Other Products / Services #5326574

This combo line consists of four extruders, screen changers, melt pumps, flat sheet die, Universal Co ex Five Layer blown film die head UCD and fully automatic touch screen based integrated process control panel to give an output of up to 75 kghr. of co extruded barrier sheets or films.

The 3-axis mechanical adjustment system with lateral position control allows quick precise positioning. The double belt haul-off is provided for optimum pulling force and to prevent ovality in pipe.

As a technology partner for polymer producers, developers, universities and processors - Rajoo has consistently followed impelling technological developments in plastics extrusion with its own new developments. As a technology partner for polymer producers, developers, universities and processors - Rajoo has consistently followed impelling technological developments in plastics extrusion with its own new developments. LabEX Combo can be used as a laboratory line for testing and developing of new formulations and products, process and parameter control is of utmost significance. An innovative barrier sheet cum blown film line is one of its kinds in the whole world. This combo line consists of four extruders, screen changers, melt pumps, flat sheet die, Universal Co ex Five Layer blown film die head UCD and fully automatic touch screen based integrated process control panel to give an output of up to 75 kghr. of co extruded barrier sheets or films.

Drip irrigation extrusion systems for round and flat dripper with servo driven dripper insertion device, max output 250kghours. Dripex is equipped with two stainless steel Vacuum sizing tank and cooling System for precise water pressure, high corrosion resistant and long useful life. The 3-axis mechanical adjustment system with lateral position control allows quick precise positioning. The double belt haul-off is provided for optimum pulling force and to prevent ovality in pipe. The drippers are fed by a centrifugal feeder onto a conveyor belt and are advanced via two Inserting Belts. The insertion mechanism is driven by a digital servo motor. The drippers are pushed through a cooled inserting device which is placed inside the cross-head.

thermoforming and vacuum forming machines with fully automatic Servo controlled PLC system and heavy duty hydraulic system are ideal to make disposable glasses, tea cups, water glasses, plates, bowls, trays and other kitchenware products etc from PP, PET, and foam PS. PS foam vacuum formers are used for producing foamed PS products.

Pe Fomex incorporates advanced features like high pressure gas injection pump, volumetric gravimetric 4 component master batch dosing unit mounted on hopper block, melt pressure transducers, hydraulic continuous screen changer with micro processor based circular water temperature controller units, static charge eliminators, automatic turret winder etc based on end application

Dispocon vacuum formers are exceptionally sturdy, durable and low maintenance machines firmly established as industry's most energy efficient and least vibrating vacuum formers with patented trim press.Infrared and Calrod heaters with phase angle temperature control, solid state relays, excellent safety interlocks and central lubricating system are salient part of standard machine.

a wide range of counter rotating twin screw extruders for pipe and profile extrusion systems through a Joint Venture with most reputed pipe and profile extrusion machinery manufacturer in the world Bausano & Figli, Italy. Cpvc pipe plant is one of the best solutions offered by Rajoo Bausano.

Dispocon vacuum formers are exceptionally sturdy, durable and low maintenance machines firmly established as industry's most energy efficient and least vibrating vacuum formers with patented trim press. The offering includes models of both "Rajoo" and "Wonderpack" brands. latest range of thermoforming and vacuum forming machines with fully automatic Servo controlled PLC system and heavy duty hydraulic system are ideal to make disposable glasses, tea cups, water glasses, plates, bowls, trays and other kitchenware products etc from PP, PET, and foam PS. PS foam vacuum formers are used for producing foamed PS products.

LAMINA series of sheet lines are designed for absolute ease of operation and are available in a host of configurations to suit individual customer's requirements with output ranging from 110 kghr to 1000 kghr, width ranging from 540 mm to 1400 mm, in single to five layer configuration for processing various polymers like PS, PP, PE and PET. Lamina rPET sheet line is a star performer suitable to process PET bottle flakes to produce sheet for various applications including thermoforming. LAMINA incorporates advanced features like gravimetric blending dosing, grooved smooth feed barrier screw extruder, vented extruder, melt pump, continuous screen changer, independently driven verticalhorizontalinclined polishing rolls stack, air knife, online thickness monitoring controlling system, anti-static bath, sheet accumulator, Unitilt polishing roll stack for dual requirement of thick and thin sheets, in-line sheet cutter and dual turret winder based on end use. User friendly controllers and indicators located at various operating stations provide for ease in monitoring and control of various critical processing parameters.

Rajoo has done pioneering developments in polymer foam extrusion in India and have emerged as the only supplier of foam extrusion lines christened Fomex using both blown film (Fomex B) and sheet extrusion (Fomex S) process using either chemical or physical foaming. Rajoo offers foam extrusion solutions to produce foam with low density of 0.02 kgm3 to medium density of 0.22 kgm3 and also high density foam with density of 0.45 kgm3. Fomex S sheetlines are offered in capacities from 140kghr to 250kghr and density range of 0.22 to 0.02 using different physical blowing agents. Rajoo is proud to claim that more than 90% of cap liners and foamed banners calendars in India are produced on FOMEX.

blown film lines are available with outputs ranging from 30 kghr to 1000 kghr and lay-flat widths ranging from 50 mm to 5000 mm for processing polymers as diverse as LD, LLD, HM - HDPE, PP. FOILEX mono layer blown film lines are also available in special configurations to process HDPE rich films both through high stalk bubble and low frost line height bubbles.

Rajoo offers widest range of customized monolayer blown film lines FOILEX, to suit a broad spectrum of resins, applications and output levels. Customers opting for FOILEX can therefore be sure to produce best film quality with economical use of resources, short start-up and low change-over times as well as reduced waste and high productivity. FOILEX - series of monolayer blown film lines are available with outputs ranging from 30 kghr to 1000 kghr and lay-flat widths ranging from 50 mm to 5000 mm for processing polymers as diverse as LD, LLD, HM - HDPE, PP. FOILEX mono layer blown film lines are also available in special configurations to process HDPE rich films both through high stalk bubble and low frost line height bubbles. FOILEX incorporates advanced features like-grooved feed section, barrier screw, gravimetric blendingdosing system, Liquid PIB dosing system, manual as well as pneumatic screen changer, oscillating haul-off, internal bubble cooling, automatic bubble cage, online thickness monitoring and control and surface winders with taper tension control.

The systems are customized to the specific requirements of the customer with complementary machines and dimensions in line with the requirement. These are able to produce flexible, medical and irrigation pipe and rigid PVC and polyolefin pipe, with single or double outlet and with complete downstream assemblies.

A wide range of counter rotating twin screw extruders for pipe and profile extrusion systems through a Joint Venture with most reputed pipe and profile extrusion machinery manufacturer. For the production of rigid and flexible pipe in thermoplastic materials, Rajoo Bausano offers the MD PLUS series high production twin screw extruders and a complete range of complementary accessories for calibration, cooling, movement and cutting. The systems are customized to the specific requirements of the customer with complementary machines and dimensions in line with the requirement. These are able to produce flexible, medical and irrigation pipe and rigid PVC and polyolefin pipe, with single or double outlet and with complete downstream assemblies.

Multifoil co-ex blown film lines are backed by proven engineering experience of Rajoo for over two decades and are available in the widest range from two layer configuration for general purpose packaging film to nine layer line for barrier and technical grade films with output ranging from 120kghr to 1200 kghr and lay-flat width ranging from 600mm to 5000mm.

Multifoil co-ex blown film lines are backed by proven engineering experience of Rajoo for over two decades and are available in the widest range from two layer configuration for general purpose packaging film to nine layer line for barrier and technical grade films with output ranging from 120kghr to 1200 kghr and lay-flat width ranging from 600mm to 5000mm.

AQUAFLEX blown film lines are downward extrusion water quenched universal application film lines to produce various combinations of PP and PE grades tailored to customer's specific requirements. The lines are capable to process LD, LLD, HD, PP and EVA. For narrow width bags a twin die-head downward extrusion blown film line is also offered to produce narrow width PP bags for grocery packaging application. These lines are extremely energy efficient and give optimum production rate which makes investment to installed capacity ratio much favorable. Also available is the Multilayer PPTQ film line to produce a substitute film for the less stringent application of BOPP and CPP Films. With the core layer of sealant polymer grade, the outer layer could be of a designer resin grade or a simple homopolymer for achieving the appropriate property mix. AQUAFLEX is available up to 3 layer configuration to produce variety of films with output of upto 150kghour.