Ratansiri Communications Pvt. Ltd.

Sector 58, Noida, Uttar Pradesh

We are one of the promising Aerial Bunched Cables Manufacturers. The Aerial Bunched Cables (ABC) that we deal in are required for electrical transmission system or a telecommunication line, which is suspended between utility poles or electricity pylons. Aerial Bunched Cables provide safety and reliability compared to other cables. We provide only the best and thus have created repute amid the prominent Aerial Bunched Cables Suppliers in India.

1100 volt Grade Cables are mostly used for distributing power to individual consumers by utility service providers like electricity Bords, electricity distributing authorities. 10000 volts Grade Cables are also use, for the supply of farms, waterworks, transmitters and other facilities outside urban areas. A further common use is the replacement of overhead telecommunication lines, for example, along railway line, by aerial cables as they can be installed on existing poles and make the facility more reliable.

Aerial Cable is more valuable for long term economy, safety and reliability overhead conductor. It is better choice for power distribution in densely populated areas where laying the underground cable is either difficult or extremely expensive.

• Easly Installation in uraban, congested, or forest area.
• Saving in cost .
• Human Safety in case of accidental contacts.
• Water proof System.
• Multiple circuits of Power and Telephone cables could be strung in the same set of poles.

Phase of lighting conductor : Hard drawn Aluminium H2 or H4 grade as per IS : 8130. Messsenger Conductor : Aluminum Silica & Magnesium Alloy used as per IS:398

Ratansiri Communications Aerial Bunched Cables are mainly available in XLPE applied by extrusion process.

Ratansiri Communications Aerial Bunched Cables are mainly available in carbon black. Because the cable remains exposed to sunlight and environment.

FR PVC insulation has better fire retardant properties than normal PVC. This FR PVC compound has a high oxygen and temperature index. The wires are wadded with a flame retardant (FR) PVC compound, which helps to control the spread of fire even at very high temperature. It also protects against electrical shock and short circuit.

• 3 Aluminium conductor, insulated with XLPE Insulation.
• 1 Aluminium conductor with XLPE Insulation (optional).
• One messenger Al-Alloy Conductor(Base or Insulated).

We are one of the well-reckonedLAN Cable Manufacturersand Supplier in India. The assorted range of LAN Cables, Signalling Cables, Structural Cables, etc. that we provide is designed by the experienced professionals having vast industry experience. These Data Cables are cables that lead from your computer to your GPS device. These Cables tend to use the newer USB or the older serial protocol. Buyers can purchase LAN Cables and Structural Cables in a range of specifications from us. We can provide the LAN Cables and Structural Cables in bulk, as per the details specified by the buyers.

Data Cables :These are cables that lead from your computer to your GPS device. These tend to use the newer USB or the older serial protocol.

We are one of the prominent XLPE Cables Manufacturers in India. Our sole Objective is to provide the best XLPE Cable, Cross Linked Polyethene Cables, Insulated Armoured Power Cables, XLPE SWA PVC Cables, Underground High Voltage Cable, Industrial XLPE unarmored Cables, Electrical Specification Wires, etc. to the buyers. Whats more, all our Cables are economically priced too. As a result, we have garnered repute amid the prominent XLPE Cables Suppliers in India.

• Ratansiri CommunicationsPvt. Ltd., pioneered the manufacture of Cross Linked Polyethylene (XLPE) Power Cables in India.
• Dry Cured & Drycooled CCV Line with State-of-the-art extrusion process.
• Design as per Indian and International Standards.
• Approved by leading consultants.

• 1kV upto 33kV
• Aluminium and Copper Conductors
• Single Core Cables upto 1000 sqmm
• Multi Core Cables upto 630 sqmm
• FRLS Sheathed Cables
• Aerial Bunched Cables

Ratansiri is one of the leading Coaxial Cable Manufacturers from India. Our wide range of Cables and Wires including Digital coaxial cable, Industrial Braided Cables, Fiber Optic Cable, Twisted Pair Cables, Twin Satellite Wire, etc. is designed in compliance with the industry defined norms of quality. Our Digital Coaxial Cables and other Coaxial Cables variants are high in demand. Consequently, we have emerged as one of the prominent Coaxial Cables Wholesalers, Coaxial Cables Suppliers and Coaxial Cables Exporters in India. Besides, the available Coaxial Cable For Sale is reasonably priced. Buyers can place orders with us to buy Digital Coax Cable, 50 ohms Corrugated Copper Tube, 50 ohms Radiating, Coaxial Power Cables, Brading Type 50 ohms, Wholesale Coaxial Cables, etc. .

RatansiriCables have the central conductor of solid stranded bare electrolytic grade 99.97% pure copper. The secondary conductor is specially designed with polyaluminium tape, applied longitudinally which overlaps and is bonded on the foam dielectric. Aluminum alloy wire with high tensile strength is braided and applied to the aluminum tape with specified coverage. The cable is then jacketed with a special long lasting UV resistant PVC compound. All Customers specifications are available.

We are positioned amongst the prominent PVC Wires Manufactures in India. ThePVC Cablesas well as PVC Insulated Cables that we provide are designed and manufacturers by the experts. All our PVC Cables conform to the requisite norms of the industry. Furthermore, PVC Insulated Cables are manufactured with Aluminum and Copper conductors confirming to Indian Standards and to International Standards like BS, IEC, etc. Besides, our PVC Cables are approved by leading companies.

Product Range

• PVC insulated Heavy duty cables up to 3.3 kv.
• PVC insulated Control Cables Up to 61 cores in Voltage grade 650/1100 V.
• PVC insulated Mining Cable.
• PVC insulated Flexible Cable.
• PVC insulated electrical wiring Cable.

Manufacturing Range

• Aluminium and Copper Conductors
• Single Core Cables upto 1000sqmm
• Multi Core Cables upto 630 sqmm
• Normal PVC or HR PVC Insulation
• Special purpose FR/FRLS Sheath
• Construction : Armoured, Unarmoured

We are one of the most sought-afterSubmersible Cable Manufacturers. The PVC Insulated & Sheathed 3 core flat submersible cables that we deal in are ideal for usage in submersible pumps in deep wells for irrigation (Direct Burial), drinking water supply, industries, mines, fountains. Our company is the manufacturer of a wide range of Submersible Flat Cables that are designed as per ISI 694:1990. The Submersible 3 Core Flat / Round Cables are amongst our best products offered to the clients. Sheathed Round Submersible Cables are made from bright electrolytic grade copper and a proper care is taken to ensure their highest flexibility and uniform resistance. All our Submersible Pump Cables are highly durable, and we provide these to our clients at the most competitive prices, which are the best in the market as compared to the prices offered by our competitors.

Cable Design:Ratansiri 3 Core Flat /Round Cables are manufactured keeping in mind the severe and difficult conditions in which they are required to perform. The area of installation is physically restrictive, and the environment is very hostile.Ratansiriis designed and manufactured keeping in mind these factors to achieve the highest possible degree of reliability.These are used to connect submersible pump motor with supply lines, The slot available in the tube well being narrow the shape of the cables has to be suited for such an application. Certain striking features of our Flat Submersible Pump cables include excellent resistance to water, moisture, abrasion, grease, oil, long flex life, excellent mechanical & electrical properties.

Ratansiriis a Domestic Cable Manufacturer providing such high-quality House Wiring Cables that consultants, architects and builders never worry about. We are one of the most recommended Electrical Building Wire Manufacturers and our House Wiring Cables and Electrical Building Wires are used by professionals who want the best both inside of India and throughout the world.

We have been in the business of Domestic Cables for more than nineteen years, and have built our reputation through innovative design features and an unflagging dedication to use the best materials and the best manufacturing processes in the production of all cables. Our Domestic Cables and house wiring products are guaranteed and far exceed the ISI certifications. Our Electrical Building Cables are tested at every step of the manufacturing process by experienced engineers, and we are known throughout the construction industry for our quality control, modern manufacturing capabilities and design and manufacturing personnel.

All of our copper conductors are made from high conductivity copper rods. These 8 mm diameter rods are made from 99.97% pure, electrolytic grade, bright annealed bare copper with an excess of 100% conductivity. This grade of copper guarantees a low energy loss due to line irregularities and inefficiencies which can result in lower electric usage. The rod is drawn to the required wire size for the wire that is being manufactured. Annealed plain copper conductors used in flexible cables and cords conform to the requirements of table 3 Class 5 of IS:8130 -1984. Custom sizes can also be made for specific customer needs, as well as custom colors for job specific requirements.

Ratansiri House wires are mainly available readily in PVC insulations & also manufactured in various other insulations like, FR PVC / FRLS PVC / HR PVC / Zero Halogen & PTFE With HR PVC.

The insulation of the wire is achieved by using a Type A PVC compound suitable for a maximum continuous conductor operating temperature of 70 to conform to IS:694-1990. The wire is insulated by means of an extrusion process which generates the required insulation thickness for the job, and they all conform to the requirements set forth in IS:5831-1984.

PVC forms the basis of all of the following forms of insulation, but different formulations have been designed to fit certain legal and customer requirements. If you have any questions about specific applications of any of these insulators or any of our other products please be sure to contact out customer service experts.

FR PVC insulation has better fire retardant properties than normal PVC. This FR PVC compound has a high oxygen and temperature index. The wires are wadded with a flame retardant (FR) PVC compound, which helps to control the spread of fire even at very high temperature. It also protects against electrical shock and short circuit.

Whenever a fire breaks-out in any building/Complex, the burning of wire emanates, the toxic, black smoke, which causes injury and subsequently becomes fatal to the human life. FRLS PVC insulation provides better fire retardant properties than normal PVC & also emits Low Smoke, in case of fire.

Depending on where you live and how a structure is built, some wires may routinely be exposed to temperatures which would degrade wires made from the normal formulations of PVC. To counteract this, Ratansiri has formulated our Heat Resistant PVC insulation to specifically address situations where a heated resistant wire is needed. The HR PVC Insulation ensures stability at conductor temperatures of 85C and 105C and are designed to adhere to the standards set forth in HR85 and HR 105 PVC.

For extreme uses, Ratansiri Zero Halogen insulation holds the highest heat resistance, making it the best flame retardant insulation. This is critical for certain uses, including buildings which would routinely house large numbers of people or critical infrastructure. Zero Halogen insulation requires temperatures in excess of 300C to catch fire with a 1% Oxygen atmosphere.

Zero Halogen is critical when you must maintain control of electrical components for as long as possible if a fire should break out. Because of the high ignition properties of this insulation, the onset of smoke and an extra flame source will help control the spread and devastation of the fire, at least to a small amount.

PTFE with HR105 PVC is designed for high cost and sensitive installations where fire from electrical short circuits may cause damage to human life & property. PTFE can withstand, operating temperature from -650C to +2600C.