Insulation Displacement Connectors (IDC) provide the fastest method to add a connector to a cable by eliminating screw terminals, soldering, and the need to strip each conductor. No special tools are required. Pepperl+Fuchs Insulation Displacement Connectors can terminate a wide range of wire gauges, providing an efficient, tight, and reliable connection.

The newest version of our label detector is compact and high-speed. It is engineered to detect labels on a roll independent of color, printing or glossiness. High-speed applications are no problem for this sensor with its 600 s response time. Separate outputs are available for the label and the label base. The ULB will automatically compensate for slowly changing ambient conditions.

Multi-port junction blocks are available in 4-, 6-, or 8-port models and greatly reduce installation times by consolidating all your field wiring into one compact block. They can be ordered in a variety of cable lengths and quick disconnects to suit your application requirements. LED indicators for power and status and an IP67 protection rating are standard on all models.

A comprehensive range of M12 Micro DC cordsets is available in a variety of cable types, including PVC, PUR, and irradiated PUR in gray or yellow. Standard lengths range from two to ten meters, although custom lengths are offered. High pressure washdown, IP68/IP69K versions are also available.

Competitively priced, high performanceM and SP units are suitable for both side-opening or centre-opening doorsSuitable for dynamic or static installationsIP65/NEMA 4 water and dust resistant154 criss-cross beamsNo on-site adjustment requiredNo special cables requiredImmune to interference from reflection or sunlightSMT electronics with proven technology and reliabilityEasy installation without need to expose componentryHigh impact vandal resistant materialsTested to CE requirementsTested to exceed requirements of EN81-70 and GB7588-2003
Two power supply options: 10-30V DC or 10-40V DCOptically isolated solid state relay output. Two versions available: N/O or N/C contacts

Ultrasonic double sheet detection detects the difference between no sheet (air), single sheet, and double sheets. The standard 18 mm diameter unit detects paper, thin plastics, and foils with weights from 10 g/m2 to 2000 g/m2. The sensor is equipped with four evaluation programs to detect a variety of materials. No TEACH-IN is required, and an output pulse extension of 120 ms is possible. The 30 mm ultrasonic double sheet detectors offer the same features as the standard version while providing a larger (50 mm - 150 mm) separation range and the ability to detect thicker materials. The UDCM-30GM-085 metal sheet detection sensor ensures that only one metal sheet feeds to the press by detecting the difference between a single or double sheet of metal.

SLA Series Single Beam Safety Sensors are workhorses on the factory floor. Versions with compact, die-cast housings can fit into tight spaces. Other versions with operating ranges to 65 m can easily be used to safeguard along conveyors and around larger machinery. Used together with the SafeBox Controller, all are approved to Type 4 (according to IEC 61496-1, -2) and suitable for Category 4 applications per EN-954-1.

PosiTrack code rail is available in fiber-laminate or stainless steel and provides a unique positional code for every 0.8 mm of read head travel. General-purpose environments best suit the fiber-laminate material, while those requiring increased mechanical rigidity or corrosion immunity utilize the stainless type. All rail types can be horizontally curved with no affect on the read heads accuracy. Fiber-laminate rails can also be flexed for vertical bends.

Entry/exit safeguarding is easily accomplished with SLC Light Grids, available in 2-, 3-, or 4-beam versions, with an operating range to 20 m. Classified Type 4 according to IEC 61496-1 and -2, they are suitable for Category 4 applications per EN 954-1. They can be used as a self-contained 2-piece system, or with the SafeBox Controller for applications requiring muting or integration with other safety devices.

Insulation Displacement Connectors (IDC) provide the fastest method to add a connector to a cable by eliminating screw terminals, soldering, and the need to strip each conductor. No special tools are required. Pepperl+Fuchs Insulation Displacement Connectors can terminate a wide range of wire gauges, providing an efficient, tight, and reliable connection.

The newest version of our label detector is compact and high-speed. It is engineered to detect labels on a roll independent of color, printing or glossiness. High-speed applications are no problem for this sensor with its 600 s response time. Separate outputs are available for the label and the label base. The ULB will automatically compensate for slowly changing ambient conditions.

Multi-port junction blocks are available in 4-, 6-, or 8-port models and greatly reduce installation times by consolidating all your field wiring into one compact block. They can be ordered in a variety of cable lengths and quick disconnects to suit your application requirements. LED indicators for power and status and an IP67 protection rating are standard on all models.

A comprehensive range of M12 Micro DC cordsets is available in a variety of cable types, including PVC, PUR, and irradiated PUR in gray or yellow. Standard lengths range from two to ten meters, although custom lengths are offered. High pressure washdown, IP68/IP69K versions are also available.

Competitively priced, high performanceM and SP units are suitable for both side-opening or centre-opening doorsSuitable for dynamic or static installationsIP65/NEMA 4 water and dust resistant154 criss-cross beamsNo on-site adjustment requiredNo special cables requiredImmune to interference from reflection or sunlightSMT electronics with proven technology and reliabilityEasy installation without need to expose componentryHigh impact vandal resistant materialsTested to CE requirementsTested to exceed requirements of EN81-70 and GB7588-2003
Two power supply options: 10-30V DC or 10-40V DCOptically isolated solid state relay output. Two versions available: N/O or N/C contacts

Ultrasonic double sheet detection detects the difference between no sheet (air), single sheet, and double sheets. The standard 18 mm diameter unit detects paper, thin plastics, and foils with weights from 10 g/m2 to 2000 g/m2. The sensor is equipped with four evaluation programs to detect a variety of materials. No TEACH-IN is required, and an output pulse extension of 120 ms is possible. The 30 mm ultrasonic double sheet detectors offer the same features as the standard version while providing a larger (50 mm - 150 mm) separation range and the ability to detect thicker materials. The UDCM-30GM-085 metal sheet detection sensor ensures that only one metal sheet feeds to the press by detecting the difference between a single or double sheet of metal.

SLA Series Single Beam Safety Sensors are workhorses on the factory floor. Versions with compact, die-cast housings can fit into tight spaces. Other versions with operating ranges to 65 m can easily be used to safeguard along conveyors and around larger machinery. Used together with the SafeBox Controller, all are approved to Type 4 (according to IEC 61496-1, -2) and suitable for Category 4 applications per EN-954-1.

PosiTrack code rail is available in fiber-laminate or stainless steel and provides a unique positional code for every 0.8 mm of read head travel. General-purpose environments best suit the fiber-laminate material, while those requiring increased mechanical rigidity or corrosion immunity utilize the stainless type. All rail types can be horizontally curved with no affect on the read heads accuracy. Fiber-laminate rails can also be flexed for vertical bends.

Entry/exit safeguarding is easily accomplished with SLC Light Grids, available in 2-, 3-, or 4-beam versions, with an operating range to 20 m. Classified Type 4 according to IEC 61496-1 and -2, they are suitable for Category 4 applications per EN 954-1. They can be used as a self-contained 2-piece system, or with the SafeBox Controller for applications requiring muting or integration with other safety devices.