Rajdeep Creations

Uttam Nagar, delhi

Specification :

• Our wheel works on specially designed 1 H.P. single phase D.C. Motor having
• 220V.
• Specially designed Nob System which helps in Increasing & reducing speed of
• the wheel according to your requirement & due to this clay can be moulded
• easily.
• Motor is fitted in sheet metal box with tray on top.
• Motor is fitted on wooden sheet so there is no danger from current supply
• Working plate made from cast Iron of 12" diameter is fitted at top of the box.
• Overall size L- 22", B- 18", H- 20" & Weight- 45 Kg. (Approx.)

Features :

• NOB is provided to get Variable speed (From Oto 250 RPM) according to your
• requirement.
• Clay throwing capacity is around 45 Kgs. (Approx.) on using BAT of 14"
• No vibration & no speed reduction during shaping the articles.
• MCB switch is provided for short circuit protection.
• Fan located within motor is used for cooling the motor.
• Box & Tray are powder coated for long life.
• A whole is provided for water discretion.
• Easy to operate.
• Low electricity consumption.

Specification :

• Our wheel works on specially designed 1/2 H.P. single phase 220 Volt A.C. Motor.
• Motor is fitted in Vertical side of tri-Angle.
• Motor is fitted on wooden sheet so there is no danger from current supply
• Working plate made from cast Iron - Sizes Available 12" in diameter
• Overall size L- 18", B- 12", H-15" & Weight- 22 Kg. (Approx.)

Features :

• Pulley is provided to get three different constant speeds as 120 RPM, 180 RPM, and 240
• RPM.
• Clay throwing capacity is around 15 Kg. (Approx.)
• No vibration & no speed reduction during shaping the articles.
• Fan located within motor is used for cooling the motor.
• Easy to operate.
• Low electricity consumption

Features & Specification :

• Turn table having cast iron plate of 1O" diameter.
• Height is 7"

Specification :

• Our wheel works on specially designed 1/2 H.P. single phase A.C. Motor having
• 220 V motor.
• Motor is fitted in Vertical side of tri-Angle.
• Motor is fitted on wooden sheet so there is no danger from current supply
• Working plate made from cast Iron - Sizes Available 19" in diameter.
• Overall size L- 24", B- 16", H- 15" & Weight- 35 Kg. (Approx.)

Features :

• Pulley is provided to get three different constant speeds as 80 RPM, 120 RPM,
• and 160 RPM.
• Clay throwing capacity is around 45 Kg. (Approx.)
• No vibration & no speed reduction during shaping the articles.
• Fan located within mQtor is used for cooling the motor.
• Easy to operate, portable, robust construction to withstand rough handling.
• Low electricity consumption.

Specification :

• Our wheel works on specially designed 1/2 H.P. single phase A.C. Motor having
• 220 V motor.
• Motor is fitted in Vertical side of tri-Angle.
• Motor is fitted on wooden sheet so there is no danger from current supply
• Working plate made from cast Iron - Sizes Available 19" in diameter
• Overall size L- 24", B- 16", H- 15" & Weight- 32 Kg. (Approx.)

Features :

• Pulley is provided to get three different constant speeds as 80 RPM, 120 RPM,
• and 160 RPM.
• Clay throwing capacity is around 35 Kg. (Approx.)
• No vibration & no speed reduction during shaping the articles.
• Fan located within mC!ltor is used for cooling the motor.
• Easy to operate.
• Low electricity consumption.

Specification :

• Our wheel works on specially designed 1/2 H.P. single phase 220 Volt A.C. Motor.
• Motor is fitted in Vertical side of tri-Angle.
• Motor is fitted on wooden sheet so there is no danger from current supply
• Working plate made from cast Iron - Sizes Available 15" in diameter
• Overall size L- 18", B- 15", H-15" & Weight- 25 Kg. (Approx.)

Features :

• Pulley is provided to get three different constant speeds as 95 RPM, 145 RPM, and 190
• RPM.
• Clay throwing capacity is around 25 Kg. (Approx.)
• No vibration & no speed reduction during shaping the articles.
• Fan located within motor is used for cooling the motor.
• Easy to operate.
• Low electricity consumption