Raj Water Pvt. ltd

Andheri East, Mumbai, Maharashtra

The Brewhouse system contains a lot of equipment. A few of the most common elements of the system are Whirlpool kettle, Boiling Kettle, Mash Tun, Lauter Tun, and Hop Dosing Equipment. The equipment that meets all the global quality standards of sanitary 304 stainless steel is primarily used. Our scientific Dimple jacket production technology can utmost ground realizes the effect of heat conduction, use high-quality rock wool or polyurethane materials to insulation for the inner tank, and effectively prevent heat energy leakage from the tank. Advanced Lauter Tun raker system and automatic hydraulic lifting technology, can ensure the mash filter is uniform and comprehensive.

The cooling system includes Chilled Water Tank, refrigerating machine and other line valves equipment, Beer refrigeration system is mainly used for cooling the saccharifying wort and fermentation, it plays an important role in the whole process of brewing beer. Our factory refrigerating machine is home famous brand with stable performance, excellent refrigerating effect, and low accident rate. Optimum allocation of refrigerating system can greatly reduce the wastage of the energy. Ensure the stable operation of the beer brewed.

Fro Storage / Blending / Dispensing / Standardization / Sugar Syrup Preparation.Suitable collect, store, dispense and blend liquids like pulp, juice, beverage, sugar syrup. can be fitted with stirrer or blending device, temperature indicator, liquid level indicator and CIP spraying head.Tanks can be fabricated in SS 304 / 316 in single / double / tripal layer with or without steam jacket insulation.The tanks are welded with smooth inner walls and are finished upto 150 grit finish and are hydraulic tested.Available in capacities from 100-L 15-KL interconnected with centrifugal / screw pumps.

The unfiltered liquid is fed into the filter under positive pressure, where liquid travels in downwards direction and finds its way through opening on sides of the filter plates. As the liquid pressure increases, the filter media holds the foreign particles and allows only clear filtrate to pass through the central channel formed by interlocking pressure cups to the outlet is reached or continued until the cake holding capacity of the unit is reached or until the filtrate rate becomes too slow owing to cake resistance.

Raj Water design and manufacture automatic, cost efficient cleaning-in-place (CIP) system used for cleaning process equipment such as filling machines, pasteurizers, sanitary pipes, tanks, plate heat exchanger etc. with food safety being the number one priority.Raj Water CIP system are supplied on farme mount with a wide range of capacities, CIP circuits, bespoke software and recipes, Raj Water CIP units are designed for 2, 3, or 4 tank systems and from 1 to 4 pressure lines depending on number of circuits and CIP requirements. Each pressure line include a CIP pump, circulation tank, heat exchanger, process valves, flow meter, conductivity meter, sensors and all necessary internal piping and wiring.Raj Water CIP unit automatically controls the cleaning time, detergent temperature, flow and concentration records these parameters continuously and for each cycle for tractability. available semi & fully Automatic Models, Capacity as per Requirement.

Self encapsulated hollow fiber ultra-filtration membrane module (inside out)Operating Mode : Dead-end or cross flow, Back washable.

RO plant design based on Raw Water Quality.Treated Water Quality as per Requirement.Raw Water Feeding Pump.Pressure Sand Filter (FRP).Activated Carbon Filter (FRP).Micron Cartridge Filter Housing.Antiscalant Dosing Pump.Antiscaling Dosing Tank.High Pressure Pump.RO Membrane.Fiber Reinforced Plastic Pressure Vessels.Pressure Gauges.Rota Meters.Control Panel PLC Base.

ETP (Effluent Treatment Plant) is a process design for treating the industrial waste water for its reuse or safe disposal to the environment.Influent: Untreated industrial waste water.Effluent: Treated industrial waste water.Sludge: Solid part separated from waste water by ETP.Need of ETPTo clean industry effluent and recycle it for further use.To reduce the usage of fresh/potable water in Industries.To cut expenditure on water procurement.To meet the Standards for emission or discharge of environmental pollutants from various Industries set by the Government and avoid hefty penalties.To safeguard environment against pollution and contribute in sustainable development.

The series and filter will provide clean and clear water for commercial user, They produce more filtered water with less pump horsepower. The fiberglass winding design enables the filter to be durable, deforming-proof and corrosion design. we will also provide complete swimming pool turnkey project, with all required accessories for our esteemed customers.

inside of bottles are rinsed by spraying water or air or both. Empty bottles are transferred into the rotary rinsing section by an inlet neck guide. The bottles are held from their neck and inverted by a guide rod along their axis. After being sprayed internally, the bottles continue to move inverted for a while to drain the rinse water, after which they are turned back to the upright position.The nozzles have No Bottle No Spray System which is activated only by the presence of bottles, sensed at the in-feed spider. The option of attachment of a independent rinser machine is possible, to build a mono bloc machine of Rinser filler crowner / capper for bottles.Filling The filling operation is by gravity. RECIRCULATING VALVE (mechanical valve) which features 10-15% juice temperature upto the tip of the filling valve constant, hence maintaining product safety without any manual intervention. This valve has a bottom close design and has a zero drip feature after the filling operation, it has CIP features & fills at a very high speed due to its excellent design

RFC series machinery a fully automatic multi function combined machine integrating washing, filling & capping into single body. This machine is equipped with advance man machine inter-facial control technology with all necessary automation. It works hanging neck holding method hence very convenient bottle change over.

Automatic systems for processing and packaging of canned beverages of any size, made of aluminum, steel and tinplate. The range of machines available allows to cover the production requirements up-to 4000 cans hour. These systems are designed to carry out automatically the cycles of filling and seaming of cans and can be completed with transport systems and ancillary machines complying with the customers requirements and respecting the spaces available in the installation rooms.Both the technology that the components used to make this type of equipment are the same used in plants with high productivity.An operator panel allows to control all the operation parameters of the plant

Automatic systems for processing and packaging of canned beverages of any size, made of aluminum, steel and tinplate. The range of machines available allows to cover the production requirements up-to 4000 cans hour. These systems are designed to carry out automatically the cycles of filling and seaming of cans and can be completed with transport systems and ancillary machines complying with the customers requirements and respecting the spaces available in the installation rooms.Both the technology that the components used to make this type of equipment are the same used in plants with high productivity.An operator panel allows to control all the operation parameters of the plant