Post Buy Requirement
RI
Chennai, Tamil Nadu, India
Add Review

Our Product / Services

  1. Calibrators 4 Products available
  2. Thermocouple 3 Products available
  3. Control Panels 6 Products available
  4. Measuring Instruments & Equipment 3 Products available
  5. Data Loggers 4 Products available
  6. Medical Accessories 6 Products available
  7. Signs 3 Products available
  8. Transmitter Device 3 Products available
  9. Others 28 Products / Services available

Other Products / Services

Chart Recorder Pen, Ribbon And Chart

TUTC Series Input RTD, Thermocouple(JK) selectable, RTD -50.0 to 400.0 C, J 0-600 C, K 0-1250 C Control mode onoff and Time proportional, Hysteresis, Time, Proportional , Offset Selectable , Same controller have SSR and Relay output Control set Point can be set feather touch keys
View Complete Details

High Accuracy Vacuum/Pressure Transmitter

U5100 series pressure transducers from the Microfused line of MEAS over voltage protected to 16Vdc in both positive and reverse polarity solid piece of 17-4PH stainless steel (316L optional) withstands more than 10 million pressure cycles without failure Heavy Industrial - High EMI Rated , Extended temperature range -40 to 125 C Operating Temperature , Accuracy: 0.25% FS BFSL Ranges : 0 Bar to 1000 Bar , Universal Supply 9-30VDC Output :1-5VDC, 0-10 VDC (3Wire), 4-20mA ( 2 wire) Process connection : inch BSPM, only Gage
View Complete Details

SS Thermo Well

The very nature of thermowells lend themselves to custom designs and we invite our customers to send us drawings of their requirements. We strive to give you a competitive quotation within 24 hours if you can provide us all the necessary date on our inquiry sheet. All of our thermowells can be provided with material certification if required. We work in a wide variety of metals, and in general we can provide 72 hours service for our standard material such as Brass, 304 Stainless Steel, and 316 Stainless Steel. In addiction we are also very competitive in Carbon Steel, Haste alloy, Alloy 20, Titanium, Monel and Inconel.
View Complete Details

Humidity Chamber

Rasci Heating Cooling Chamber outer fabrication of Mild steel with powder coated and Inner Fabrication of Stainless Steel .The RHCC are insulated with ceramic fiber mat to reduce the radiation Cool loss to Minimum This is suitable for Low Temperature Process Testing application. High accuracy temperature controller With Tyristor Contactor based control circuit. The RHCC Cooled by High Quality Compressor and Maintain Temperature use Heater .Insulation with high quality superior quality Insulator. The temperature inside is maintained any desired level with in the operating range by a digital automatic temperature controller and Mp based high accuracy customized controller
View Complete Details

Hot Bench With Two Zone PID Controller

Rasci Mp based Hot Bench outer fabrication of stainless steel Inter space in between the walls is tightly packed with special grade ceramic blanket. Inner chamber accommodates perforated stainless steel. RHBP provided power on indication and heater on indication forSafety with high quality locking arrangements. This is specially for Lab chemical test and low temperature maintain test with time control Fully solid state control . The hot bench heated by nichrome band Heater. The temperature inside is maintained any operating range by a digital automatic temperature controller and Mp based high accuracy customized controller With Strip chart Recorder , Temperature data logger for PC interfacing , Direct printer port and Suitable software package. Available Ranges 30 C
View Complete Details

Industrial Electric Hot Air Oven

Rasci Oven outer fabrication of Mild steel with powder coated Inter space in between the walls is tightly packed with special grade glass wool. Inner chamber accommodates perforated stainless steel Trays at adjustable heights. Insulated double walled door in the front is Provided with high quality locking arrangements. This is provided with single Door with 100 mm thick glass wool insulation mounted. Heavy Duty air circulation fan for maintain the uniformity . The oven heated by nichrome strip Heater. The temperature inside is maintained any operating range by a digital automatic temperature controller and Mp based high accuracy customized control panel, With Strip chart Recorder , Temperature data logger for PC interfacing , Direct printer port and Suitable software package. Available Ranges 50 C 450C , sizes available as per customized
View Complete Details

High Temperature Calibration Bath

Rasci calibration bath outer fabrication of Mild steel with powder coated The RTCH are insulated with high alumina insulation brick work Followed by and ceramic fiber mat to reduce the radiation heat loss to Minimum This is suitable for thermocouple and Rtd sensors calibration Meth od of master Comparison. High accuracy temperature controller With Tyristor based control circuit. The RTCH heated by kanthal A1 Heating coils. Insulation with high q uality superior quality ceramic fiber Blanket. The temperature inside is maintained any desired level with in the operating range by a digital automatic PC based temperature controller Available Ranges 50 C 300C, 600C and 1200C
View Complete Details

Low Temperature Calibration Bath

Rasci calibration bath outer fabrication of Mild steel with powder coated and Inner Fabrication of Stainless Steel .The RTCL are insulated with ceramic fiber mat to reduce the radiation Cool loss to Minimum This is suitable for Low Temperature Sensor, Indicator and Rtd sensors calibration Method of master Comparison. High accuracy temperature controller With Tyristor Contactor based control circuit. The RTCL Cooled by High Quality Compressor and Maintain Temperature use Heater .Insulation with high quality superior quality Insulator.
View Complete Details

Multi Function Process Multimeter

  • Application Calibration Laboratory , production Industries , Institute, Testing & measuring systems, Research Industries, Chemical and aero space , Automotive Industries etc…
Multifunction Process multimeter source and measure Temperature functions , Thermocouples and RTDs Frequency, ohms, mV, Voltage, current , loop power Available PC interface with software Adopt ITS 90 Temperature Scale Used 5 digit LCD display with backlight Good accuracy 0.05 %, Battery Power operated RTC for Thermocouple Calibration 4X1.5 VDC Alkaline Battery for long life
View Complete Details

Regulator Power Supply

  • Applicatiion overload protection (OLP/OCP) to prevent damages resulted from over current. When the rated current is higher than 150%, the output voltage will start to drop automatically ( Transmitters Power safety Device)
Regulator power supply is currently the most widely adopted device TPS series industrial power supply offers users DC24V 12V9V5V with enhanced safety, efficiency and the best power quality. Full MS with powder coated casing for lightweight and corrosion resistant handling 110 or 230 VAC input, Overload protection, Overvoltage protection Thermal protection, Expected lifetime: 10 years For transmitter and sensor purpose Current Rating 50100150200250 mA Panel and wall mounting type
View Complete Details

Switch Mode Power Supply

  • Application overload protection (OLP/OCP) to prevent damages resulted from over current. When the rated current is higher than 150%, the output voltage will start to drop automatically ( Transmitters Power safety Device)
Switch Mode power supply is currently the most widely adopted device TSPS series industrial power supply offers users DC24V 12V9V5V with enhanced safety, efficiency and the best power quality. Full MS with powder coated casing for lightweight and corrosion resistant handling Universal input voltage 100-240VAC, Overload protection, Overvoltage protection Thermal protection, Expected lifetime: 10 years For transmitter and sensor purpose Current Rating 400mA or 1000mA Panel and wall mounting type
View Complete Details

Lab Type Regulator Power Supply

  • Application overload protection (OLP/OCP) to prevent damages resulted from over current. When the rated current is higher than 150%, the output voltage will start to drop automatically ( Transmitters Power safety Device)
Tablet power supply is currently the most widely adopted device TPS series industrial power supply offers users DC24V 12V9V5V with enhanced safety, efficiency and the best power quality. Full MS with powder coated casing for lightweight and corrosion resistant handling 110 or 230 VAC input, Overload protection, Overvoltage protection Thermal protection, Expected lifetime: 10 years For transmitter and sensor purpose Current Rating 50100150200250 mA
View Complete Details

Industrial Switch Mode Power Supply

  • Applications overload protection (OLP/OCP) to prevent damages resulted from over current. When the rated current is higher than 150%, the output voltage will start to drop automatically ( Instruments Power safety Device)
Tablet power supply is currently the most widely adopted device PMC series industrial power supply offers users DC24V (35W, 50W and 100W) and DC12V (35W50W and 100W) models with enhanced safety, efficiency and the best power quality. Full Aluminum casing for lightweight and corrosion resistant handling Universal AC input, Overload protection, Overvoltage protection Thermal protection, Expected lifetime: 10 years international dimension and CE, UL international safety approvals.
View Complete Details

Automatic Water Level Controller

  • Application Control House and Factory water tank level control avoid wastage of water and power saving , chemical and milk production industries etc …
Tempsen online Automatic water and oil Level controller Use mini float and any type of float and limit switch Top water tank control High and low level Option for bottom level control for motor safety We provide motor empty run timer Floats available SS and PVC type with magnetic control Provide LED indication for Motor ON and OFF, water LOW and NORMAL Auto Manual ( By pass) and OFF switches In standard type load 15 Amps , single phase motor optional three phase motor output , size : 192X110X65 mm
View Complete Details

Electronics Energy Saver

  • Application Control House and Factory AC, Refrigerator and Motor control avoid wastage of power , chemical and milk production industries etc …
Tempsen Energy saver save Electric energy ( less EB Bill Value) Single step control and cyclic type control Suitable for AC and motor control application Also available Digital Refrigerator and AC temperature Controller And Digital Electronic Energy Saver also Directly connect Motor or AC not required extra device Provide LED indication for Motor ON and OFF Auto Manual ( By pass) and OFF switches In standard type load 15 Amps , single phase motor optional three phase motor output , size : 192X110X65 mm
View Complete Details

Calibration Services On Lab

  • Application All kind of Process Testing and measuring Instruments , Furnace, Oven, heat/Cool chamber, humidity chamber, pressure gauge, transmitters etc …
Rasci lab calibration services have all range of process control instruments (temperature, humidity, pressure, voltage, current, flow etc) mechanical measuring instruments ( vernier caliber, measuring scale, micrometer, height gauge etc) , thermal calibration mapping & validation at site . On site calibration process control instruments , furnace, oven humidity and temperature chamber , clean room etc we have high accuracy calibrators with traceable from national standard laboratories. We provide proper calculated calibration certificate suitable for iso 9000 and quality assurance. We maintain periodically calibration chart.
Rasci also undertaken service, amc, consultant service and site calibration. Our technical supported with etdc trained engineers find out solution on technical issues related to and instruments range or products at anytime.we provide calibration instruments with national standards traceability certificate from nabl labs. An iso 9001 : 2008 quality certified.
View Complete Details

Heating Process Testing Onsite

  • Application Heat Treatment, Production industries, SR test, automotive industries, welding industries, Aero space Calibration of thermocouple, and suitable testing , calibration labs etc…
Rasci Onsite Heating Process test with Temperature Logging system . Heating element with high quality ceramic Beats with ceramic fiber blankets on surrounded by testing product and thermocouple connected to the job measure and control the temperature, used nycrom Heating coils, insulation with high quality ceramic fiber blanket, The temperature inside is maintained any desired level with in the operating range by a digital automatic temperature controller and mp based high accuracy customized control panel with strip chart recorder
Temperature data logger for PC interfacing , Memory storage 1000 data per channel Direct printer port and Suitable software package. The calibration bath is compact size, priced very competitive. The unit can be drawn from the front for Easy servicing. An ISO 9001 : 2008 Quality Certified. Avilable Ranges 50C 1200C sizes available as customized application
View Complete Details

Maintenance Services On Site

  • Application All kind of Process Testing and measuring Instruments , Furnace, Oven, heat/Cool chamber, humidity chamber, pressure gauge, transmitters etc …
Rasci Site services have all range of process control Instruments (Temperature, Humidity, pressure, voltage, current, flow etc) mechanical measuring instruments ( vernier caliber, measuring scale, Micrometer, height gauge etc) , thermal calibration mapping & validation At site . On site calibration process control instruments , furnace, oven Humidity and temperature chamber , clean room etc we have high Accuracy calibrators with traceable from national standard laboratories. We provide proper calculated calibration certificate suitable for ISO 9000 And quality assurance. We maintain periodically calibration chart.
Rasci also undertaken service, AMC, consultant service and site calibration. Our technical supported with ETDC trained engineers find out solution on Technical issues related to and instruments range or products at anytime.We provide calibration instruments with national standards traceability certificate from NABL labs. An ISO 9001 : 2008 Quality Certified.
View Complete Details

PID CONTROLLER

1,600 /Piece Get Latest Price
  • Type Pid Controllers
  • Material Aluminium, Plastic, Stainless Steel
  • Certification CE Certified, ISO 9001:2008
  • Voltage 110V, 220V
  • Condition New Used
  • Rated Power 100W, 200W, 250W, 40W
  • Power Source Battery, Electric
  • Feature Durable, High Accuracy, Light Weight, Low Power Consumption, Stable Performance
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • T. Ajitha (Rasci Instruments)
  • Plot No. 2 & 3, Balaji Nagar, 4th Street, Mettukuppam Thoraipakkam, Chennai, Tamil Nadu - 600097, India
  • Share us via
High Accuracy Vacuum/Pressure Transmitter Hot Bench with Two Zone PID Controller from Chennai, Tamil Nadu
Post Buy Requirement
RI
Chennai, Tamil Nadu, India
Add Review

Our Product / Services

  1. Thermocouple 3 Products available
  2. Control Panels 6 Products available
  3. Measuring Instruments & Equipment 3 Products available
  4. Data Loggers 4 Products available
  5. Medical Accessories 6 Products available
  6. Signs 3 Products available
  7. Transmitter Device 3 Products available
  8. Calibrators 4 Products available
  9. Others 28 Products / Services available

Other Products / Services

Chart Recorder Pen, Ribbon And Chart

TUTC Series Input RTD, Thermocouple(JK) selectable, RTD -50.0 to 400.0 C, J 0-600 C, K 0-1250 C Control mode onoff and Time proportional, Hysteresis, Time, Proportional , Offset Selectable , Same controller have SSR and Relay output Control set Point can be set feather touch keys
View Complete Details

High Accuracy Vacuum/Pressure Transmitter

U5100 series pressure transducers from the Microfused line of MEAS over voltage protected to 16Vdc in both positive and reverse polarity solid piece of 17-4PH stainless steel (316L optional) withstands more than 10 million pressure cycles without failure Heavy Industrial - High EMI Rated , Extended temperature range -40 to 125 C Operating Temperature , Accuracy: 0.25% FS BFSL Ranges : 0 Bar to 1000 Bar , Universal Supply 9-30VDC Output :1-5VDC, 0-10 VDC (3Wire), 4-20mA ( 2 wire) Process connection : inch BSPM, only Gage
View Complete Details

SS Thermo Well

The very nature of thermowells lend themselves to custom designs and we invite our customers to send us drawings of their requirements. We strive to give you a competitive quotation within 24 hours if you can provide us all the necessary date on our inquiry sheet. All of our thermowells can be provided with material certification if required. We work in a wide variety of metals, and in general we can provide 72 hours service for our standard material such as Brass, 304 Stainless Steel, and 316 Stainless Steel. In addiction we are also very competitive in Carbon Steel, Haste alloy, Alloy 20, Titanium, Monel and Inconel.
View Complete Details

Humidity Chamber

Rasci Heating Cooling Chamber outer fabrication of Mild steel with powder coated and Inner Fabrication of Stainless Steel .The RHCC are insulated with ceramic fiber mat to reduce the radiation Cool loss to Minimum This is suitable for Low Temperature Process Testing application. High accuracy temperature controller With Tyristor Contactor based control circuit. The RHCC Cooled by High Quality Compressor and Maintain Temperature use Heater .Insulation with high quality superior quality Insulator. The temperature inside is maintained any desired level with in the operating range by a digital automatic temperature controller and Mp based high accuracy customized controller
View Complete Details

Hot Bench With Two Zone PID Controller

Rasci Mp based Hot Bench outer fabrication of stainless steel Inter space in between the walls is tightly packed with special grade ceramic blanket. Inner chamber accommodates perforated stainless steel. RHBP provided power on indication and heater on indication forSafety with high quality locking arrangements. This is specially for Lab chemical test and low temperature maintain test with time control Fully solid state control . The hot bench heated by nichrome band Heater. The temperature inside is maintained any operating range by a digital automatic temperature controller and Mp based high accuracy customized controller With Strip chart Recorder , Temperature data logger for PC interfacing , Direct printer port and Suitable software package. Available Ranges 30 C
View Complete Details

Industrial Electric Hot Air Oven

Rasci Oven outer fabrication of Mild steel with powder coated Inter space in between the walls is tightly packed with special grade glass wool. Inner chamber accommodates perforated stainless steel Trays at adjustable heights. Insulated double walled door in the front is Provided with high quality locking arrangements. This is provided with single Door with 100 mm thick glass wool insulation mounted. Heavy Duty air circulation fan for maintain the uniformity . The oven heated by nichrome strip Heater. The temperature inside is maintained any operating range by a digital automatic temperature controller and Mp based high accuracy customized control panel, With Strip chart Recorder , Temperature data logger for PC interfacing , Direct printer port and Suitable software package. Available Ranges 50 C 450C , sizes available as per customized
View Complete Details

High Temperature Calibration Bath

Rasci calibration bath outer fabrication of Mild steel with powder coated The RTCH are insulated with high alumina insulation brick work Followed by and ceramic fiber mat to reduce the radiation heat loss to Minimum This is suitable for thermocouple and Rtd sensors calibration Meth od of master Comparison. High accuracy temperature controller With Tyristor based control circuit. The RTCH heated by kanthal A1 Heating coils. Insulation with high q uality superior quality ceramic fiber Blanket. The temperature inside is maintained any desired level with in the operating range by a digital automatic PC based temperature controller Available Ranges 50 C 300C, 600C and 1200C
View Complete Details

Low Temperature Calibration Bath

Rasci calibration bath outer fabrication of Mild steel with powder coated and Inner Fabrication of Stainless Steel .The RTCL are insulated with ceramic fiber mat to reduce the radiation Cool loss to Minimum This is suitable for Low Temperature Sensor, Indicator and Rtd sensors calibration Method of master Comparison. High accuracy temperature controller With Tyristor Contactor based control circuit. The RTCL Cooled by High Quality Compressor and Maintain Temperature use Heater .Insulation with high quality superior quality Insulator.
View Complete Details

Multi Function Process Multimeter

  • Application Calibration Laboratory , production Industries , Institute, Testing & measuring systems, Research Industries, Chemical and aero space , Automotive Industries etc…
Multifunction Process multimeter source and measure Temperature functions , Thermocouples and RTDs Frequency, ohms, mV, Voltage, current , loop power Available PC interface with software Adopt ITS 90 Temperature Scale Used 5 digit LCD display with backlight Good accuracy 0.05 %, Battery Power operated RTC for Thermocouple Calibration 4X1.5 VDC Alkaline Battery for long life
View Complete Details

Regulator Power Supply

  • Applicatiion overload protection (OLP/OCP) to prevent damages resulted from over current. When the rated current is higher than 150%, the output voltage will start to drop automatically ( Transmitters Power safety Device)
Regulator power supply is currently the most widely adopted device TPS series industrial power supply offers users DC24V 12V9V5V with enhanced safety, efficiency and the best power quality. Full MS with powder coated casing for lightweight and corrosion resistant handling 110 or 230 VAC input, Overload protection, Overvoltage protection Thermal protection, Expected lifetime: 10 years For transmitter and sensor purpose Current Rating 50100150200250 mA Panel and wall mounting type
View Complete Details

Switch Mode Power Supply

  • Application overload protection (OLP/OCP) to prevent damages resulted from over current. When the rated current is higher than 150%, the output voltage will start to drop automatically ( Transmitters Power safety Device)
Switch Mode power supply is currently the most widely adopted device TSPS series industrial power supply offers users DC24V 12V9V5V with enhanced safety, efficiency and the best power quality. Full MS with powder coated casing for lightweight and corrosion resistant handling Universal input voltage 100-240VAC, Overload protection, Overvoltage protection Thermal protection, Expected lifetime: 10 years For transmitter and sensor purpose Current Rating 400mA or 1000mA Panel and wall mounting type
View Complete Details

Lab Type Regulator Power Supply

  • Application overload protection (OLP/OCP) to prevent damages resulted from over current. When the rated current is higher than 150%, the output voltage will start to drop automatically ( Transmitters Power safety Device)
Tablet power supply is currently the most widely adopted device TPS series industrial power supply offers users DC24V 12V9V5V with enhanced safety, efficiency and the best power quality. Full MS with powder coated casing for lightweight and corrosion resistant handling 110 or 230 VAC input, Overload protection, Overvoltage protection Thermal protection, Expected lifetime: 10 years For transmitter and sensor purpose Current Rating 50100150200250 mA
View Complete Details

Industrial Switch Mode Power Supply

  • Applications overload protection (OLP/OCP) to prevent damages resulted from over current. When the rated current is higher than 150%, the output voltage will start to drop automatically ( Instruments Power safety Device)
Tablet power supply is currently the most widely adopted device PMC series industrial power supply offers users DC24V (35W, 50W and 100W) and DC12V (35W50W and 100W) models with enhanced safety, efficiency and the best power quality. Full Aluminum casing for lightweight and corrosion resistant handling Universal AC input, Overload protection, Overvoltage protection Thermal protection, Expected lifetime: 10 years international dimension and CE, UL international safety approvals.
View Complete Details

Automatic Water Level Controller

  • Application Control House and Factory water tank level control avoid wastage of water and power saving , chemical and milk production industries etc …
Tempsen online Automatic water and oil Level controller Use mini float and any type of float and limit switch Top water tank control High and low level Option for bottom level control for motor safety We provide motor empty run timer Floats available SS and PVC type with magnetic control Provide LED indication for Motor ON and OFF, water LOW and NORMAL Auto Manual ( By pass) and OFF switches In standard type load 15 Amps , single phase motor optional three phase motor output , size : 192X110X65 mm
View Complete Details

Electronics Energy Saver

  • Application Control House and Factory AC, Refrigerator and Motor control avoid wastage of power , chemical and milk production industries etc …
Tempsen Energy saver save Electric energy ( less EB Bill Value) Single step control and cyclic type control Suitable for AC and motor control application Also available Digital Refrigerator and AC temperature Controller And Digital Electronic Energy Saver also Directly connect Motor or AC not required extra device Provide LED indication for Motor ON and OFF Auto Manual ( By pass) and OFF switches In standard type load 15 Amps , single phase motor optional three phase motor output , size : 192X110X65 mm
View Complete Details

Calibration Services On Lab

  • Application All kind of Process Testing and measuring Instruments , Furnace, Oven, heat/Cool chamber, humidity chamber, pressure gauge, transmitters etc …
Rasci lab calibration services have all range of process control instruments (temperature, humidity, pressure, voltage, current, flow etc) mechanical measuring instruments ( vernier caliber, measuring scale, micrometer, height gauge etc) , thermal calibration mapping & validation at site . On site calibration process control instruments , furnace, oven humidity and temperature chamber , clean room etc we have high accuracy calibrators with traceable from national standard laboratories. We provide proper calculated calibration certificate suitable for iso 9000 and quality assurance. We maintain periodically calibration chart.
Rasci also undertaken service, amc, consultant service and site calibration. Our technical supported with etdc trained engineers find out solution on technical issues related to and instruments range or products at anytime.we provide calibration instruments with national standards traceability certificate from nabl labs. An iso 9001 : 2008 quality certified.
View Complete Details

Heating Process Testing Onsite

  • Application Heat Treatment, Production industries, SR test, automotive industries, welding industries, Aero space Calibration of thermocouple, and suitable testing , calibration labs etc…
Rasci Onsite Heating Process test with Temperature Logging system . Heating element with high quality ceramic Beats with ceramic fiber blankets on surrounded by testing product and thermocouple connected to the job measure and control the temperature, used nycrom Heating coils, insulation with high quality ceramic fiber blanket, The temperature inside is maintained any desired level with in the operating range by a digital automatic temperature controller and mp based high accuracy customized control panel with strip chart recorder
Temperature data logger for PC interfacing , Memory storage 1000 data per channel Direct printer port and Suitable software package. The calibration bath is compact size, priced very competitive. The unit can be drawn from the front for Easy servicing. An ISO 9001 : 2008 Quality Certified. Avilable Ranges 50C 1200C sizes available as customized application
View Complete Details

Maintenance Services On Site

  • Application All kind of Process Testing and measuring Instruments , Furnace, Oven, heat/Cool chamber, humidity chamber, pressure gauge, transmitters etc …
Rasci Site services have all range of process control Instruments (Temperature, Humidity, pressure, voltage, current, flow etc) mechanical measuring instruments ( vernier caliber, measuring scale, Micrometer, height gauge etc) , thermal calibration mapping & validation At site . On site calibration process control instruments , furnace, oven Humidity and temperature chamber , clean room etc we have high Accuracy calibrators with traceable from national standard laboratories. We provide proper calculated calibration certificate suitable for ISO 9000 And quality assurance. We maintain periodically calibration chart.
Rasci also undertaken service, AMC, consultant service and site calibration. Our technical supported with ETDC trained engineers find out solution on Technical issues related to and instruments range or products at anytime.We provide calibration instruments with national standards traceability certificate from NABL labs. An ISO 9001 : 2008 Quality Certified.
View Complete Details

PID CONTROLLER

1,600 /Piece Get Latest Price
  • Type Pid Controllers
  • Material Aluminium, Plastic, Stainless Steel
  • Certification CE Certified, ISO 9001:2008
  • Voltage 110V, 220V
  • Condition New Used
  • Rated Power 100W, 200W, 250W, 40W
  • Power Source Battery, Electric
  • Feature Durable, High Accuracy, Light Weight, Low Power Consumption, Stable Performance
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • T. Ajitha (Rasci Instruments)
  • Plot No. 2 & 3, Balaji Nagar, 4th Street, Mettukuppam Thoraipakkam, Chennai, Tamil Nadu - 600097, India
  • Share us via