Post Buy Requirement
RT
Mumbai, Maharashtra, India
Add Review

Our Products #5832248

Distribution Panel

A motor controller is a device or group of devices that serves to govern in some predetermined manner the performance of an electric motor. A motor controller might include a manual or automatic means for starting and stopping the motor, selecting forward or reverse rotation, selecting and regulating the speed, regulating or limiting the torque, and protecting against overloads and faults.Motor controllers can be manually, remotely or automatically operated. They may include only the means for starting and stopping the motor or they may include other functions.An electric motor controller can be classified by the type of motor it is to drive such as permanent magnet, servo, series, separately excited, and alternating current.A motor controller is connected to a power source such as a battery pack or power supply, and control circuitry in the form of analog or digital input signals.

Distribution panel:

Power distribution board is available with the specific requirements of the clients. These boards are specially designed, wired, tested and assembled with different electrical equipment. These power distribution boards are built in a way so as to ensure maximum safety, along with maximum space utilization and cost effectiveness. Also, it is helpful in saving the installation cost, cost of equipment storage, handling and field testing Customization provision is also offered on these panel

View Complete Details

Control Panel

We have manufactured PLC panels Modicon PLC for LARSEN & TOUBRO LTD control & Automation Division - Mahape for the following customers:

  • Indian Oil Corporation Ltd (IOCL) LAB Plant - Baroda.
  • Chedha Paper Limited, - Calcutta.
  • Songo Gas Development (Tanzania)
  • National Thermal Power Corporation (NTPC) - Ramagundam
  • Bhillai Steel Plant - Bhillai
  • Nuclear Power Corporation (NPC) - Tarapur
  • Ramrupai Steel
View Complete Details

Apfc Panels

We are highly specialized in manufacturing of the APFC Panels. The power factor controller of our APFC Panels monitors the reactive power which inturn helps in saving energy. APFC Panels are available with capacitors which have built in protective devices for cutting extra power. APFC Panels manufactured by us are in accordance of requite norms and standards.

APFC Panel features:

  • Our APFC Panel is made from rust proof steel material
  • Circuits are equipped with independent fuses in our APFC Panels
  • APFC Panels are equipped with capacitors with series reactors for minimizing harmonic current which may alter system voltage & current

APFC Panels have the following uses and applications:

  • Micro processors
  • LT & HT factories
  • Electrical installations
  • Analyzing line voltage
  • Process controllers
View Complete Details

Lt Panels

We are effectively engaged in manufacturing of LT control panel and electrical LT panel which are widely used in the foundries, apartments, textiles and other varied industries. The LT panel which is manufactured in our plant is good example of the performance and excellence.

Customization provision is also offered on these panels. It has following features:

  • Minimum Maintenance
  • Cost Effectiveness
  • User Friendly
  • Wide Demand
View Complete Details

Emergency Call Box

A perfect audio quality is guaranteed by the digital technology used for the treatment. This Facility allows a simple first service of the Emergency call box and multi-communication on the Same network. Setting and diagnostics of interfaces (alarm level, audio output level) are directly done on the call box through consol port. Primary and secondary call box can be electronic free to simplify maintenance. Operation when a call box is out of service or when the optical cable is broken. As an option the network interface can be redundant to secure a full operation of the network in case of failure of the head call controller.

Standard Call Box

Call box bodies are able to receive optoelectronic ECB interface. It is also possible to fit this interface in the underground cabinet, near to the ECB. This configuration protects the electronic even an accident pulls out the call box, and so reduces the cost of repair. The ECB is containing the power supply of the electronic; this one comprises a 12 volts battery recharged by a solar panel for outside fitting or a main charger for tunnel application's loud speaker, microphone and push button, at the ECB door assume the communication interface between the operator and road user. On the call box stickers will be apply following the standard or as recommendation of the particular specifications.

Compact Call Box

The compact call box type solves the disposal on narrow place (Road, bridge or tunnel), there is no foot for ground positioning, fixation is done directly on the wall by the bottom of the call box or with a special mounting leg adapt to the site condition. This call box is able to receive optoelectronic interface and the two types of power supply; it is equipped of the same door as the standard one. Standard stickers can be applying on this ECB model.

Battery solar panel power supply

Primary call boxes are supplied with an encastrement fitting for solar panel capable to Maintain the charge of the battery which powers the ECB optoelectronic interface. This embedding at the edge of the call box assumes discretion and protection of the solar Cell.

View Complete Details

Fabrication

We have in house strength in designing and manufacturing tools required for operations of the panel shop.

The list of machines as listed below :

  1. NC Press Brake
  2. Shearing Machine
  3. Mig welding machine
  4. Bus Bar Shearing, Punching & Bending Machines

We manufacture our panels with high quality raw material only. The sheets are inspected for thickness, bending and rust etc. The welding is done with arc welding transformer. We inspect the panel at every stage of manufacturing i.e. Bending, welding, finishing etc. After grinding and finishing, we apply sander on welded surfaces.

Our Press Parts facility and Machinery

  • 20 Ton power press un geared inclinable
- 1 no
  • 25 Ton power press geared inclinable
- 1 no
  • 50 Ton power press geared inclinable
- 1 no
  • 50 Ton power geared inclinable
- 1 no
  • 75 Ton power press geared inclinable
- 1 no
  • 100 Ton power press geared Pillar type
- 1 no
  • 160 Ton power press geared Pillar type
- 1 no
  • Shearing 8ft * 4mm thickness
- 1 no
  • Surface Grinder
- 1 no
  • Bench grinder Machine 0.75 2 hp
- 2 nos
  • Drilling Machine " cap
- 4 nos
  • Tapping Machine TM /5 MM 2 nos & 13MM
- 2 nos
  • CO2 Welding Machine 400k
- 1 no

Our Fabrication facility in Khopoli the details are as below:

Survey .No, 4/8A/8B, Viilage Parli, khopoli - Pali Road, Taluka - Sudhagadh, Raigadh 410205, Tel 0214-2244315

View Complete Details

Drive Panel

We designed and manufactured AC/DC Drive panels of ratings up to 300 KW for Cement, Metal , Chemical and material handling Industriesfor LARSEN & TOUBRO LTD control & Automation Division - Mahape for the following customers:

  • Indian Oil Corporation Limited
  • Indo Bharat Rayon (Indonesia)
  • Rajshree Cement
  • J.K Cement
  • Birla Cement
  • L&T Cement
  • Sunflag Iron Steel
  • Jindal Steel (Hisar)
  • Songo Gas Development (Tanzania)
  • NALCO
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

Browse Our Products list of Radiant Technologies Mumbai, Maharashtra
Post Buy Requirement
RT
Mumbai, Maharashtra, India
Add Review

Our Products #5832248

Distribution Panel

A motor controller is a device or group of devices that serves to govern in some predetermined manner the performance of an electric motor. A motor controller might include a manual or automatic means for starting and stopping the motor, selecting forward or reverse rotation, selecting and regulating the speed, regulating or limiting the torque, and protecting against overloads and faults.Motor controllers can be manually, remotely or automatically operated. They may include only the means for starting and stopping the motor or they may include other functions.An electric motor controller can be classified by the type of motor it is to drive such as permanent magnet, servo, series, separately excited, and alternating current.A motor controller is connected to a power source such as a battery pack or power supply, and control circuitry in the form of analog or digital input signals.

Distribution panel:

Power distribution board is available with the specific requirements of the clients. These boards are specially designed, wired, tested and assembled with different electrical equipment. These power distribution boards are built in a way so as to ensure maximum safety, along with maximum space utilization and cost effectiveness. Also, it is helpful in saving the installation cost, cost of equipment storage, handling and field testing Customization provision is also offered on these panel

View Complete Details

Control Panel

We have manufactured PLC panels Modicon PLC for LARSEN & TOUBRO LTD control & Automation Division - Mahape for the following customers:

  • Indian Oil Corporation Ltd (IOCL) LAB Plant - Baroda.
  • Chedha Paper Limited, - Calcutta.
  • Songo Gas Development (Tanzania)
  • National Thermal Power Corporation (NTPC) - Ramagundam
  • Bhillai Steel Plant - Bhillai
  • Nuclear Power Corporation (NPC) - Tarapur
  • Ramrupai Steel
View Complete Details

Apfc Panels

We are highly specialized in manufacturing of the APFC Panels. The power factor controller of our APFC Panels monitors the reactive power which inturn helps in saving energy. APFC Panels are available with capacitors which have built in protective devices for cutting extra power. APFC Panels manufactured by us are in accordance of requite norms and standards.

APFC Panel features:

  • Our APFC Panel is made from rust proof steel material
  • Circuits are equipped with independent fuses in our APFC Panels
  • APFC Panels are equipped with capacitors with series reactors for minimizing harmonic current which may alter system voltage & current

APFC Panels have the following uses and applications:

  • Micro processors
  • LT & HT factories
  • Electrical installations
  • Analyzing line voltage
  • Process controllers
View Complete Details

Lt Panels

We are effectively engaged in manufacturing of LT control panel and electrical LT panel which are widely used in the foundries, apartments, textiles and other varied industries. The LT panel which is manufactured in our plant is good example of the performance and excellence.

Customization provision is also offered on these panels. It has following features:

  • Minimum Maintenance
  • Cost Effectiveness
  • User Friendly
  • Wide Demand
View Complete Details

Emergency Call Box

A perfect audio quality is guaranteed by the digital technology used for the treatment. This Facility allows a simple first service of the Emergency call box and multi-communication on the Same network. Setting and diagnostics of interfaces (alarm level, audio output level) are directly done on the call box through consol port. Primary and secondary call box can be electronic free to simplify maintenance. Operation when a call box is out of service or when the optical cable is broken. As an option the network interface can be redundant to secure a full operation of the network in case of failure of the head call controller.

Standard Call Box

Call box bodies are able to receive optoelectronic ECB interface. It is also possible to fit this interface in the underground cabinet, near to the ECB. This configuration protects the electronic even an accident pulls out the call box, and so reduces the cost of repair. The ECB is containing the power supply of the electronic; this one comprises a 12 volts battery recharged by a solar panel for outside fitting or a main charger for tunnel application's loud speaker, microphone and push button, at the ECB door assume the communication interface between the operator and road user. On the call box stickers will be apply following the standard or as recommendation of the particular specifications.

Compact Call Box

The compact call box type solves the disposal on narrow place (Road, bridge or tunnel), there is no foot for ground positioning, fixation is done directly on the wall by the bottom of the call box or with a special mounting leg adapt to the site condition. This call box is able to receive optoelectronic interface and the two types of power supply; it is equipped of the same door as the standard one. Standard stickers can be applying on this ECB model.

Battery solar panel power supply

Primary call boxes are supplied with an encastrement fitting for solar panel capable to Maintain the charge of the battery which powers the ECB optoelectronic interface. This embedding at the edge of the call box assumes discretion and protection of the solar Cell.

View Complete Details

Fabrication

We have in house strength in designing and manufacturing tools required for operations of the panel shop.

The list of machines as listed below :

  1. NC Press Brake
  2. Shearing Machine
  3. Mig welding machine
  4. Bus Bar Shearing, Punching & Bending Machines

We manufacture our panels with high quality raw material only. The sheets are inspected for thickness, bending and rust etc. The welding is done with arc welding transformer. We inspect the panel at every stage of manufacturing i.e. Bending, welding, finishing etc. After grinding and finishing, we apply sander on welded surfaces.

Our Press Parts facility and Machinery

  • 20 Ton power press un geared inclinable
- 1 no
  • 25 Ton power press geared inclinable
- 1 no
  • 50 Ton power press geared inclinable
- 1 no
  • 50 Ton power geared inclinable
- 1 no
  • 75 Ton power press geared inclinable
- 1 no
  • 100 Ton power press geared Pillar type
- 1 no
  • 160 Ton power press geared Pillar type
- 1 no
  • Shearing 8ft * 4mm thickness
- 1 no
  • Surface Grinder
- 1 no
  • Bench grinder Machine 0.75 2 hp
- 2 nos
  • Drilling Machine " cap
- 4 nos
  • Tapping Machine TM /5 MM 2 nos & 13MM
- 2 nos
  • CO2 Welding Machine 400k
- 1 no

Our Fabrication facility in Khopoli the details are as below:

Survey .No, 4/8A/8B, Viilage Parli, khopoli - Pali Road, Taluka - Sudhagadh, Raigadh 410205, Tel 0214-2244315

View Complete Details

Drive Panel

We designed and manufactured AC/DC Drive panels of ratings up to 300 KW for Cement, Metal , Chemical and material handling Industriesfor LARSEN & TOUBRO LTD control & Automation Division - Mahape for the following customers:

  • Indian Oil Corporation Limited
  • Indo Bharat Rayon (Indonesia)
  • Rajshree Cement
  • J.K Cement
  • Birla Cement
  • L&T Cement
  • Sunflag Iron Steel
  • Jindal Steel (Hisar)
  • Songo Gas Development (Tanzania)
  • NALCO
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us