• Maximum Grinding Length500/600mm
• Maximum Height of Centres130 mm
• Maximum Swing over bed259 mm
• M aximum grinding diameter100 mm
• Table feedHydraulic, infinitely variable
• Range of the table Feed per minute0.05/1-5 m/min
• Maximum table swivel.7 °+ 3° = 10°
• Hydraulic power motor.75 Kw
• Workhead Swivel on either side90° towards wheelhead & 30° away from wheelhead for all models
• Workspindle speeds4
• Workspindle speeds range65, 140, 205 & 300 RPM
• Workhead motor0.37 Kw.
• Taper in workspindleNo. 3 Morse
• Taper in tailspindleNo. 3 Morse
• To and fro swivel of wheelhead at base60° towards workhead & 45° towards tailstock for all models
• Transverse movement of wheelhead max125 mm
• Size of grinding wheel.354 x 40 x 127 mm
• Min. dia of worn out wheel.205 mm
• RPM of grinding wheel.1750/2000
• Wheelhead motor.2.2Kw.
• Max. & Min. dia of hole for grinding.50 to 18 mm
• Min. & Max. dia of lnternal grinding wheel.12 to 40 mm
• Motor for internal attachment..75 Kw.
• coolant pump motor.0.07 Kw
• Approximate gross weight with packing.2400/2500 Kg

• Can cut round bar upto (in | MM)7” | 175
• Square bar upto (in | MM)7” | 175
• 450 upto[against order only{IN | MM}21/2” | 63
• Strokes(approx)51/2” | 140
• Electric motor required1H.P
• R.P.M(Motor) + 15%1400
• Blade size(inch)12” or 14”
• mm305 or 356
• Length overall(approx) INCH3’-4”
• Interference (mm)1015
• Width overall(approx) INCH2’
• Interference sizes(mm)1066
• V-Belts Required3 Nos
• Space Required48”X26”
• Weight with packing(kgs)400
• Oil cap in tank11/2 Ltr

• Swing over table(Dia)230 mm
• Maximum distance between centres305 mm
• Table longitudinal traverse325 mm
• Table cross traverse200 mm
• Table dimensions530 X 142 mm
• Tee slots width10 mm
• Centre of wheel above table290 mm
• Table swivel90°
• Head Swivel360 °
• Griding Spindle speed2800 rpm
• H.P. of motor1 HP
• Floor are occupred900 X 750 mm
• Height of the machine1550 mm

The Sturdy construction of all passes guarantees stability and durability .The Press is provided within a 2 stage hand pump. The low pressure pump is used for a rapid advance of piston at low pressure. The high pressure pump is provided with a special material lining and is used for slow advance at high pressure. This is provided for rising and lowering the table is smooth running. During operation the table is fastened by means of pin. The press has been all welded Standard accessories and planned off V block for straightenin

• Stroke6”
• 8”10”
• 10 to 13”12”
• 14”18”
• 18”19”
• 11”13”
• 15”18”
• 20”24”
• Longitudinal Movement8”
• 10”10 ”
• 12”15”
• 16”18”
• 6”8”
• Cutting speed of ram per minute60-90
• 60-9040-60
• 40-6020-50-80
• 20-50-80Ram adjustment
• Throat depath12”
• 21”H.P. required
• 1 HP2 HP
• 2HP3Hp
• 3HP3HP
• Distance from the tool to main column10”

• Can cut round bar upto (in | MM)7” | 175
• Square bar upto (in | MM)7” | 175
• 450 upto[against order only{IN | MM}21/2” | 63
• Strokes(approx)51/2” | 140
• Electric motor required1H.P
• R.P.M(Motor) + 15%1400
• Blade size(inch)12” or 14”
• mm305 or 356
• Length overall(approx) INCH3’-4”
• Interference (mm)1015
• Width overall(approx) INCH2’
• Interference sizes(mm)1066
• V-Belts Required3 Nos
• Space Required48”X26”
• Weight with packing(kgs)400
• Oil cap in tank11/2 Ltr

• Spindle Hollow38mm
• Range of spindle speeds240-152-380 rpm
• Effctive strokes of capstan slide130mm
• Bore size in hexagonal turrent25 mm
• Centre of holes above turrent slide50mm
• Max. distance b/w spindle nose to turrent face375mm
• cross slide traverse travel140mm
• cross slide of longitudinal travel200mm
• length of bed1275mm
• width of bed180mm
• Height of center above bed160 mm
• floor space required1500mmX800mm
• net weight of machine900kg.
• weight of machinesynthetic enemal Dk Gray.

• Working Surface of the table225 X 450mm
• Maximum height from table to grinding wheel275 mm
• Verticle feed least count0.01 mm
• Cross feed least count0.05 mm
• Spindle speed2800 rpm
• Size of Grinding wheel200 X 13 X 31.75 mm
• Magnetic chuck(recommended)200 X 450 mm
• Electric Motor0.75 kw / 1 hp 3ph / 2800 rpm