Our Products
The 'RENUKA' range of hydraulic cylinders are designed & engineered for almost every conceivable application odd low, medium and high pressure hydraulic system.The product backed by people with over 15 years of experience in the field of fluid power, offers a perfect fusion of top quality & economical prices resulting in a very high degree of customer stisfaction.
Range :Bore-Up to 350 RPM.Stroke - Up to 3000 RPM.Pressure - Up to 160, 250, 350 BAR
Construction Features :1) Suitable for heavy duty applications up to 160 KG/SQ.CM & 250 KG/SQ.CM.2) Welded construction or tie road type for regidity.3) Surface finish of micro honed tubes - 0.5 Ra or better.4) Piston rods-ground, hard chrome plated and re-ground to finish better then 0.1 Ra for longer seal life.5) Provision of bleed screw at both ends.6) Option of minimum two rod sizes for each bore.
Design Features :1) Piston rod of En-8 material.2) Rod bearing - extra long cartridge houses wiper seal and non-metallic high abrasion resistant wear bands.3) Rod seal of high abrasion resistant and durable life compound. .4) Piston bearing-non .metallic, high abrasion resistant wear bands.5) Bouble lip wiper of nitrile rubber to prevent entry of foreign particles into the cylinder.
Model |
Type |
Application |
Mounting |
Variations |
PC 160 |
Double acting bore-40-100 working pressure 160 |
Clevis mounting spherical bearing |
Light duty cylinder |
Single acting surface treatment |
PC 250 |
Double acting bore-40-250 working pressure 250 |
Clevis mountingspherical bearingfront flange rear flange turnion mounting |
Medium duty cylinder |
Damping special seals surface treatment single acting |
PC 350 |
Double acting bore-40-300 working pressure 350 |
Clevis mounting spherical bearing front flange rear flange |
Heavy duty cylinder |
Damping special seal surface treatment single acting |
PCP 250 |
Double acting bore-40-100 |
Clevis mounting front flange rear flange |
Special seals surface treatment single acting |
Choice of Programmable Press Brakes NC Stroke (Y-axis) with LED Control : | ||
| ||
NC Stroke, NC Back Gauge (Y & X axis) with LCD Control : | ||
| ||
Rear Cylinder Drive and its Benefits : | ||
| ||
Choice of Feature packed Press Brakes Basic model with SIngle Stroke Setting : | ||
| ||
Standard Features : Accessories for Basic Model | ||
Ram travel repeatable within 0.03mmfor consistent bends for interchangeable output. Ram travel is referenced from bed to aboid side frame deflections affecting stroke accuracy. Rugged structure from ultra tested IS 2062 grade B plates, rigidity conforming to international standards. Hydraulics, electrical fo internationally reputed brands for consistent performance and reliable opration. Front operated manual back gauge Front sheet supports with scale most hydraulic parts for 310 bar but working design with replaceable liners. Pivots with permanently lubricated bearings or hardened parts lubricated by central hand pump cylinders of ultra-tested seamless honed tubes, hard chrome-plated pistron, dual seals (Teflon ring plus set of chevron packing's) for extra reliabilty. 3-speed bending cycles for faster output yet slow smooth bending with minimal shck loads. Movable control station with majority controls, emergency stop, up-down foot-switch controls. Inch cycle mode for set-up and one-off jobs. Single cycle modes for repeat cycle, production runs. Main cylinders seals can be easily replaced without requiring crane or dismantling the ram. Hydraulic power gives silent working, better safety against overload, instant stoppage-reversal of ram One set of unhanded standard punch, multi-vee die Block Lifting chains system and rotation of die block when using multi-vee die block. |
Model | Tonnage | Table Length (mm) | Bending Capacity (approx) mm | Table Width (mm) | Clear Pass (mm) | Ram Stroke (mm) | Open Height (mm) | Throat Depth (mm) | Speeds Approach Pressing Return mm/sec. | Power H.P. | |
RPB214 | 20 | 1400 | 2x1250 | 3x800 | 125 | 1050 | 100 | 250 | 100 | 35-10-40 | 3 |
RPB320 | 30 | 2100 | 2x2000 | 3x1250 | 125 | 1550 | 100 | 250 | 200 | 30-7-30 | 3 |
RPB425 | 40 | 2500 | 2x2500 | 3x1500 | 180 | 2050 | 100 | 250 | 200 | 40-8-45 | 5 |
RPB515 | 50 | 1500 | 4x1500 | 5x1250 | 180 | 1050 | 100 | 250 | 200 | 40-7-42 | 5 |
RPB520 | 50 | 2100 | 3x2000 | 4x1500 | 180 | 1550 | 100 | 250 | 200 | 40-7-42 | 5 |
RPB525 | 50 | 2500 | 2.5x3000 | 3x2000 | 180 | 2050 | 100 | 250 | 200 | 40-7-42 | 5 |
RPB625 | 65 | 2500 | 3x2500 | 4x2000 | 180 | 2050 | 150 | 330 | 200 | 28-5-40 | 5 |
RPB630 | 65 | 3100 | 2.5x3000 | 4x2500 | 180 | 2550 | 150 | 330 | 200 | 28-5-40 | 5 |
RPB825 | 80 | 2500 | 4x2500 | 5x2000 | 180 | 2050 | 150 | 330 | 200 | 38-6-45 | 7.5 |
RPB830 | 80 | 3100 | 3x3000 | 4x2500 | 180 | 2550 | 150 | 330 | 200 | 38-6-45 | 7.5 |
RPB1025 | 100 | 2500 | 5x2500 | 6x2000 | 180 | 2050 | 150 | 330 | 200 | 40-6-45 | 10 |
RPB1030 | 100 | 3100 | 4x3000 | 5x2500 | 180 | 2550 | 150 | 330 | 200 | 40-6-45 | 10 |
RPB1040 | 100 | 4100 | 3x4000 | 4x3000 | 180 | 3550 | 150 | 330 | 300 | 40-6-45 | 10 |
RPB1225 | 125 | 2500 | 6x2500 | 8x2000 | 230 | 2050 | 150 | 350 | 300 | 38-5-42 | 15 |
RPB1230 | 125 | 3100 | 5x3000 | 6x2500 | 230 | 2550 | 150 | 350 | 300 | 38-5-42 | 15 |
RPB1240 | 125 | 4100 | 4x3500 | 5x3000 | 230 | 3500 | 150 | 350 | 300 | 38-5-42 | 15 |
RPB1625 | 160 | 2500 | 8x2500 | 10x2000 | 230 | 2050 | 150 | 350 | 300 | 35-6-45 | 20 |
RPB1630 | 160 | 3100 | 6x3000 | 8x2500 | 230 | 2550 | 150 | 350 | 300 | 35-6-45 | 20 |
RPB1640 | 160 | 4100 | 5x4000 | 6x3000 | 230 | 3100 | 200 | 350 | 300 | 38-6-45 | 20 |
RPB2030 | 200 | 3100 | 8x300 | 10x2000 | 230 | 2550 | 200 | 400 | 300 | 35-7-45 | 25 |
RPB2040 | 200 | 4100 | 6x4000 | 8x3000 | 230 | 3100 | 200 | 400 | 300 | 38-6-45 | 25 |
RPB2050 | 200 | 5100 | 5x5000 | 6x4000 | 230 | 4100 | 200 | 400 | 300 | 35-7-45 | 25 |
RPB2530 | 250 | 3100 | 10x3000 | 12x2500 | 300 | 2550 | 200 | 400 | 300 | 35-7-45 | 30 |
RPB2540 | 250 | 4100 | 8x4000 | 10x3000 | 300 | 3100 | 200 | 400 | 300 | 35-7-45 | 30 |
RPB2550 | 250 | 5100 | 6x5000 | 8x4000 | 300 | 4100 | 200 | 400 | 300 | 35-6-42 | 30 |
RPB3030 | 300 | 3100 | 12x3000 | 15x2500 | 300 | 2550 | 200 | 400 | 300 | 35-6-42 | 30 |
RPB3040 | 300 | 4100 | 10x3500 | 12x3000 | 300 | 3100 | 200 | 400 | 300 | 35-6-42 | 30 |
RPB3050 | 300 | 5100 | 8x4600 | 10x3500 | 300 | 4100 | 200 | 400 | 300 | 30-6-38 | 30 |
RPB4030 | 400 | 3100 | 16x3000 | 20x2500 | 300 | 2550 | 250 | 500 | 350 | 30-6-38 | 40 |
RPB4040 | 400 | 4100 | 12x4000 | 16x3000 | 300 | 3100 | 250 | 500 | 350 | 30-6-38 | 40 |
RPB4050 | 400 | 5100 | 10x5000 | 12x4000 | 300 | 4100 | 250 | 500 | 350 | 25-5-40 | 40 |
RPB5030 | 500 | 3100 | 20x3000 | 25x2500 | 300 | 2550 | 250 | 500 | 350 | 25-5-40 | 50 |
RPB5040 | 500 | 4100 | 12x4000 | 20x3000 | 300 | 3100 | 250 | 500 | 350 | 25-5-40 | 50 |
RPB5050 | 500 | 5100 | 12x5000 | 15x4000 | 300 | 4100 | 250 | 500 | 350 | 25-5-40 | 50 |
It is use for Making Presser Cooker, Vesseles, Oil Tank, Petrol Tank, Auto Parts, Kitchenware Products etc.
'C' frame are fabricated out of mild steel plate generously designed to with stand heavy working conditions with minimum stretching and deflection. The fabricated members of the press are stress relived.Two plates are bound together with welded support and tie rods. Precise machining of the structural members is done after normalizing to get the required accuracy like parallelism between platen and bed, right angularity between bed and the moving platen. Applications : It's highly applicable for high production of small jobs.Special presses are also available with high ram speeds.
Power Supply :400/440 volts, 3 phase, 50 cyckes as day to day improvement are contemplated for better performance of machine, we reserve the rights to alter the specifications without prior notice. all dimensions are in mm.
Uses & Applications :Auto Service Station, Repairing workshop, Pressing ball bearings, Removal of old bushed and mounting new bushes, Industries engaged with the work of straightening. Pressing, Drawing, Embossing, Broaching, Bending, Breaking and Joining of steel, Iron, Plastic, Rubber & Plywood, Electric Motor, Gold / Silver Coin / Monogram Embossing, SUbmersible Pump, Mosaic Tiles.
Frame :The Crown column and Bottom are mild steel fabricated construction. The table is vertically operated by worm winch and it rest on load pin placed in holes in column at required height. Rollers are provided with the table for wasy handling of heavy jobs.
Cylinder :The Hydraulic Cylinder & Ram are made from mild steel. Neoprene rubber pressure seal is mounted at bottom of ram. Socket is provided to facilitate attachment of dies with ram.
Hand Pump :Double plunger pump gives quick ram travel by low pressure plunger and slow speed develops with high pressure plunger.
Power Pack :The Suitable hydraulic power pack provided with the unit includes eighter Gear Pump. Vane pump or plunger pump graven by an electic motor of required brand, control valves, connecting hoses & pipes etc.
Capacity in Tonne | Distance Between Column in M.M. | Distance Between Ram to Bed in M.M. | Travel of Ram Hand Operated | Travel of Ram Power Operated | Motor H.P. |
5 | 625 x 200 | 150 x 550 | 100 | 125 | 0.5 |
15 | 800 x 225 | 150 x 750 | 120 | 175 | 1 |
25 | 850 x 300 | 175 x 850 | 125 | 175 | 1.5 |
40 | 1000 x 400 | 175 x 1000 | 150 | 200 | 2 |
60 | 1050 x 450 | 175 x 1050 | 150 | 200 | 3 |
75 | 1200 x 450 | 180 x 1200 | 180 | 225 | 3 |
100 | 1275 x 525 | 180 x 1275 | 200 | 225 | 5 |
150 | 1375 x 625 | 200 x 1425 | 200 | 250 | 7.5 |
200 | 1450 x 730 | 200 x 1500 | 200 | 300 | 10 |