz SINGLE TRACE PORTABLE OSCILLISCOPE

SENSITIVITY5mV/DIV~5V/DIV+3%
TRIMMING RATIO>2.5 :1
RISE TIME<35ns
BANDWIDTH(-3db)DC 0~10MHz C :10Hz~10MHz
INPUT IMPEDANCE1M63%, 30pF 5pF6
MAXIMUM INPUT VOLTAGE400 V pk

The Oscilloscope is a portable Oscilloscope with frequency bandwidth of 010MHz and sensitivity of 5mV/DIV5V/DIV. Equipped with 10:1 probe which makes the sensitivity up to 50V/div. Sweep at 0.1s/DIV0.1/s /DIV on horizontal system. The oscilloscope is easy to operate, and highly reliable. It is and ideal instrument for research, production, education, and development in electronic device or circuitry.

TECHNICAL SPECIFICATIONS:-VERTICAL SYSTEM:-
SENSITIVITY : 5mV/DIV5V/DIV+3%
TRIMMING RATIO : >2.5:1
RISE TIME : 2.5:1
TRIGGER SYSTEM
TRIGGER SENSITIVITY : INT: 1DIV, EXT: 0.3V
Ext. RIGGER INPUT IMPEDANCE : 1M 6, 30pF
Ext. TRIGGER MAX. INPUT VOLTAGE : 400Vpk
TRIGGER SOURCES : INT, LINE, EXT
TRIGER MODE : NORM, AUTO, TV
MODE
SENSITIVITY : 0.5V/DIV
BANDWIDTH (-3dB) : 10Hz500kHz
CALIBRATION SIGNAL
WAVEFORM : Symmetric Square Wave
RANGE : 0.5V+2%
FREQUENCY : 1kHz+2%
CRT
DISPLAY AREA : 8X100DIV 1DIV=6mm
ACCELERATION VOLTAGE : 1200V
DISPLAY COLOUR : Green
POWER SOURCE
VOLTAGE RANGE : 220V, +10%
FREQUENCY : 50Hz+2Hz

View Complete Details

Ask Latest Price & Details

Dual Trace Oscilloscope

DC-102030 MHz Bandwidth.SingleDual Trace And X-Y ModeSweep Magnification x10.2 Level Calibrator.Max. Input Voltage 400V(DC + peak AC).DC - 40 60 MHz Bandwidth.Dual Trace & X - Y Mode.Sweep Magnification x10Max. Input voltage 500V (DC + peak AC)

View Complete Details

Ask Latest Price & Details