Dampers are used to cut-off HVAC, Air conditioning heating or cooling to an unused area. Also use to regulate room temperature or other environmental parameters. We provide Volume control Dampers, Fire damper, Collar damper etc.

The VRF(Variable Refrigerant Flow) system is the latest and most glamorous entrant into the packaged air conditioner market. This technology originated in Japan and is now picking up in China and Korea. At present there are more than 20 manufacturers of VRF type products in the world.In general, VRFs consist of a number of indoor units connected to a single outdoor unit. They allow refrigerant flow from the outdoor unit to be varied. The technology used is either an inverter-driven compressor for speed control or a digital scroll compressor. A VRF system is provided with only one distribution port on the outdoor unit. Each indoor unit is provided with an electronic expansion valve, which continually adjusts the flow of refrigerant to respond to the load requirements in individual areas. Thus the temperature inside is maintained at virtually constant levels as against the variation caused due to on off cycles of conventional packaged ACs. For larger capacities, multiple outdoor units can be used.Being modular, outdoor units are so compact that they can be carried through commercial freight elevators. Another advantage is that it can accommodate relatively larger lengths of refrigerant piping. VRF is easy to install, run and maintain as compared to conventional Chilled Water Air-conditioning plant.With Digital Scroll: The Digital Scroll compressor modulates the refrigerant flow to meet varying cooling loads and deliver enormous saving on electricity bills. This high technology compressor coupled with advance controllers makes it a very effective refrigeration system.

Air Shower, self contained factory assembled system in S.S. 304 CONSTRUCTION designed to deliver a spray of moving air at approximately 6000 ft. per minute, from adjustable nozzles in the ceiling and opposing walls to departiculate fully gowned personnel just before they enter controlled environments.

Our filters are well known for their impeccable craftsmanship, quality and reliability of performance, and quiet and cost efficient operation. We also provide Hepa filters for any biological safety cabinet, laminar flow hood, or air handler. HEPA air purifiers come with a pre-filter to filter out large particulate, a carbon filter to adsorb odors, and a HEPA filter to filter particulate down to 0.3 microns in size.

MOC-18 G GI Powder coated with bottom operating arrangement & Bottom Loading filter arrangement. SS 304, Aluminum powder coated Perforated sheet with capsule Punching. Terminal Boxes can be made tailor customer specifications.

ouble Skin Air Handling Units completely redesigned with a 'Screwless Cabinet' construction. These units have a casing made of sandwiched panels, resulting in low noise, sturdy construction and better thermal insulation. Taper wedges are used for fixing and locking the insulated panels with aluminum frame.

Double skin Air Handling Units having Non thermal break and complete with mixing plenum, stainless steel drain tray, 6 Row DX cooling coil, fresh air intake having damper, 10 Micron pre-filter section, 5 micron Microvee filters, Kruger make Blower with flexible connection, crompton make motor and belt drive package.

Dynamic Pass Box In S.S. 304 (18 G) Double Walled Construction having built-in coving on all four inside corners with HEPA Filtered Air, and comprising, as standard features; prefilter (5 micron); motor-blower assembly/ies; MINIPLEAT HEPA filter/s (99.995% efficiency with 0.3 micron filtration); recirculatory plenum; fully toughened glass doors, Differential Pressure Gauge/s; stainless steel flanges (40mm) on entry side; ON / OFF switches for blower & lights; electromagnetic interlocking arrangement with GO-NO-GO indication.

Unidirectional Horizontal Air Flow Clean Air Work Station in S.S. 304 CONSTRUCTION and comprising, as standard features, MINIPLEAT HEPA filter/s with 0.3 micron filtration; prefilter/s (5 micron); suitable motor blower assembly lies; table with stainless steel top; stainless steel canopy; white lights; U.V. stabilized polycarbonate side panels; differential pressure gauge and an extra electrical point with switch.

Unidirectional Vertical Flow Clean Air Systems in S.S. 304 or GI powder coated CONSTRUCTION and comprising, as standard features, MINIPLEAT HEPA filter/s (99.97% efficiency with 0.3 micron filtration); motor blower assembly/ies; prefilter/s (5 micron); white lights; ceiling suspension arrangement; Differential Pressure Gauge/s; Feather Touch ON/OFF switches for blower & lights.

Unidirectional Vertical Air Flow Clean Air Work Stationing S.S. 304 or GI CONSTRUCTION and comprising, as standard features, MINIPLEAT HEPA filter/s with 0.3 micron filtration; prefilter/s (5 micron); suitable motor blower assembly/ies; table with stainless steel top; stainless steel canopy; white lights; U.V. stabilised polycarbonate side panels; differential pressure gauge and an extra electrical point with switch

Vertical Laminar Down flow Biological safety cabinet in SS 304 or GI & comprising stander features with 0.3 micron heapa filtration, pre-filtration 5 micron, UV, suitable blower motor assemblies, differential pressure gauge and an extra electrical point with switch.

MOC-18 G GI Powder coated with bottom operating arrangement & Bottom Loading filter arrangement. SS 304, Aluminum powder coated Perforated sheet with capsule Punching. Terminal Boxes can be made tailor customer specifications

Garment Storage Cubicles feed HEPA filtered air to help build and maintain a controlled microenvironment for storage of your contamination control apparel.

Dampers are used to cut-off HVAC, Air conditioning heating or cooling to an unused area. Also use to regulate room temperature or other environmental parameters. We provide Volume control Dampers, Fire damper, Collar damper etc.

The VRF(Variable Refrigerant Flow) system is the latest and most glamorous entrant into the packaged air conditioner market. This technology originated in Japan and is now picking up in China and Korea. At present there are more than 20 manufacturers of VRF type products in the world.In general, VRFs consist of a number of indoor units connected to a single outdoor unit. They allow refrigerant flow from the outdoor unit to be varied. The technology used is either an inverter-driven compressor for speed control or a digital scroll compressor. A VRF system is provided with only one distribution port on the outdoor unit. Each indoor unit is provided with an electronic expansion valve, which continually adjusts the flow of refrigerant to respond to the load requirements in individual areas. Thus the temperature inside is maintained at virtually constant levels as against the variation caused due to on off cycles of conventional packaged ACs. For larger capacities, multiple outdoor units can be used.Being modular, outdoor units are so compact that they can be carried through commercial freight elevators. Another advantage is that it can accommodate relatively larger lengths of refrigerant piping. VRF is easy to install, run and maintain as compared to conventional Chilled Water Air-conditioning plant.With Digital Scroll: The Digital Scroll compressor modulates the refrigerant flow to meet varying cooling loads and deliver enormous saving on electricity bills. This high technology compressor coupled with advance controllers makes it a very effective refrigeration system.

Air Shower, self contained factory assembled system in S.S. 304 CONSTRUCTION designed to deliver a spray of moving air at approximately 6000 ft. per minute, from adjustable nozzles in the ceiling and opposing walls to departiculate fully gowned personnel just before they enter controlled environments.

Our filters are well known for their impeccable craftsmanship, quality and reliability of performance, and quiet and cost efficient operation. We also provide Hepa filters for any biological safety cabinet, laminar flow hood, or air handler. HEPA air purifiers come with a pre-filter to filter out large particulate, a carbon filter to adsorb odors, and a HEPA filter to filter particulate down to 0.3 microns in size.

MOC-18 G GI Powder coated with bottom operating arrangement & Bottom Loading filter arrangement. SS 304, Aluminum powder coated Perforated sheet with capsule Punching. Terminal Boxes can be made tailor customer specifications.

ouble Skin Air Handling Units completely redesigned with a 'Screwless Cabinet' construction. These units have a casing made of sandwiched panels, resulting in low noise, sturdy construction and better thermal insulation. Taper wedges are used for fixing and locking the insulated panels with aluminum frame.

Double skin Air Handling Units having Non thermal break and complete with mixing plenum, stainless steel drain tray, 6 Row DX cooling coil, fresh air intake having damper, 10 Micron pre-filter section, 5 micron Microvee filters, Kruger make Blower with flexible connection, crompton make motor and belt drive package.

Dynamic Pass Box In S.S. 304 (18 G) Double Walled Construction having built-in coving on all four inside corners with HEPA Filtered Air, and comprising, as standard features; prefilter (5 micron); motor-blower assembly/ies; MINIPLEAT HEPA filter/s (99.995% efficiency with 0.3 micron filtration); recirculatory plenum; fully toughened glass doors, Differential Pressure Gauge/s; stainless steel flanges (40mm) on entry side; ON / OFF switches for blower & lights; electromagnetic interlocking arrangement with GO-NO-GO indication.

Unidirectional Horizontal Air Flow Clean Air Work Station in S.S. 304 CONSTRUCTION and comprising, as standard features, MINIPLEAT HEPA filter/s with 0.3 micron filtration; prefilter/s (5 micron); suitable motor blower assembly lies; table with stainless steel top; stainless steel canopy; white lights; U.V. stabilized polycarbonate side panels; differential pressure gauge and an extra electrical point with switch.

Unidirectional Vertical Flow Clean Air Systems in S.S. 304 or GI powder coated CONSTRUCTION and comprising, as standard features, MINIPLEAT HEPA filter/s (99.97% efficiency with 0.3 micron filtration); motor blower assembly/ies; prefilter/s (5 micron); white lights; ceiling suspension arrangement; Differential Pressure Gauge/s; Feather Touch ON/OFF switches for blower & lights.

Unidirectional Vertical Air Flow Clean Air Work Stationing S.S. 304 or GI CONSTRUCTION and comprising, as standard features, MINIPLEAT HEPA filter/s with 0.3 micron filtration; prefilter/s (5 micron); suitable motor blower assembly/ies; table with stainless steel top; stainless steel canopy; white lights; U.V. stabilised polycarbonate side panels; differential pressure gauge and an extra electrical point with switch

Vertical Laminar Down flow Biological safety cabinet in SS 304 or GI & comprising stander features with 0.3 micron heapa filtration, pre-filtration 5 micron, UV, suitable blower motor assemblies, differential pressure gauge and an extra electrical point with switch.

MOC-18 G GI Powder coated with bottom operating arrangement & Bottom Loading filter arrangement. SS 304, Aluminum powder coated Perforated sheet with capsule Punching. Terminal Boxes can be made tailor customer specifications

Garment Storage Cubicles feed HEPA filtered air to help build and maintain a controlled microenvironment for storage of your contamination control apparel.