Radiance Papers Pvt. Ltd. Delhi

• MOQ 100 Long Ton

We are offering aluminium scrap. Aa 6063 is an aluminium alloy, with magnesium and silicon as the alloying elements. The standard controlling its composition is maintained by the aluminum association. It has generally good mechanical properties and is heat treatable and weldable. It is similar to the british aluminium alloy he9. 6063 is mostly used in extruded shapes for architecture, particularly window frames, door frames, roofs, and sign frames. It is typically produced with very smooth surfaces fit for anodizing.

• Typealuminium circle, aluminium disc
• Thickness0.3mm--10mm
• TemperO, H12 H14 H16 H18 H22 H24 H26 H32
• Metal TypeAluminium Circle

Aluminium circle, aluminium disc 1)alloy: 1060, 1070, 1050, 1100, 1200, 3003, 3004, 3105, 5052, 6061, 8011 2)temper : o, h12 h14 h16 h18 h22 h24 h26 h32 3)thickness: 0.3---4mm 4)diamters: 100mm---980mm dimensions can be produced according to clients' specifications.

We are offering copper scrap. Specification copper wire scrap, (millberry) 99.78% at a purity of 99.78% min. 99.78%max. Copper: 99, 9% carbon: 0.03% coblet:

We are offering titanium scrap. Titanium and titanium alloys are attractive structural materials due to their high strength, low density, and excellent corrosion resistance. The recognition of titanium excellent resistance in highly corrosive environments has led to widespread non-aerospace industrial applications. Stemming from decreasing cost and increasing availability of mill and fabricated products, titanium alloys have become standard engineering materials for a host of common consumer products too.

We are offering magnesium scrap. His specification covers magnesium-alloy sand castings. The castings shall conform to the chemical composition limits specified. The castings may be subjected to such heat treatment as deemed necessary to produce material that will conform to the requirements specified. Heat treatment shall be performed on the whole casting and never on a portion. Foundry control shall consist of examination of the castings by radiographic or other approved methods for determining internal discontinuities until the gating, pouring, and other foundry practices have been established to produce castings meeting the quality standards. The tension test specimens representing the castings shall conform to the requirements.